CBSE Counselling and Results 2013: May 2013

Friday 24 May 2013

CBSE CLASS XII RESULT 2013 TO BE DECLARED ON 27 TH MAY 10 am

Public Notice :- This is to inform to all the students , that the result for class 12th CBSE board will be declared on 27th may 2013 , 10 am IST ...you can check your results here , at the given following results ! :-

Class XII Result 2013 class 12th result

Wednesday 22 May 2013

DELHI UNIVERSITY (DU) Cutt Off On basis of jee mains 2013 and examination

Cut-off JEE MAINS 2013 scores For DELHI UNIVERSITY CAMPUS

The cut-off JEE MAINS scores for admissions to I Semester 2013-14 to different programmes are given below. This is given here for information on the request of many candidates. Candidates should note that the cut-off scores for the session 2013 - 14

Degree programme at HEAD Campus	Cut-off jee main-2013 score
B.E.(Hons.): Chemical	216
B.E.(Hons.): Civil	210
B.E.(Hons.): Electrical & Electronics	233
B.E.(Hons.): Mechanical	232
B.E.(Hons.): Manufacturing	203
B.Pharm.(Hons.)	160
B.E.(Hons.): Computer Science	156
B.E.(Hons.): Electronics & Instrumentation	231
M.Sc.(Hons.): Biological Sciences	205
M.Sc.(Hons.): Chemistry	214
M.Sc.(Hons.): Economics	111
M.Sc.(Hons.): Mathematics	200
M.Sc.(Hons.): Physics	202
M.Sc.(Tech.): General Studies	204
M.Sc.(Tech.): Finance	282
M.Sc.(Tech.): Information Systems	196

Degree programme at MAIN Campus	Cut-off jee main -2013 score
B.E.(Hons.): Chemical	183
B.E.(Hons.): Electrical and Electronics	203
B.E.(Hons.): Mechanical	226
B.E.(Hons.): Computer Science	213
B.E.(Hons.): Electronics & Instrumentation	202
M.Sc.(Hons.): Biological Sciences	211
M.Sc.(Hons.): Chemistry	176
M.Sc.(Hons.): Economics	182
M.Sc.(Hons.): Mathematics	217
M.Sc.(Hons.): Physics	182
M.Sc.(Tech.): Information Systems	176

Degree programme at OFF Campus	Cut-off jee main-2013 score
B.E.(Hons.): Chemical	183
B.E.(Hons.): Civil	209
B.E.(Hons.): Electrical and Electronics	218
B.E.(Hons.): Mechanical	195
B.E.(Hons.): Computer Science	257
B.E.(Hons.): Electronics & Communication	186
B.E.(Hons.): Electronics & Instrumentation	192
B.E.(Hons.): Manufacturing	180
B.Pharm.(Hons.)	208
M.Sc.(Hons.): Biological Sciences	201
M.Sc.(Hons.): Chemistry	219
M.Sc.(Hons.): Economics	179
M.Sc.(Hons.): Mathematics	176
M.Sc.(Hons.): Physics	179
M.Sc.(Tech.): Information Systems	175

Cut Off marks For Bits Pilani 2013 (bitsat - 2013 ) and counselling procedure

Count Totals

Cut-off BITSAT scores

The cut-off BITSAT scores for admissions to I Semester 2013-14 to different programmes are given below. This is given here for information on the request of many candidates. Candidates should note that the cut-off scores for the session 2013 - 14

Degree programme at Pilani Campus	Cut-off BITSAT-2013 score
B.E.(Hons.): Chemical	316
B.E.(Hons.): Civil	310
B.E.(Hons.): Electrical & Electronics	343
B.E.(Hons.): Mechanical	332
B.E.(Hons.): Manufacturing	303
B.Pharm.(Hons.)	260
B.E.(Hons.): Computer Science	356
B.E.(Hons.): Electronics & Instrumentation	331
M.Sc.(Hons.): Biological Sciences	285
M.Sc.(Hons.): Chemistry	294
M.Sc.(Hons.): Economics	311
M.Sc.(Hons.): Mathematics	300
M.Sc.(Hons.): Physics	302
M.Sc.(Tech.): General Studies	294
M.Sc.(Tech.): Finance	282
M.Sc.(Tech.): Information Systems	296

Degree programme at Goa Campus	Cut-off BITSAT-2013 score
B.E.(Hons.): Chemical	283
B.E.(Hons.): Electrical and Electronics	303
B.E.(Hons.): Mechanical	296
B.E.(Hons.): Computer Science	313
B.E.(Hons.): Electronics & Instrumentation	292
M.Sc.(Hons.): Biological Sciences	271
M.Sc.(Hons.): Chemistry	276
M.Sc.(Hons.): Economics	282
M.Sc.(Hons.): Mathematics	277
M.Sc.(Hons.): Physics	282
M.Sc.(Tech.): Information Systems	276

Degree programme at Hyderabad Campus	Cut-off BITSAT-2013 score
B.E.(Hons.): Chemical	283
B.E.(Hons.): Civil	289
B.E.(Hons.): Electrical and Electronics	298
B.E.(Hons.): Mechanical	295
B.E.(Hons.): Computer Science	307
B.E.(Hons.): Electronics & Communication	306
B.E.(Hons.): Electronics & Instrumentation	292
B.E.(Hons.): Manufacturing	280
B.Pharm.(Hons.)	258
M.Sc.(Hons.): Biological Sciences	271
M.Sc.(Hons.): Chemistry	274
M.Sc.(Hons.): Economics	279
M.Sc.(Hons.): Mathematics	276
M.Sc.(Hons.): Physics	279
M.Sc.(Tech.): Information Systems	275

Friday 17 May 2013

Thappar University Admission and cut off for 2013 !

 Engineering
 Sciences
 Management
Chairman, Board of Governors
Shri. Sudhir Mohan Trehan
Vice Chairman, Board of Governors
Shri. J. S. Neerav
Director (officiating)
Dr. Kuldeep Kumar Raina
Deputy Director
Dr. Kuldeep Kumar Raina
Deans
Faculty Affairs Dr. R. Siddique Resource Planning & Generation Dr. R.S. Kaler Academic Affairs Dr. S.K. Mohapatra Student Affairs Dr. Seema Bawa Research & Sponsored Projects Dr. P.K. Bajpai
Registrar Dr. D. K. Patnaik
Finance Officer Mr. Pankaj Sinha
Officer on Special Duty Shri Chiranjiv Singh
PREFACE
Thapar University (Formerly Thapar Institute of Engineering & Technology) is a premier educational and research Institute located in the 250-acre lush green campus, known as Thapar Technology Campus (TTC), in the historic city of Patiala. It came into existence in 1956 through an imaginative collaboration between the then State of Patiala and the East Punjab States Union (PEPSU), the Central Government and the Patiala Technical Education Trust (PTET) founded by the great captain of Indian Industry, Late Lala Karam Chand Thapar. The goals of the University are embodied in the Trust Deed inked on April 9, 1956. Thapar University is today recognized among the leading privately managed engineering institutions of the country and the best of its kind in the north-western region of India.
Thapar Polytechnic (TP) College established in 1956, Thapar Centre for Industrial Research and Development (TCIRD) established in 1982, Centre of Relevance and Excellence (CORE) and Science and Technology Entrepreneur’s Park (STEP) established by D.S.T., Government of India are other four institutions that exist on Thapar Technology Campus.
As a fitting recognition of its laudable achievements and its pioneering role in promoting the growth and development both at National and International levels, we were granted full autonomy and the status of a Deemed University in 1985 by the MHRD on the recommendations of the UGC.
From the Director’s Desk
Thapar University has a tryst with excellence. We strive for excellence by ensuring a trinity of superlatives- students, faculty and infrastructure; cohabit in a congenial and conducive environment. Since its inception, the University has remained committed to creation, archiving and dissemination of knowledge in Science, Engineering and Technology for the service to the humanity. We aspire to carry out high quality research in the frontiers of technology as well as develop professionals with sound knowledge and skill, respect for profession, social and national values and ethics.
Our journey of 57 years through the horizon of technical education has culminated in an inclusive expansion into all areas of engineering, science and business management. From a beginning as an engineering college offering degrees Electrical, Mechanical and Civil Engineering Thapar University has grown into a University with eight departments, five schools and eight centres offering degrees at undergraduate, postgraduate and doctoral levels. We have been given the highest ratings by the accrediting agencies like the National Board of Accreditation and University Grants Commission- NAAC and the surveys such as NASSCOM and India Today. However, success of more than 18400 alumni of the University makes us feel more fulfilled. The University shares a special bond with the industries through its unique project semester program. As a result, the industries have happily rewarded our students by offering higher compensation and hiring them in larger numbers.
Research has been a corner stone of the University. Major research projects supported by the European Union, Naval Research Board, Department of Science and Technology, Department of Biotechnology and others are underway. We encourage students to fructify their research through entrepreneurship. For this purpose, Thapar Centre for Industrial Research and Development, Science and Technology Entrepreneurship Park, TIFAC-CORE on Agri-Industrial Biotechnology and L. M. Thapar School of Management have been set up on campus. Our endeavour shall be to offer the students of Thapar University a wholesome, enjoyable and fulfilling experience of learning.
To foster all round development of students we have a large number of cultural, sports, social and scientific activities. We regularly invite the leaders and motivators of all walks of life and encourage the students to share time and space with them. I wish all candidates success and look forward to a great time with them on Thapar Technology Campus.
Kuldeep Kumar Raina
IMPORTANT DATES AND INFORMATION:
The online application form is available on www.thapar.edu. Fill the complete details and then take the print out of the form. Paste a recent passport size photograph on it. Please keep one copy of the printout of completely filled form as it will be required at the time of document checking during counselling. You can pay the the required amount online or attach DD (in favour of Thapar University and payable at Patiala) and send it to “Incharge Admission Cell’ Thapar University, Patiala (Punjab)-147004.
Amount to be deposited
BE/BTech/MBA
For all other programs (per discipline whether in same or different departments/schools)
with print out of application forms taken from website.
1500
2500
IMPORTANT DATES
BE/BTech
LEET/BCA-MCA / MCA/MBA/ MSc/ME/ MTech/ PGDPTT+
FN-NRI candidates
PhD
Last date for receipt of completed application forms.
May 03, 2013

PROSPECTUS 2013-14
 Engineering
 Sciences
 Management
Chairman, Board of Governors
Shri. Sudhir Mohan Trehan
Vice Chairman, Board of Governors
Shri. J. S. Neerav
Director (officiating)
Dr. Kuldeep Kumar Raina
Deputy Director
Dr. Kuldeep Kumar Raina
Deans
Faculty Affairs Dr. R. Siddique Resource Planning & Generation Dr. R.S. Kaler Academic Affairs Dr. S.K. Mohapatra Student Affairs Dr. Seema Bawa Research & Sponsored Projects Dr. P.K. Bajpai
Registrar Dr. D. K. Patnaik
Finance Officer Mr. Pankaj Sinha
Officer on Special Duty Shri Chiranjiv Singh
PREFACE
Thapar University (Formerly Thapar Institute of Engineering & Technology) is a premier educational and research Institute located in the 250-acre lush green campus, known as Thapar Technology Campus (TTC), in the historic city of Patiala. It came into existence in 1956 through an imaginative collaboration between the then State of Patiala and the East Punjab States Union (PEPSU), the Central Government and the Patiala Technical Education Trust (PTET) founded by the great captain of Indian Industry, Late Lala Karam Chand Thapar. The goals of the University are embodied in the Trust Deed inked on April 9, 1956. Thapar University is today recognized among the leading privately managed engineering institutions of the country and the best of its kind in the north-western region of India.
Thapar Polytechnic (TP) College established in 1956, Thapar Centre for Industrial Research and Development (TCIRD) established in 1982, Centre of Relevance and Excellence (CORE) and Science and Technology Entrepreneur’s Park (STEP) established by D.S.T., Government of India are other four institutions that exist on Thapar Technology Campus.
As a fitting recognition of its laudable achievements and its pioneering role in promoting the growth and development both at National and International levels, we were granted full autonomy and the status of a Deemed University in 1985 by the MHRD on the recommendations of the UGC.
From the Director’s Desk
Thapar University has a tryst with excellence. We strive for excellence by ensuring a trinity of superlatives- students, faculty and infrastructure; cohabit in a congenial and conducive environment. Since its inception, the University has remained committed to creation, archiving and dissemination of knowledge in Science, Engineering and Technology for the service to the humanity. We aspire to carry out high quality research in the frontiers of technology as well as develop professionals with sound knowledge and skill, respect for profession, social and national values and ethics.
Our journey of 57 years through the horizon of technical education has culminated in an inclusive expansion into all areas of engineering, science and business management. From a beginning as an engineering college offering degrees Electrical, Mechanical and Civil Engineering Thapar University has grown into a University with eight departments, five schools and eight centres offering degrees at undergraduate, postgraduate and doctoral levels. We have been given the highest ratings by the accrediting agencies like the National Board of Accreditation and University Grants Commission- NAAC and the surveys such as NASSCOM and India Today. However, success of more than 18400 alumni of the University makes us feel more fulfilled. The University shares a special bond with the industries through its unique project semester program. As a result, the industries have happily rewarded our students by offering higher compensation and hiring them in larger numbers.
Research has been a corner stone of the University. Major research projects supported by the European Union, Naval Research Board, Department of Science and Technology, Department of Biotechnology and others are underway. We encourage students to fructify their research through entrepreneurship. For this purpose, Thapar Centre for Industrial Research and Development, Science and Technology Entrepreneurship Park, TIFAC-CORE on Agri-Industrial Biotechnology and L. M. Thapar School of Management have been set up on campus. Our endeavour shall be to offer the students of Thapar University a wholesome, enjoyable and fulfilling experience of learning.
To foster all round development of students we have a large number of cultural, sports, social and scientific activities. We regularly invite the leaders and motivators of all walks of life and encourage the students to share time and space with them. I wish all candidates success and look forward to a great time with them on Thapar Technology Campus.
Kuldeep Kumar Raina
IMPORTANT DATES AND INFORMATION:
The online application form is available on www.thapar.edu. Fill the complete details and then take the print out of the form. Paste a recent passport size photograph on it. Please keep one copy of the printout of completely filled form as it will be required at the time of document checking during counselling. You can pay the the required amount online or attach DD (in favour of Thapar University and payable at Patiala) and send it to “Incharge Admission Cell’ Thapar University, Patiala (Punjab)-147004.
Amount to be deposited
BE/BTech/MBA
For all other programs (per discipline whether in same or different departments/schools)
with print out of application forms taken from website.
1500
2500
IMPORTANT DATES
BE/BTech
LEET/BCA-MCA / MCA/MBA/ MSc/ME/ MTech/ PGDPTT+
FN-NRI candidates
PhD
Last date for receipt of completed application forms.
May 03, 2013

June 10, 2013
June 10, 2013 (for odd semester)
December 2, 2013, (for even semester)
Date of Entrance test to be conducted by TU
JEE(Main)-2013
to be conducted by CBSE on 7.4.2013(off line)
& 8.4.2013 to 25.4.2013 (Online)
JEE(Main)-2013
+Normalized score of 10+2 (60%:40%)
ONLINE Entrance test (June 26 – 30, 2013)
Browse www.thapar.edu for details
June 26 – 30, 2013 (for odd semester-online test)
December 8, 2013
(for even semester-offline test)
Display of result of Entrance Test
July 7, 2013 or as declared by CBSE
July 08,2013
July 8, 2013 (for odd semester)
December 11, 2013, (for even semester)
PhD Admission schedule
Date of interview for PhD:
July 12, 2013(for odd semester)
December 18, 2013(for even semester)
Admission notification and deposit of fee for PhD program:
July 22-26, 2013(for odd semester)
January 6-10, 2014(for even semester)
ME/MTech Admission schedule:
For GATE Qualified candidates:
1
Interview in respective Departments/School
June 18, 2013
2
Deposit of fee
June 18-20, 2013
If selected GATE Qualified candidates fail to deposit the fee by June 20, 2013, the alloted seat shall be cancelled and shall be offered to next candidate in the merit list on June 24, 2013.
Display of number of vacant seats in various disciplines of ME/MTech after offering seats to GATE qualified in above mentioned schedule : July 01, 2013
Counselling including deposit of fee for these vacant seats : July 13, 2013
Last round of counselling for vacant seats if any : July 29, 2013
Note: In all the rounds of counselling, the GATE qualified candidates shall get first preference based on merit. Those who missed the earlier round can attend any counselling held later but their admission will be on merit & subject to availability of seat after offering the seats to all those candidates who have attended the previous rounds (and marked the attendance) & were not offered seat.
MCA /BCA-MCA admission schedule
Counselling including deposit of fee : July 16, 2013
Last round of counselling for vacant seats if any : July 29, 2013
MSc/PGDPTT admission schedule
Counselling including deposit of fee : July 17, 2013
Last round of counselling for vacant seats if any : July 29, 2013
LEET Admission schedule:
Counselling including deposit of fee : July 18, 2013
Last round of counselling for vacant seats if any : July 29, 2013
MBA admission- schedule (Derabassi campus*):
1. Last date for receipt of application forms : June 10, 2013
2. Online entrance examination : June 26-30, 2013
3. Result of entrance test : July 8, 2013
3. GD & interviews of short listed candidates : July 13-14, 2013
4. Display of master merit list (MML) : July 17, 2013
5. Counselling including deposit of fee will be at Thapar : July 20, 2013
University (C-Hall).
6. Last round of counselling for vacant seats if any : July 29, 2013
* The geographical location of 'Derabassi Campus' is at Dera Bassi (Mohali) on the periphery of UT of Chandigarh.
BE/BTech Admission schedule (July Admissions):
(i) Board toppers of 2013 : July 15, 2013
(ii) For others:
Round#1
Counselling including deposit of fee:
July 19, 2013
Reserved categories other than Sports : 9.00 AM
Sports category : 4.00 PM
July 20, 2013
General category (upto All India Rank 5000) : 9.00 AM
General category (AIR 5001-15000) : 10.00 AM & onwards
July 21, 2013
General category (AIR 15001-30000) : 9.00 AM & onwards
Round#2
Counselling including deposit of fee for the vacant seats:
August 3, 2013
Reserved categories including Sports : 9.00 AM -11.00 AM
General category (upto AIR15000) : 11.00 AM
General category (upto 15001-30000) : 3.00 PM
August 4, 2013
General category (AIR 30001 rank & onwards) : 9.00 AM
Round#3
Final counselling including deposit of fee for the vacant seats:
August 13, 2013 :
Reserved categories including Sports : 9.00 AM -9.30 AM
General category : 9.30 AM onwards
BE/BTech Admission schedule (December Admissions):
Availability of the forms October 1, 2013
Last date of receipt of application forms December 2, 2013
Declaration of the merit list December 10, 2013
Counseling for admission & deposit of fee December 17, 2013
Commencement of classes January 6, 2014
Venue for counseling of all the above programs (except MBA) : University Auditorium
Venue for counseling for MBA : C-Hall, Thapar University
Note: No separate letter for counselling shall be issued.
Documents required at the time of counselling:
Candidates must bring with them following original certificates and a set of attested copies of all the certificates at the dates specified hereunder for various programmes.
 Copy of the Application form
 10+2 /diploma/graduation/post graduation DMC
 Matriculation/Higher Secondary Certificate showing Date of Birth
 Result Card of Entrance Exam
 Admit Card of Entrance Exam
 GATE score card for ME/MTech admissions
 Character Certificate
 Medical Fitness Certificate
 Reserved Category Certificate on the prescribed proforma and signed from the competent authority (if applicable)
 Affidavit required in case of discontinuity of studies
 Undertaking by candidates not having result of qualifying exam as per prescribed format in case of ME/MTech admissions.
 Migration Certificate
 Income Certificate
 Experience certificate & No objection certificate from employer. (For PhD candidates)
 Check list proforma
Commencement of session (except BE/BTech first year): July 22, 2013
Commencement of session for first year of BE/BTech: July 29, 2013
FOR ANY OTHER DETAILS INCLUDING ELIGIBILITY CRITERIA, FEE ETC
CONTACT (0 8288008120, 0 82 88008121 )
Email: admissions@thapar.edu
Website: www.thapar.edu
IMPORTANT NOTE: Candidates are advised to regularly browse www.thapar.edu for information/instructions regarding admissions. No separate letters shall be sent.
All applications must be sent to “Incharge Admission Cell’ Thapar University, Patiala (Punjab)-147004.
HOW TO APPLY
1 Candidates seeking admission in TU shall fill up the online form available on our website www.thapar.edu. Kindly fill the complete details and then take two print outs of the form and paste a recent passport size colored photograph.
Application fee paid Online: Send one of the printouts of form.
Application fee paid through DD: Send one of the printouts by attaching the required amount of DD (in favour of Thapar University and payable at Patiala).
Retain second copy of the printout of the form to be produced at the time of document checking of original documents during counseling.
Important Note: A candidate cannot claim admission merely by filling the application form and paying the application fee. If he/she fulfils the eligibility criteria as per the prospectus, only then he/she shall be considered for admission during counseling. So, candidates are advised to read eligibility and other conditions before filling the form.
2 The original certificates and set of attested copies of the certificates are required to be produced at the time of document checking.
3 Every candidate must indicate in his/her application the category of seat for which he/she wants to apply. A copy of the certificate of the reserved category (if applicable) shall be attached.
4 Application completed in all respects should reach the INCHARGE ADMISSION CELL, THAPAR UNIVERSITY, PATIALA -147004, on or before the last prescribed date of the respective programmes.
5 Incomplete application in any manner and received after the due date/time will be rejected. The University does not take any responsibility for postal delay or loss in transit of the application form, demand draft, withdrawal form or any other communication in this regard.
6 The specimens of the format of the required certificates are available on our website for the guidance of candidates. Each certificate must be submitted on the prescribed format and must be issued by the competent authority as mentioned, under proper seal/stamp of their office on a date prior to or on the last date for submission of application form.
7 PENALTY FOR WRONG INFORMATION/SUPPRESSION OF INFORMATION.
If at any stage it is found that a candidate has concealed, suppressed or distorted any informaton/fact, in the application form, his/her admission to the University, if granted, shall stand cancelled. He/she will have no claim, whatsoever, against the University.
8 The provisions of Prospectus 2013-14 may be changed by the competent authority without any notice.
9 In case of any dispute, the decision of the Director, TU, Patiala shall be final and binding on the candidates.
10 For BE/BTech (on the basis of JEE (Main)-2013)
Candidates due to appear in the qualifying examination are also eligible to apply. Such candidates will be placed provisionally in the merit list. They will not be considered for admission if they fail to submit proof of passing the qualifying examination at the time of counselling.
For candidates other than BE/BTech
Candidates who are appearing in the final exam of the qualifying degree/diploma(for LEET) are eligible to apply. Such candidates have to furnish following undertaking at the time of counselling.
“I am applying on my own risk and responsibility as my final result of the Qualifying exam has not been declared.
I do hereby declare that I do not have any backlog paper in any of the previous semesters (Years) of study of the qualifying exam and also I do not expect any backlog in my final exam.
I assure you that I will produce the proof of passing of my Qualifying examination with the minimum percentage of marks required on or before December 31, 2013, failing which my admission shall stand cancelled and I shall not claim any right on any count whatsoever.”
11 Candidates applying for more than one discipline (whether in same or other department) of ME/MTech/MSc/PhD programmes are required to fill separate application form for each discipline.
INSTRUCTIONS FOR ONLINE ENTRANCE TEST
1 Entrance test of all programmes other than BE/BTech shall be conducted ONLINE.
2 Candidates will be able to generate ‘Admit Card’ from April 16-June 17, 2013 provided their DD alongwith print out of application form reaches Thapar University in time. The login id and password created by candidate at the time of filling the application form shall be used to register for generation of Admit card.
Note: The Admit card shall be issued provisionally to the candidate subject to his/her satisfying the eligibility condition.
3 After registering, the candidate shall take out two print outs of ‘Admit Card”, paste latest photograph on each and then come to the entrance test centre. Alongwith admit cards, the candidate will also carry any one of the identity proof (Original) with him/her like Passport/Voter I Card/ PAN Card/ Driving License. One copy of the admit card shall be retained by the entrance test centre. The candidate shall keep the other copy (duly acknowledged by the examiner at test centre) to be shown at the time of document checking.
4 The entrance test shall contain objective type questions. Other details are as under:
SNo
Name of the programme
Duration of Entrance Test
Number of questions in the entrance test
1
MCA
3 hours
150
2
LEET
3 hours
150
3
BCA-MCA, MSc , ME/MTech, PGDIIT, MBA, PhD
(for each programme/test)
1.5 hours
75
For admission in the second semester of session 2013-14
SNo
Name of the programme
Duration of Entrance Test
Number of questions in the entrance test
1
PhD
1.5 hours
75
5 While registering for ONLINE entrance test on our website, the candidate shall choose entrance test centre of his/her choice from the available list and any one slot available in the test period given above i.e. (June 26 – 30, 2013). Once slot is chosen, it cannot be changed thereafter.
6 Thapar University shall also send ‘login id’ & ‘password’ by email at the email address given in the application form.
7 Filling of valid mobile number is mandatory.
Instructions for BE/BTech counselling
1 Personal presence during counselling/admission is essential for all eligible candidates seeking admission.
2 A candidate desirous of seeking admission against the available seats will bring the original certificates on the scheduled date of counselling/admission.
3 The allotment of discipline at the time of counseling/admission will be made on the basis of the seats available in a particular discipline and category at that instant of time, the order of preference for various disciplines given by the candidate, and his/her merit according to normalized JEE (Main) rank. The candidates appearing for the counselling shall have the option of either retaining the preference order given during the first counselling or can submit fresh preference order in the subsequent counselling(s).
4 Candidate who either does not seek admission on a particular date as per counselling/ Admission Schedule or fails to attend the counselling or has been admitted in the previous counsellings will also be eligible for admission on the subsequent round(s) of admission as per Counselling/Admission Schedule. However, the allotment of discipline to such a candidate will be made subject to the availability of seat(s) in a particular discipline at that instant of time, the order of preference for various disciplines given by the candidate and his/her merit according to normalized JEE (Main) rank. The previously admitted students while appearing in subsequent rounds of counselling(s) for branch upgradation shall not be required to deposit any extra fee.
5 A candidate who reports late for admission during counselling will not be eligible for the discipline according to his/her original merit position but will be offered a seat in the discipline where the seats are available at that instant of time/day.
6 If a candidate is offered admission and he/she does not deposit the prescribed fees and original certificate immediately after selection, the offer so made shall be treated as cancelled and the seat will be offered to the candidate next in order of merit. No correspondence or appeal in this regard will be entertained.
7 In case of any seat(s) falling vacant during the first or subsequent counsellings, the seat(s) so vacated will be filled up during the second or subsequent counsellings till the Final counselling only
8 No seat shall be filled after the final counselling is over.
Instructions for counseling for programs other than BE/BTech
Admission shall be made on the basis of the merit of prescribed Entrance Test of respective programmes and fulfillment of other conditions as per procedure detailed in the Prospectus.
General Instructions:
1 In case of a tie among candidates securing equal marks in the merit list, the same will be broken in accordance with the following criteria:
(a) Candidate senior in age shall rank higher in order of merit.
(b) In the case of a tie in age also, a candidate getting higher percentage of marks in the qualifying examination shall be ranked higher in order of merit.
(c) In the case of a tie in percentage of marks in the qualifying examination also, a candidate securing higher percentage of marks in matriculation/secondary or equivalent examination shall rank higher in order of merit.
2 Withdrawal of Seat / Refund of fee:
Candidate wishes to withdraw the seat, must submit the application to IN-CHARGE, ADMISSION CELL, Thapar University. The fee will be refunded after adjusting all the outstanding dues, if any.
Date of Receipt of Application
Amount to be refunded
(i)
One day before the final counseling or before the start of the session
:
After deducting Rs. 1000/- of the total fee deposited.
(ii)
From the date of final counselling and up to September 30, 2013
:
50% Tuition Fee + 50% Development Fee + University Security and Alumni Fee + 50% of all Hostel dues (if applicable)
(iii)
After September 30, 2013
:
University Security + Alumni Fee
3 Seats, if any in the reserve categories remained unfilled, such vacant seats shall be filled by General category candidates on the basis of merit.
4 Candidates from physically handicapped category are required to produce the Medical Certificate from the Chief Medical Officer of the District concerned, which should indicate the extent of permanent disability in support of their claim. Minimum 40% permanent disability is required to be eligible under this category. Further, the above provisions will be subject to the decision of the Admission Committee of the University whether such a candidate would be able to
pursue the studies at the University with the specific disability. The decision of the Admission Committee in this regard shall be final.
5 No separate letters for counseling/document checking/deposit of fee shall be issued for any programme.
6 Admitted candidates will have to submit the migration certificate from the earlier University/Board within a month of their admission.
7 Electronic gadgets such as Mobile Phones, Pagers, etc. are not permitted in the Examination Centre.
8 The statements made in this Prospectus and all other information, contained herein are believed to be correct at the time of publication. However, the University reserves the right to make at any time, without notice, changes in and/or additions to the regulations of University and conditions governing the conduct of students, requirements for degree, fee and any other information, or statements contained in this Prospectus either on its own or under any rules or regulations imposed by UGC/MHRD. No responsibility will be accepted by the University for hardship or expense encountered by its students or any other person for such changes, additions, omissions or errors, no matter how they are caused.
9 All disputes will be subject to jurisdiction of the Civil Courts, Consumer redressal Forum at Patiala and for writs the Punjab & Haryana High Court at Chandigarh only.
10 The students of all the regular programmes are not allowed to join any job till they complete all the requirements for the award of degree. Only part-time students are allowed to join job.
11 In case,
a selected candidate submits false information about fee, eligibility, rank of entrance test
or
a candidate who is not offered any seat but deposits the full fee
then seat allotted to him/her shall stand cancelled.
12 Candidates must be medically fit and must bring along with them a medical fitness certificate signed by a Gazetted Medical Officer at the time of admission on the prescribed proforma as per Annexure-IV.
13 MODES OF PAYMENT OF APPLICATION FEE AND OTHER DUES:
Application fee: In the form of DD or through online payment.
Total fee: Either in cash or through Demand Draft.
In the form of Demand Draft (DD), the DD of requisite amount should be made in favour of Thapar University, Patiala and payable at Patiala. The DD must reach the University on or before the prescribed date otherwise the candidature shall be cancelled.
BRIEF INTRODUCTION
ACADEMIC PROGRAMMES OF THE UNIVERSITY
The University offers academic programmes at the undergraduate level leading to BE/BTech degree, at the postgraduate level leading to MCA, MSc, MBA, ME/MTech degrees, Dual degree program BCA-MCA and at the doctoral level, PhD and DSc degrees.
The salient features of the programmes are semester-wise credit system (trimester for MBA), letter grades, continuous evaluation of the students’ performance, course-wise promotion and the flexibility to allow the students to select courses and move at an optimum pace suited to their ability, capacity and interest.
Thapar University is accredited with ‘A’ grade by National Assessment and Accreditation Council (NAAC), UGC.
ACADEMIC UNITS
The academic units of the University are Departments, Schools and Centres. Role of the Departments is to organise and conduct undergraduate, postgraduate, and doctoral programmes in relevant engineering/technological disciplines, while the Schools cater
for only postgraduate and doctoral programmes. The Centres are special inter-disciplinary units serving the university as a whole.
A. DEPARTMENTS
(i) Bio-Technology & Environmental Sciences
(ii) Chemical Engineering
(iii) Civil Engineering
(iv) Computer Science & Engineering
(v) Electrical & Instrumentation Engineering
(vi) Electronics & Communication Engineering
(vii) Mechanical Engineering
(viii) Continuing and Distance Education
B. SCHOOLS
(i) Chemistry & Bio-Chemistry
(ii) Behavioral Science and Business Studies
(iii) Mathematics & Computer Applications
(iv) Physics & Material Science
(v) L M Thapar School of Management
(vi) School of Energy and Environment Sciences
C. CENTRES
(i) Central Library
(ii) Central Workshop
(ii) Centre for Industrial Liaison and Placement (CILP)
(iv) Centre of Relevance and Excellence (CORE) in Agro and Industrial Biotechnology.
(v) Centre for Information Technology and Management (CITM)
(vi) Health Centre
Medium of Instruction – English
FACULTY
TU has well qualified, highly motivated and fully committed faculty in its all Departments, Schools and Centres to impart quality education at UG & PG levels. Most of the faculty members are either PhD or pursuing the work for their PhD.
The Board of Governors of TU created the position of Dean of Faculty Affairs in the University in 2006. The Dean of Faculty Affairs has to look into the needs of faculty in the University and upgradation of qualifications and skills, help the departments to develop their road map and monitoring its implementation, faculty recruitment & induction and faculty welfare etc.
MOU WITH FOREIGN UNIVERSITIES
TU has signed MoU with the University of Waterloo, Canada to work together for training of students and to carry out joint research activities. We have entered into MoUs with other foreign Universities including University of Western Ontario, New Jersey Institute of Technology, University of Florida, Kumamoto University Japan, Santa Clara University (CA), Virginia Polytechnic Institute, Universidade de Aveiro (UA), Rose Bruford College, London & Trinity College Dublin etc. TU has also signed MoUs with leading industries like Cranes Software International Ltd., ICICI Bank, Wipro, Crompton Greaves Ltd., M/s Secure-Net Technologies and CSIO Chandigarh for collaborative research programs.
ALUMNI UPDATE
Alumni of a University are its greatest assets. Whether one has graduated a year ago or entered the portals of this great University more than 50 years ago, each one of the Thaparian possesses something of incredible value to the University. Many of our alumni are highly placed in India and abroad. From being on the boards of multi-nationals to serving in the Indian Civil Services, Thaparians have always made their alma mater proud.
TU Alumni Relations Office acts as a liaison between the University and its alumnus and also maintains the website of TU Alumni association (www.thaparians.in). The Thaparian website provides a platform to alumni to interact and to keep themselves abreast of the latest developments on campus.
FINISHING SCHOOL
With a view to bridge the gap between the students aspiring for a career and the corporate world offering huge employment opportunities, TU offers the concept of ‘Finishing school’ for the students, wherein the students get to learn Communication-cum-interview skills as well as the French language.
ORGANIZATIONS VISITING FOR CAMPUS RECRUITMENT
1
Thorogood Associates (I) Pvt. Ltd.
56
Gammon India Ltd.
111
MIT Modinagar institute of Technology
2
Goldman Saches Service (P) Ltd.
57
Sapient Nitro Ltd.
112
WAPCOS LTD
3
D.E. Shaw (I) Software (P) Ltd.
58
Ericsson India Pvt.Ltd.
113
Max Technologies
4
GrapeCity India Pvt Ltd
59
Pratap University
114
Shivalik College of Engineering
5
Make My Trip.com
60
Simon India Ltd.
115
Infomaths
6
Tata Motors Limited
61
Alcatel Lucent India
116
Hatch
7
Mahindra & Mahindra Ltd.
62
ACC Ltd.
117
Hindusthan National Glass and industries Ltd.
8
Samsung India Soft. Engg Lab.
63
Nestle India Ltd.
118
Punj Lloyd Consulting Ltd.
9
ZS Associates India Pvt Ltd
64
Infogain India Pvt.Ltd.
119
Bharat Electronics Ltd.
10
Areva T & D India Ltd.
65
GMR Group
120
Computer Sciences Coorporation
11
Winshuttle India Ltd.
66
ST Ericsson (I) Pvt.Ltd.
121
IOL Chemicals & Pharmaceuticals Ltd.
12
Future First Info Service (P) Ltd.
67
CoCubes.Com
122
H.P. India
13
John Deere India Pvt Ltd.
68
Paxcel Technologies. Pvt. Ltd.
123
Panacea Biotech. Ltd.
14
Honda Motorcycle and Scooter India Pvt. Ltd.
69
Cadence Design Systems (I) Pvt. Ltd.
124
ST Micro Electronics Ltd.
15
Edifecs Technologies Pvt Ltd
70
National Engineering Industries Ltd.
125
Comviva Technologies
16
American Express
71
Beroe Consulting (I) Pvt. Ltd.
126
ABC Ltd.
17
The Smart Cube
72
Magneti Marelli India
127
Triniti Centre
18
Talwar & Talwar Consultants
73
Tata Power Ltd.
128
Johnson Mathhey India Ltd.
19
Hero Motocorp Ltd.
74
Capital IQ India
129
Saint Gobain India
20
Shapoorji Pallonji & Co. Ltd.
75
Idea Cellular Ltd.
130
Afcons Infrastructures Ltd.
21
UOP India Pvt. Ltd.
76
Simplex Infrastructues Ltd.
131
Ambuja Cement India
22
Informatica Business Solutions Pvt. Ltd.
77
Kritikal Solutions Pvt. Ltd.
132
SCOMI Group
23
Maruti Suzuki (I) Ltd.
78
Century Link India
133
Garg Associates
24
Tally Solutions Pvt. Ltd.
79
Sagacious research
134
Pure Testing Ltd.
25
Royal Bank of Scotland
80
Bharti Infratel Ltd.
135
Stellarix Consultancy
26
EXL Service India ltd.
81
Ansal API Ltd.
136
Four Soft Ltd.
27
Reliance Industries Ltd.
82
Mewar University
137
Glaxo Smith Kline Beecham Ltd.
28
Thought Works Technologies India
83
Samsung India Soft. Operations. Pvt. Ltd.
138
Adobe Systesm
29
India Bulls Power Ltd.
84
GATI India
139
Wrigley India
30
Taxes Instruments India Pvt Ltd
85
LNJ Bhilwara Ltd.
140
Siemens Ltd.
31
Juniper Netwroks India Pvt Ltd
86
Marwadi Education Foundation
141
Oriental Carbon & Chemicals Ltd.
32
Amazon India Development Centre
87
Sonalika Tractors
142
Libsys Corporation
33
Deloitte Consulting India Pvt Ltd
88
Halcrow Consulting India
143
DHC Consulting Ltd.
34
Indus Vally Partners
89
L & T Ramball Ltd.
144
AKS Software Ltd.
35
GS Engineering & Const. India Pvt. Ltd.
90
IBM India
145
AVTEC Ltd.
36
Punj Lloyd Ltd.
91
KPMG India
146
TVS Motors Ltd.
37
Microsoft India
92
Bharti Air Tel Ltd.
147
Sunsource Energy ltd.
38
Zscaler Inc
93
Mani Karan Power Ltd.
148
Sgurr Energy India
39
Ace Though Technologies
94
HCL Comnet Ltd.
149
Oxylane Group
40
Amdocs Development Centre India
95
Avantha Power Ltd.
150
Aayan Infra-Tel
41
Larsen & Tourbo Ltd.-ECC Division
96
Sharda University
151
Brain Edge India
42
Tata Consultancy Services
97
Brahmos Aerospace Ltd.
152
SGS India
43
Trident Group
98
Gates India
153
Vintech Consultants
44
HCL Technologies
99
Amtek Group
154
Usha International
45
Headstrong Services India
100
Kayaka Infotech
155
HCL Infosystems Ltd.
46
Nagarro Software
101
Engineers India Ltd.
156
Tata Chemicals
47
Nomura Services
102
Lovely Professional University
157
Jay Pee Cement
48
Wipro Technologies
103
Jovian Data Infotech Ltd.
158
Rays Power Infra (P) Ltd.
49
MU Sigma Business Solutions
104
Aakash Institute
159
Krishna Engg. Works
50
Samsung Engineering India Pvt. Ltd.
105
Motherson Sumi Infotech & Design Ltd.
160
Petrofac Consulting
51
Oracle Corporation
106
Escorts Auto Products Ltd.
161
Tata Advanced Systems
52
Aricent Technologies Ltd
107
Emergent ventures Ltd.
162
Max India Ltd.
53
ISGEC
108
Triune Engineer Services Pvt. Ltd.
163
Unimark Remedies Ltd.
54
Anand Group
109
Baba Farid Group of Institutions
164
Incise Infotech.
55
Honda Siel Cars India Ltd.
110
Lakshya Forum for Competitions Pvt. Ltd.
3. ADMISSION TO THE FIRST YEAR OF BE/BTECH PROGRAMME
3.1 ELIGIBILITY:
A candidate shall be eligible for admission in the UG programmes subject to the
following conditions:
The candidate
SECTORWISE PLACEMENT
TELECOM
7%
PROCESS
41%
REAL ESTATE/
CONSTRUCTION
11%
MARKETING
2%
EDUCATION
7%
MISCELLANEOUS
3%
AUTOMOBILE
3%
INFORMATION TECHNOLOGY
26%
(i) has passed 10+2 or equivalent examination with at least 60% marks (55% for SC/ST candidates) in aggregate of three subjects, namely, Physics, Mathematics and any one subject out of Chemistry, Biology, Biotechnology and Computer Science.
(ii) has appeared in JEE (Main)-2013.
(iii) possesses a good moral character.
(iv) is a citizen of India.
(v) is born on or after October 1, 1988 (5 years relaxation in age for
SC/ST/PH candidates).
The admission shall be made on the basis of merit of score in JEE (Main)-2013 and normalised score in Class 12th or other qualifying exam as declared by CBSE (60% & 40% weightage respectively).
The top two toppers of the recognized Boards of India in the exams held in 2013, shall be given direct admission to the first year of UG program i.e the entrance test score of such students shall not be required for admission. They shall be allocated branch of their choice. Such candidates shall have to furnish proof of being toppers from their respective boards. Tuition fee shall also be waived off for such students provided they maintain minimum CGPA of 8.50 in subsequent semesters.
3.2 NUMBER OF SEATS
TU offers UG programmes in the following disciplines. Total number of seats is 975 and their discipline-wise distribution is as under:
Programme
Number of Seats
BTech Programme (4 year Programme)
Biotechnology
30
BE Programme (4 year Programme)
Chemical Engineering
75
Civil Engineering
90
Computer Engineering
180
Electrical Engineering
120
Electronics & Communication Engineering
180
Electronics (Instrumentation & Control) Engineering
120
Mechanical Engineering
120
Mechatronics
30
BE[IE]-MBA (5 year Programme)
Industrial Engineering*(BE[IE]-MBA)
30
TOTAL
975
*The candidates will be awarded two degrees (BE & MBA) on the successful completion of their five year programme.
These students shall commence their curriculum in Patiala Campus for BE(Industrial Engineering) and after 3 years shall move to Derabassi
Campus for the MBA component. LMTSOM shall make the arrangements to do the laboratory components of BE (Industrial Engineering) at Patiala campus/Derabassi campus for these students during the 4th or 5th year. The geographical location of 'Derabassi Campus' is at Dera Bassi (Mohali) on the periphery of UT of Chandigarh.
3.2.1 Punjab State Seats: 50% of the seats, i.e., 488 are reserved for candidates who have passed qualifying examination from School/College/Institute located in the state of Punjab.
The Children of employees of Punjab Govt. posted/deputed outside Punjab will be eligible for admission against these seats irrespective of the location of School/College from where they pass their qualifying examination provided further that these candidates should have passed their qualifying examination (10+2) or its equivalent during such posting/deputation of the parent(s) outside Punjab. Candidates seeking admission under this category are required to submit a certificate as per format (Annexure-X) alongwith the application form.
3.2.1.1 Seats for Sports Persons from Punjab:
2% seats (10) are reserved for outstanding sports persons possessing sports gradation certificates A, B or C issued by the Director of Sports, Punjab. Candidates in the following sports disciplines will only be considered for admission for these seats.
i) Athletics
ii) Basketball
iii) Cricket
iv) Hockey
v) Lawn Tennis
vi) Football
vii) Swimming
viii) Volleyball
ix) Badminton
x) Handball
xi) Table Tennis
xii) Kabaddi
xiii) Weight Lifting, Power Lifting & Best Physique
An attested copy of the sports gradation certificate and other relevant sports participation certificates must be attached along with the application form.
Further, the following conditions will apply for seeking admission under Sports category:
(i) Only the above mentioned games/disciplines will be considered for admission as TU participates & holds Inter-University/Inter-Engineering Tournaments in these games.
(ii) The Constitution of sports committee for the purpose of making sports merit is as under:
 Chairman of Admission Committee - Chairman
 One representative of Department of Sports, Punjab - Member
 President Sports, TU - Member
 Director Physical Education, TU - Member
 Registrar, TU - Member
The Committee will prepare Sports merit as per the criteria laid down by the Director, Department of Sports, Punjab.
(iii) Admission will be made by the duly constituted Admission Committee of the University on the basis of sports merit prepared by the sports committee duly constituted by the Director of the University.
3.2.2 Outside Punjab State Seats: 50% of the seats, i.e., 487 are reserved for candidates who have passed qualifying examination from School/College/Institute located outside the state of Punjab.
3.3 OVER AND ABOVE SEATS:
(a) Punjab Government Seats: 2% seats (20) are reserved for the candidates nominated by Punjab Government. These seats shall be filled up subject to the policy of the Punjab Government regarding nominations amended from time to time. The candidates for these seats are required to appear in the entrance test as specified by Punjab Government. The candidates for this category should contact the office of Director, Technical Education & Industrial Training (Government of Punjab), Plot No 1, Sector 36-A, Chandigarh.
(b) Seats reserved for beneficiary States: MHRD, GOI, is having a continuous cheme of reservation of seats in Engineering/ Technology/ Architecture/Pharmacy courses conducted at degree and diploma level technical institutions approved by AICTE, for states and UTs which do not have Engineering colleges, Polytechnics or lack facilities for education in specific fields of technical education and for certain categories including foreign students.
The nomination of the students is made by the State Governments concerned on the basis of their own criteria like entrance test etc. MHRD has no discretionary powers to nominate any students to any specific course or college and the actual admission of the student.
Ten (10) seats (One in each discipline) are reserved under this scheme of reservation of seats of MHRD, GOI.
(c) Jammu & Kashmir Migrants
One seat is reserved for the Jammu & Kashmir Migrants. The admission & discipline of seat under this category will be decided by the Director, Technical Education Punjab.
Candidates desirous of seeking admission as Kashmiri Migrants may contact the office of Director Technical Education & Industrial Training (Government of Punjab), Plot No 1, Sector 36-A, Chandigarh.
Note: Candidates nominated under the categories at S. No. 3.3(a), 3.3(b) and 3.3 (c) must register prior to the last date of registration as mentioned in the Academic Calendar. No late applications shall be entertained. Branch mentioned in the nomination must conform to one of the existing branches as per Table – II of the University; else the nomination shall be void. In case
University receives multiple nominations for any branch, only the first received nomination shall be accepted for that branch.
3.4 CHILDREN OF THAPAR UNIVERSITY EMPLOYEES: 1% over and above seats are reserved for children of employees of Thapar University. The candidates seeking admission under this category are required to satisfy the eligibility mentioned at 3.1.
3.5 SEATS UNDER DIFFERENT CATEGORIES: Table-II contains the number of seats under various categories in different disciplines of the UG programmes.
Table - II
SEATS UNDER DIFFERENT CATEGORIES FOR EACH DISCIPLINE
Category
Discipline
%age
CH
CE
EC
EE
EI
ME
IE-MBA
MT
CT
BT
Total
1.
Reserved Seats
(a)
Scheduled Castes/Tribes
i) From Punjab
25
9
11
22
15
15
15
4
4
23
4
122
ii) Outside Punjab
SC
17.5
6
8
15
11
11
11
3
2
15
3
85
ST
7.5
2
3
7
5
5
5
1
1
7
1
37
(b)
Backward Classes from Punjab
5
2
2
4
3
3
3
1
1
4
1
24
(c)
Sports Persons from Punjab
2
1
1
1
1
1
1
1
1
1
1
10
(d)
Physically handicapped persons
i) From Punjab
3
1
1
3
1
1
2
1
1
3
1
15
ii) Outside Punjab
3
1
1
3
1
1
2
1
1
3
1
15
2.
Open Merit Seats
(a)
From Punjab
24
30
60
40
40
39
8
8
59
8
316
(b)
Outside Punjab
29
33
65
43
43
42
10
11
65
10
351
Total
75
90
180
120
120
120
30
30
180
30
975
3.
Nomination Seats
i) Punjab Govt.*
2%
2
2
3
2
2
3
1
1
3
1
20
ii) Govt. of India*
1
1
1
1
1
1
1
1
1
1
10
iii) J & K Migrants*
1**
4
FN/NRI seats* #
15%
11
11
27
11
11
17
4
5
17
6
120
5
Children of TU employees
1
1
1
1
1
1
1
1
1
1
1
10##
Abbreviations used in Table-II:
BT: Biotechnology, CH: Chemical Engineering, CE: Civil Engineering, CT: Computer Engineering, EC: Electronics and Communication Engg, EE: Electrical Engg, EI: Electronics (Inst & Ctrl) Engg, ME: Mechanical Engg, MT: Mechatronics,IE-MBA: Industrial Engg- MBA (5 year programme).
* THESE ARE OVER AND ABOVE SEATS.
# Please refer to Section 13.0 for eligibility and other conditions.
** Discipline will be allocated by the nominating agency.
## Not more than one seat in each discipline shall be allocated.
4.0 ADMISSION TO FIRST YEAR (SECOND) SEMESTER OF UG PROGRAME FOR THE
SESSION 2013-14:
The University, if deems fit, may admit students to the second semester of UG programme in January 2014 subject to vacancies that may exist in the first semester of first year. The students admitted in this category shall have to clear all the courses as per the scheme of the discipline of Thapar University, in which she/he is admitted. Students shall have to schedule their remaining courses in the subsequent summer semesters and regular semesters with the permission of DoAA.
The eligibility & schedule of the admission will be as under:
Eligibility:
1 She/he should be a student of BE/BTech programme of a recognised
Institute/University and have passed 10+2 or equivalent examination from recognized board and have secured at least 60% (55% for SC/ST candidates) marks in aggregate of Mathematics, Physics and Chemistry/Computer science/Biology/Biotechnology.
2 She/he should have appeared in the JEE (Main)-2013.
3 She/he should be a citizen of India.
4 She/he should bear a good character and satisfy the prescribed requirements of the University.
The admission shall be made on the basis of merit of score in JEE (Main)-2013 and normalised score in Class 12th or other qualifying exam as declared by CBSE (60% & 40% weightage respectively).
Schedule of the admissions:
Availability of the forms October 1, 2013
Last date of receipt of application forms December 2, 2013
Declaration of the merit list December 10, 2013
Counseling for admission & deposit of fee December 17, 2013
Commencement of classes January 6, 2014
Venue for counselling: Thapar University, Patiala.
Note: No separate letter for Counselling shall be issued.
Admission Procedure:
 Only those candidates shall be considered who shall apply on the prescribed application form on or before the last date.
 Admission shall be made on the merit of the normalized score(60%-40%) of JEE (Main)-2013 as declared by CBSE in July 2013.
 Candidate is required to pay tuition fee and other dues at the time of admission.
 There will be only one counselling.
 Candidate leaving after taking admission shall be refunded Caution Money and alumni fee only.
 The number of seats available for admission shall be available on our website www.thapar.edu w.e.f. October 15, 2013. 15% seats shall be reserved for SC, 7.5% seats for ST category and 3% for physically handicapped category. In case, any seat in reserved category remains vacant, the same shall be converted to the General Category.
 Candidate should bring all the documents in original at the time of Counselling.
 In case, a student of first year of Thapar University gets a seat under this scheme then the seat vacated by such candidate shall be offered to other candidates in the merit list.
5. LATERAL ENTRY ADMISSION TO THE SECOND YEAR OF UG PROGRAMME
5.1 ELIGIBILITY:
A candidate shall be eligible for admission in the BE/BTech programmes subject to the following conditions:
The candidate
(i) has passed
(a) diploma, in relevant* discipline, of minimum 3 years duration after matriculation
OR
(b) diploma, in relevant* discipline, of minimum 2 years duration after 10+2 from Polytechnic College/Institute affiliated with State Board of Technical Education/University, or recognized by UGC/AICTE with a minimum of 60% marks ( 55% for SC/ST) in aggregate or equivalent grade point.
OR
(c) BSc(NonMedical) from recognized University with
60% ( 55% for SC/ST) marks in aggregate
(ii) has qualified LEET-TU with at least 20% aggregate marks (15% for SC/ST candidates).
(iii) possesses a good moral character.
(iv) is a citizen of India.
*The various UG programmes and their relevant diploma disciplines are given as below:
S. No.
Name of Programme
Relevant Disciplines of Diploma
1.
(a) Chemical Engineering
(b) Biotechnology
Chemical Technology/ Chemical Engineering/ Food Technology/Biotechnology
2.
Civil Engineering
Civil Engineering/ Architectural Assistantship
3.
Computer Engineering
Computer Engineering/ Computer Programming &Application/ Computer Servicing & Maintenance/Information Technology
4.
Electrical Engineering
Electrical Engg.
5.
(a) Electronics & Communication Engineering
(b) Electronics ( Instrumentation & Control) Engineering
Electronics & Communication/ Electronics & TV Techonology/ Electronics & Microprocessors/Electronics & Computer Engineering/Instrumentation and control Engineering/Instrumentation & Process Control Engineering.
6.
(a) Mechanical Engineering
(b) Industrial Engineering*(BE[IE]-
MBA)
(c) Mechatronics
Mechanical Engineering/Production & Industrial Engineering/ Refrigeration & Air Conditioning/ Foundry Technology / Industrial/Production Engineering / Maintenance of Plant & Machinery / Welding Technology/ Tool and Die/ Automobile.
5.2 NUMBER OF SEATS
Lateral entry admission to the BE/BTech programme for diploma holders & BSc (Non Medical) at the 2nd year (3rd Semester) level will be made through Lateral Entry Engineering Test to be conducted by the University (LEET-TU) for the following seats in various categories:
Category
General
SC
(15%)
ST
(7.5%)
PH
( 3%)
Grand Total
Diploma
BSc
Diploma
BSc
Diploma
BSc
Diploma
BSc
Diploma
BSc
Biotechnology
3
3
0
1
0
1
0
0
3
5
Chemical Engineering
6
6
1
1
0
1
0
0
7
8
Civil Engineering
6
6
1
1
1
0
0
0
8
7
Computer Engineering
11
12
3
3
2
2
1
0
17
17
Electrical Engineering
6
6
1
1
1
0
0
0
8
7
Electronics & Communication Engineering
13
13
3
2
1
2
1
1
18
18
Electronics (Instrumentation & Control) Engineering
6
6
1
1
1
0
0
0
8
7
Mechanical Engineering
8
8
2
1
0
1
1
1
11
11
Mechatronics
3
2
0
1
0
0
0
0
3
3
Industrial Engineering*
(BE[IE]-MBA)
2
2
1
1
0
0
0
0
3
3
TOTAL
64
64
13
13
6
7
3
2
86
86
*The duration of the programme for students admitted in the 2nd year of BE(Industrial Engineering) will be four years and they will be awarded two degrees(BE & MBA) at the successful completion of their four year programme.
These students shall commence their curriculum in Patiala Campus for BE(Industrial Engineering) and after 2 years shall move to Derabassi Campus for the MBA component. LMTSOM shall make the arrangements to do the laboratory components of BE (Industrial Engineering) at Patiala campus/ Derabassi campus for these students during the 4th or 5th year. The geographical location of 'Derabassi Campus' is at Dera Bassi (Mohali) on the periphery of UT of Chandigarh.
In addition to above seats, 1% over and above seats are reserved for children of employees of Thapar University. The candidates seeking admission under this category are required to satisfy the eligibility as mentioned above at 5.1.
Seats of reserved categories, if remained unfilled, shall be converted to General category.
In case of seat(s) meant for Diploma holders remaining vacant, the seat(s) shall not be offered to BSc(Non-Medical) degree holders and vice versa.
5.3 FEE: The candidates admitted through LEET-TU (2013) are required to deposit the same tuition fee and other dues as applicable to the candidates admitted in BE/BTech through JEE (main)-2013 in the session 2013-2014.
GENERAL INFORMATION REGARDING LEET-TU ENTRANCE TEST INCLUDING ENTRANCE TEST SYLLABUS
I) For Diploma holders
There will be two papers as per details given below:
Paper I General
Paper II Professional
Duration of test: 180 minutes (150 Questions)
The question paper will contain multiple choice objective type questions of one mark each.
Paper-I shall contain 60 questions in all with 15 questions in each of Physics, Chemistry, Mathematics and English. Paper-II shall contain 90 questions in the relevant engineering discipline each carrying one mark.
1/4th marks shall be deducted for wrong answer.
PAPER-I GENERAL
MATHEMATICS
Algebra: Quadratic equation, equations reducible to quadratic form, relation between roots and coefficients. Arithmetic progression, Geometric progression, series of natural numbers, partial fractions, Binomial Theorem and its applications.
Trigonometry: Trigonometric ratios and their relations, Ratios of some standard angles, solution of trigonometric equations, sum and difference formulae, product formulas. Multiple and sub-multiple angles, solution of triangles.
Co-ordinate Geometry: Cartesian Co-ordinates, Equations of straight lines in various forms, Intersection of two straight lines, angles between two lines, Distance formulae, Equation of a circle in various forms, Tangent and normal to a circle.
Differential Calculus: Concept of a function, limit, standard limits, Continuity, Differentiation, their geometrical and physical meanings, Differentiation from first principles, Differentiation of sum, product, quotient of functions, function of a function, Differentiation of implicit functions , trigonometric functions and logarithmic differentiation.
Integral Calculus: Definite and Indefinite integrals, method of integration by substitution, by parts and partial fractions, Integration of rational and irrational functions.
PHYSICS
Heat: Heat as a form of energy, Mechanical equivalent of heat (Joule's experiment), Specific heat of a gas, Measurement of temperature, Platinum resistance and thermoelectric thermometers, Temperature scales, kinetic interpretation of temperature. Thermal expansion. Modes of heat transfer, Searle's method and Lee's method for thermal conductivity, Black body radiations, Stefan's law. Wien's law.
Acoustics: Wave motion, velocity of sound, Newton's formula and Laplace's correction, Beats, Doppler effect, Intensity of sound waves, Reverberation, Acoustics of buildings, Production and detection of ultrasonic waves.
Optics: Refraction through a compound plate, total internal reflection, Optical fiber, image formation by spherical mirrors/lenses, Lens makers formula, Chromatic aberration and its removal, Optical instruments- simple and compound microscopes, Astronomical telescope, Magnifying power & resolving power, Huygerns principle & its applications, Young's double slit experiment, Diffraction through a single slit, Polarisation of light,
Electricity and Magnetism: Electric field and electric potential, Electric dipole and its field, Gauss's law and applications, Energy stored in a capacitor, Dielectrics, Current Electricity, Kirchoffs laws and applications, Slide wire bridge, Potentiometer, Ammeter, Voltmeter, Thermal and chemical effects of current.
Electromagnetism: Magnetic effects of current, Biot-Savart law and applications, Lorentz force, Moving coil galvanometers, Laws of electromagnetic induction, Mutual and self inductance, AC generator, Alternating currents, LR, CR, LCR, circuits.
Modern Physics: Determination of e/m and e of electron, Bohr's model and hydrogen spectra, Spectral series, Photoelectric effect, Matter waves.
CHEMISTRY
Structure and bonding: Fundamental particles, Heisenberg's uncertainty principle, Quantum numbers, Pauli's exculsion principle, Aufbau rule, Hund's rule, ionic and Covalent bond, orbital concept of covalency, Hybridizsation (sp, sp2 and sp3).
Chemical Equilibria, Electrochemistry and Redox Chemistry: Balancing Chemical equations, Oxidation and Reduction reactions, electronic Concept, balancing redox reactions by oxidation number method. Faraday's laws of Electrolysis and its application in Electroplating, Electrometallurgy and Electrorefining, Degree of ionisation, Equilibria in aqueous solutions, solubility product and common ion effect, Modern concepts of acid & base, their strength and ionization constant, pH value, acid base titrations, choice of indicators and Buffer solutions.
Colloids and Water: Particle size and colloidal state, Preparation of colloids by dispersion and condensation, Stability and properties of colloids, Tyndell effect, Brownian movement, coagulation. Hard and soft water, degree of hardness and its determination, Disadvantage of hard water in industrial use and boilers.
Organic Chemistry: Nomenclature of organic compounds, IUPAC system. Saturated and unsaturated Hydrocarbons, Ethane, Ethylene and Acetylene.
Substitution and addition reactions (preliminary ideas). Isomerisation (Chain position, functional, cis-trans and optical), Aldehydes and Ketones, preparation, properties and qualitative tests. Polymerisation, addition and condensation polymerisation, degree of polymerisation, Linear and cross linked polymers.
ENGLISH
Idioms and phrases and their usage, Correction of sentences, sentence structure , sequence of tenses, Parts of speech, Words often confused in the form of pair of words, Common synonyms and antonyms, Active and Passive voice, Direct and indirect speech , Punctuation.
PAPER–II PROFESSIONAL
A. For candidates seeking admission to the discipline of MECHANICAL ENGINEERING/ INDUSTRIAL ENGINEERING*(BE [IE]-MBA)
Manufacturing Process: Dry sand and green sand casting: Casting defects: Die casting, Continuos casting and Centrifugal casting, Welding Process: Gas welding, Arc welding, Resistance welding; Thermit welding: Soldering and Brazing: Welding defects and precautions, Elements of metal cutting; Cutting tools tool geometry, Cutting fluids; Lathe and Milling operations: Grinding process, grinding wheel: Introduction to Broaching and gear generation processes; Electric discharge machinery. Water Jet machining and ultrasonic machining. Forming processes: Hot and Cold working: Rolling: Punching, blanking, shearing, spinning.
Thermal Engineering: Basic concept of Thermodynamics : Energy, Thermodynamics systems, types (open and closed) Heat and work, specific heat, Enthalpy, laws of
thermodynamics : Zeroth, First and Second laws Reversible and irreversible process, Entropy.
Description of various types of Boilers, boiler mountings and accessories. Basic concepts of thermal conduction, convection and radiation. Basic equations of different cases of Conduction. Convection (natural and forced) and radiation. Concept of Black, white and opaque bodies, Stefan Boltzmans laws.
Mechanics of Solids: Concepts of bending moment and shear force. Bending moment and shear force diagrams for cantilevers, simply supported beams, overhanging beams subjected to concentrated and U.D. Ls. Concepts of torsion. Derivation of torsion equation for circular shafts. Close coiled helical spring subjected to axial load and twisting moment, stiffness of a spring. Its angle of twist, strain energy and proof resilience.
Metrology: Necessity and importance of Metrology in Engineering field, standards of measurements, line and wave length : Limits, fits and tolerances. Concept of interchangeability. Angle and Taper Measurements : Slip gages and dial indicator in taper measurement. Screw Thread Measurements : Measurements of Mojor diameter. Minor diameter, effective diameter, pitch. Angle and Form of threads for external and internal threads. Comparator : Types of Comparators (Mechanical, optical, electrical, electronic and pneumatic). Limit gauges : Go and No-go gauges. Alignment tests on lathe. drilling machine. Milling machine and grinding machine.
Materials and Metallurgy: Introduction to Engineering materials, ferrous and non-ferrous materials : Pig iron grey and white cast iron, alloying elements in steel and their effect. High speed steel, heat resistant steel and spring steel. Aluminium and its alloys. Bearing metals. Plastic materials, refractory materials, tempering, hardening and surface hardening processes, selection of materials for different components.
Industrial Engineering and Management: Work study, uses of work study : Objectives and basic procedure of Method study and work measurements. Types of inspection, inspection at various stages. Quality control : its advantages : Statistical quality control. Control charts and sampling plans. Types of production : Materials requirements planning, Plant location and layout, types of layouts and their comparison. Importance and advantages of standardization. Cost reduction through standardization. Management of men, materials and machines. Types of industrial organisations : Wages and incentives, trade unions : Role of technician in industry.
Refrigeration and Air Conditioning: Basic concepts and principles of refrigeration : Refrigeration methods. Air refrigeration cycle, vapour compression cycle, simple vapour absorption cycle, their applications and limitations. Refrigerants : Important properties of refrigerants, properties and applications of commonly used refrigerants such as R11, R12, R22, NH3 etc. Air conditioning, its concepts. Human comfort, application of air conditioning, Description of room air conditioning, packages air conditioner, central air conditioning system.
Theory of Machines: Simple mechanisms : Flywheels, Co-efficient of friction, Motion of a body along horizontal and inclined planes. Friction in screw jack, friction between nut and screw square and V-threads. Concept of power transmission, various power transmission systems with their merits and demerits. Flat and V-belts drives, ratio of tensions. Horse power transmitted, centrifugal tension, condition for maximum power transmission, function of governors. Definitions of sensitivity, stability, synchornism and hunting of governors, description and simple problems on watt, porter and Hartnell governor.
(B) For candidates seeking admission to the discipline of ELECTRONICS & COMMUNICATION ENGINEERING, ELECTRONICS (INSTRUMENTATION & CONTROL) ENGINEERING
Basic Circuit Elements: Circuit laws and their applications in solving problems. Characteristics and applications of different types of diodes, Concepts of bipolar transistors and common base common emitter, common collector configuration and parameters.
Amplifiers: Different types of amplifiers, working principles and experssion of voltage gain, current gain, input impedance, output impedance, etc.
Network Analysis: Working principles of Multivibrators, time base, operational amplifier, timer and regulated power supply. Network theorems, all types of network, one port, two port, symmetrical, unsymmetrical balanced, T. Ladder, lattice, bridge, their characteristic impedance. Attenuators, filters. concept of different types of filters, Impedance matching of filters. Transmission lines,
concept and applications, characteristics impedance, different methods of loading, concepts of reflection and standing waves. Automatic Telephony.
Communication Theory and Systems: Communication systems types, types of modulation, amplitude modulation, frequency modulation, AM modulators. Demodulation of AM waves, FM waves, transmitters and radio receivers. Antenna and wave propagation. Types and areas of applications. Conducting materials, low and high resistivity materials, super conductivity. Development of modern insulating materials. Magnetic materials, permeability, Hysteresis loop, soft and hard magnetic materials. Components, Capacitor, polyster, Metallised, polyster gap ceramic, paper and electrolytic types. Resistors of different types. Transformers, Inductors and RF Coils, Printed circuit boards.
Measuring Instruments: Multimeters, types, application, different types of mV meters and mA meters-extension of range. CRO, operation, working applications, Audio power meter, impedance bridges. Q.meter, Regulated power supply, block diagram, significance, Digital instruments, block diagram, comparison with analog instruments.
Microprocessors and its applications: Microprocessor, structure of 8085. Instruction set and addressing mode. Simple programming in assembly language. Input/output operations, concept of interrupts structure and programming of 8155/8156. Microprocessor applications.
Transducers: Electro-accoustic transducer, microphones, loudspeakers, sound recording in different types, hi-fi and PA system. VCR and Video recording. T.V. equipment and Video display unit.
Power Electronics: Thyristor, principle, characteristics and applications in industry.
TV Engineering: Introduction to Monochrome TV receiver circuits and basics of colour TV systems.
(C) For candidates seeking admission to the discipline of COMPUTER ENGINEERING
Analog & Digital Electronics
PN junction diode, V-I characteristics, Diode as half wave, full wave and bridge rectifier, Zener diodes, CB, CE, CC configuration of the transistor, Binary and hexadecimal number system, Binary addition, subtraction, multiplication and division, Logic Gates, DE Morgan’s Theorems, K-Map, TTL and MOS families, BCD, excess-3 and Gray code, Arithmetic circuits, Decoders, Multiplexers and De-Multiplexers, flip flops, Counters, Types of RAM/ROM, A/D and D/A conversion.
Programming Language C
Constants, variables and data types, Operators and Expressions, Control Structures, Functions, Arrays, Pointers, Strings, Structure and Unions, File Handling.
System Analysis and Design
Systems Development Life Cycle, Feasibility Study, cost and benefit analysis, Requirement Specifications and Analysis.
Introduction to Databases
Architecture and structure of Database Management System, data independence, ER Diagrams, Introduction to network, hierarchical and relational model, Domain, Attributes, Tuples and Relations, Entity and referential integrity, keys, Normalization, First, Second and Third normal forms, Boyce/Codd normal form, Structured Query Language: DDL and DML statements.
Data Structure
Basics, Arrays, Operations on arrays with Algorithms (searching, traversing, inserting, deleting), Traversing a linked list, Searching linked list, Insertion and deletion into linked list, Application of linked lists, Doubly linked lists, Stacks, Queues, Binary Trees, Search algorithm (Linear and Binary), Sorting algorithms (Bubble Sort, Insertion Sort, Quick Sort, Selection Sort, Merge Sort, Heap Sort) and their comparisons.
Computer Architecture
Instruction Code, Instruction Cycle, Instruction types, Design of basic computer, Register Organization, Addressing modes, Introduction to RISC, CISC architecture, Control Unit - Hard wired and Micro programmed, Pipeline processing, Memory Hierarchy, associative memory, cache memory, virtual memory, I/O organization.
Data Communication and Computer Networks
LAN, MAN and WAN, OSI Model, Topologies, Basic access protocols: CSMA/CD, Token Passing, Ethernet, Error Detection, Network connectivity Devices, NICs, Hubs, Repeaters, Multiplexers, Modems, Routers and Protocols, Firewall, ATM, Different classes of IP addressing, Protocol Suites.
Object Oriented Programming Using C++
Procedure oriented programming Vs. Object oriented programming (OOP), Classes, Objects, reusability, encapsulation, dynamic binding, message passing, Constructor and Destructor, Member Functions, Overloading Member Functions, Inheritance, Protected, private and public data, types of inheritance, single inheritance, hierarchical inheritance, multiple inheritance, Polymorphism and Virtual Functions.
Operating System(OS)
System Software: Compiler, Assembler, Loader, Definition, types and importance of Operating Systems, Memory organization, Process Management Functions, Job Scheduler, Process Scheduler, Process synchronization, Memory Management Function, Segmentation, Swapping, Simple Paging System, Virtual Memory, I/O Management Functions, Dedicated Devices.
(D) For candidates seeking admission to the discipline of ELECTRICAL ENGINEERING
Introduction: Comparison of copper and aluminum as electrical conducting material. Development of modern insulating materials. Development of dynamo grade and transformer grade silicon sheet steel materials. Circuit laws and their applications in solving problems. Concept of permeability, reluctance, mmf, coreless. concept of phase difference, phase representation of alternating quantities.
Poly Phase System: Production of rotating magnetic field in electrical machines. Characteristics of D.C. machines. Shunt series and compound types, speed control of D.C. motors. Transformer-single phase, three phase, phasor diagrams, equivalent circuits, testing, regulation, losses, efficiency, parallel operation, maintenance.
Three Phase Induction Motor: Slip, torque & their various relations. Torque-slip characteristics, equivalent circuit, starting, testing, speed control, maintenance.
Single Phase Induction Motor: Torque/Speed characteristics, methods of producing starting torque, capacitor, shaded pole and reluctance motors.
AC Series Motor, Universal Motor: Synchronous machines : Speed/frequency relation, EMF equation, winding coefficients, synchronous impedance concept, phasor diagram, Regulation. Parallel operation, V curves, starting.
Measuring Instruments: Indicating, integrating and recording instruments : deflecting, controlling and damping torques ; moving coil and moving iron instruments, sources of errors extension range Wattmeters, Dynamometer type, maximum demand indicators, Energymeters-single phase and three phase, Megger, Earth tester, Multimeter, power factor meter.
Electronic Instruments: VTVM, CRO, Electronic multimeter, Analog multimeter, digital meters. Measurement of inductance and capacitance and capacitance, power measurements in 3 ph. Circuits.
Transmission System: Selection of voltage, comparison of A.C. and D.C. systems, comparison of 3 ph. & 1ph. Systems. Electrical features of transmission line : Calculation of resistance, inductance and capacitance in a.c. transmission lines. Problems on efficiency and regulation, corona. Distribution system : Layout of H.T. and L.T. distribution system. Comparison of overhead and underground distribution system. Estimation, Generation. Conventional and Non-conventional sources of energy. Different types of power stations. Comparison, Load estimation – concept, types of power stations, comparison, Load estimation, concept of regional and national grid. Switch gear system :- Circuit breakers, Types, ratings, Comparison, Protection :- Fuses, relays, types & characteristics, comparison. Protection schemes of generators, transformers, bus bars, feeders.
(E) For candidates seeking admission to the discipline of CIVIL ENGINEERING
Structural Engineering: Simple stresses and strains, Elasticity, Hooke’s Law, Moduli of Elasticity and Rigidity. Stresses and strains of homogeneous materials and composite secstions. Types of beams and supports and loads, concept of bending moment and shear force. Bending moment and shear force diagrams for simple cases. Diflection in beams. Moment area theorem, Bending and shear stresses in circular, rectangular, T and L sections, Comparsion of strength of the above sections, Design of singly and doubly Reinforced beams, Design of columns-Types of Columns. Short and long column, load carrying capacity, effective length of column, lateral and helical ties. I.S. Specifications for reinforcement detailing. Design of slabs types of slabs, one-way slab, two way slab, I.S. specifications for Reinforcement detailing method of design as per I.S. code. Design of foundations-isolated footing rectangular footing, square footings, circular footings. Design of tension members in structural steel, gross area, net area, tension splice, design of tension member . Design of compression members, column splice, load carrying capacitites. Design of beams in structural steel.
Surveying: Linear measurements with tape, corrections, chain surveying, offsets, perpendicular offset, oblique offset, measurement of offsets, limiting length of offset, Field book, Instructions for booking field notes, Instruments for setting out right angles, Campass susrveying , Prismatic compass. Surveyor’s compass, comparison between prismatic and surveyor’s compass, meridians & bearings, calculation of included angles from bearings, calculation of bearing from including angles, local attraction, magnetic declination levelling, types of levels. Principles of levelling, Classification of levelling. Rise & Fall method, Height of Instrument method, various corrections in levelling . Theodolite surveying, measurement of angle by theodolisty.
Transportation Engineering: Introduction of Transportation Engineering, Traffic Engineering, Road materials, Geomatric design, Design of flexible and rigid pavements, Road maintenance, Railway Engg. Rails, Sleepers, ballast, points and crossing, Track laying and track maintenance, typical sections of tunnel, method of construction of tunnels in soft rock.
Soil and Construction Engineering: Foundations-types, construction details, walls, load bearing and non-load bearing walls, brick masonry, bonds in masonry, stone masonry, type of a stone masonry, partiton walls, doors. Floors-types of floors, construction procedure, maintenance of buildings, properties of bricks and stones, cement,
aggregates, workability of concrete, Batching, mixing, compaction, placing, curring of concrete. Properties of hardned concrete. Introduction to soil mechanics, Soiol classification. Index properties of soil, Shear strength concept.
Fluid Mechanics, Irrigation and Water Supply Engineering: Specific weight, density, specific gravity, viscosity, vapour pressure, cohesion, adhesion, surface tension, capilarity and compressibility. Pressure, intensity of pressure, pressure head, pascal’s Law and its appplications. Total pressure, resultant pressure and centre of pressure on rectangular, triangular, trapezoidal, circular and curved surfaces. Atmospheric, gauge and absolute pressure, simple differential manometers. Steady and unsteady flow, laminar and turbulent flow, uniform and nonuniform flow. Discharge and continity equation, Bernoulli’s theorem, statement and description, venturimeter, orifices, time of emptying tanks of uniform cross section by a single orifice. Laminar and turbulent flow explained through. Reynolds experiments. Reynolds number and critical velcity and velcity distribution, losses in pipes, hyraulic gradient line, total energy line flow from one reservoir to another thorugh a long pipe of uniform and composit section. Water hammer, uniform and non-uniform flow, discharge through channels using chezy’s formula and Manning’s formula . Most economical sections, rectangular, trapezoidal and circular. Measurement of discharge by notches and weirs, measurement of velocity by pitot tube and current meter. Introduction to irrigation Engg. Flow irrigation, head works and river training works, water logging, water supply, sources of water,Water treatment. Types of pipes, lying of pipeps. Quality of sewage, laying of sewers, Building drainage and rural sanitation.
(F) For candidates seeking admission to the discipline of CHEMICAL ENGINEERING and BIOTECHNOLOGY
Basic Chemical Engineering: Units & conversions, Dimensional analysis, Gas Law, Material Balance consisting key componenets, simultaneous Equation By pass and recycle. Energy Balance. The first law type of heat effects, heat capacities, thermochemistry.
Fluid Flow and Mechanical Operation: Flow of incompressible Fluids, Laminar and Turbulent Flow in Pipes, Frictional Losses in pipes.
Flow Measurement: Pitot tube orfice meter, venturmeter, Rotamater, Weir & Notches, (their construction and derivation with formula ).
Transportation of Fluids: Classification of Pumps, construction and operation of reciprocating, rotary, centrifugal and gear Pumps. Different type of valves, fans, blowers and compressors, Description of various size reduction equipments and law’s for power requirement. Seperations, Screening, filteration thickeners, classifiers, Centrifuges and cyclone separator.
Heat Transfer & Mass Transfer
Heat Transfer: Conduction, Fourier’s law, Heat Flow through composite walls, Cylinders and spheres, insulations.
Convection: Natural & Forced convection, LMTD, Significance of Reynold number, Prandit’s number and Grashof Number.
Radiation: Kirchoff’s Law, Emissive power, wein’s displacement law, stefan Boltzman law, Emissivity, Absorptivity, Black Body and Green Body radiations. Boiling, Condensation and evaporation, Heat Exchanger: Double Pipe Shell & Tube.
Mass Transfer: Principles and Description of various unit operations involving mass transfer such as Distilation, Absorption, Extraction, crystallization & Drying.
Unit Processes & Process Technology : Principles of some unit Processes such as Nitration. Sulphonation, Halozenation, Oxidation, Reduction, and Products based on them. Basic Processes for the manufacture of products such as sugar, Fertilizer. Dyestuffs and paints.
Process Instrumentation & Control: Principle and Application of following Instruments device. Pressure and Vaccum Gauge. Thermometer and Pyrometer, Liquid Level meter : Visual indicators. Float actuated level meter.
Analysers: PH meter, oxygen analyzer colorimetric analyzers. Infra red & near Infix analyzer.
Transmission: Pneumatic and Inductance transmission. Concept and advantage of automatic Process Control.
Controllers: Pneumatic, Electronics, hydraulilc, FD, TI, ID Controllers.
Engineering Material: Types of Different materials, such as metals, alloys and polymer their structure. Composition and application of these materials for various situations in Chemical Industry.
Sample Questions
PAPER – 1(GENERAL)
PHYSICS
1. The earth receives solar radiation, from which one can find the temperature of the surface of the sun. The approximate temperature of sun’s surface is
(A) 600 K (B) 900 K (C) 60,000 K (D) 6,000 K
2. The characteristics of a fuse wire should be
(A) low resistivity and high melting point.
(B) high resistivity and high melting point.
(C) high resistivity and low melting point.
(D) low resistivity and low melting point.
CHEMISTRY
1. When HCl gas is passed through a saturated brine solution, NaCl is precipitated because
(A) NaCl is not soluble in acidic solution.
(B) Solubility product of NaCl decreases in presence of H+ ion.
(C) Saturated solution cannot hold any more solute, hence NaCl
precipitates.
(D) In presence of Cl- ion, ionic concentration exceeds solubility
product of NaCl, therefore NaCl separates out.
2. When 13.5 gm of Al is deposited on passing current through molten Alumina, the number of faradays of electricity consumed would be
(A) 0.5 (B) 1.0 (C) 1.5 (D) 2.0
MATHEMATICS
1. If the quadratic equation (a2+b2)x2+2b(a+c)x+(b2+c2)=0 has equal roots, then
(A) a, b and c are in A.P.
(B) a, b and c are in G.P.
(C) a, c and b are in A.P.
(D) a, c and b are in G.P.
2. If the angles of a triangle ABC are in the ratio 1:2:3, then a:b:c is
(A) 1 : 3 : 2 (B) 1 : 2 : 3
(C) 1 : 2 : 5 (D) 1 : 22 : 3
ENGLISH
1. Choose the appropriate antonym for the following : “Fundamental”
(A) superfluous (B) superficial (C) profound (D) particular
2. Choose the most appropriate ACTIVE form for the PASSIVE sentence given below :
PASSIVE : “They are likely to be punished”
ACTIVE :
(A) It is likely that they will be punished.
(B) It is likely for someone to punish them.
(C) It is likely that someone will punish them.
(D) Someone is likely to punish them.
PAPER – II (PROFESSIONAL)
COMPUTER ENGINEERING
1. The structure of the Colpitts oscillator is related to the
(A) Hartley oscillator
(B) Wein Bridge oscillator
(C) Phase shift oscillator
(D) Square wave oscillator
2. Microprogramming refers to
(A) Developing software for a small computer, like a palmtop.
(B) Programming in any situations where the memory available is very low
(C) Control programs for controlling gates within a CPU.
(D) Writing programs in assembly language.
CIVIL ENGINEERING
1. A combined footing is generally used when
(A) Number of columns is more than two and they are spaced far apart.
(B) Number of columns is two and they are spaced far close to each other.
(C) Number of columns is two and they are spaced far apart.
(D) There is only one column.
2. In slow sand filters, the rate of filtration of water is in the range of
(A) 175-250 lits/sqm/hr
(B) 500-1000 lits/sqm/hr
(C) 1000-5000 lits/sqm/kr
(D) 6000-10,000 lits/sqm/hr
MECHANICAL ENGINEERING/ INDUSTRIAL ENGINEERING*(BE [IE]-MBA)
1. When fluid flows in a pipe, the Nusselt number can be calculated from the relation
(A) V.D. / (B) .Cp/K (C) h.D/K (D) K.D/Cp
2. Angle of torsion refers to the
(A) Maximum angle by which the shaft bends during power transmission.
(B) Angle through which one end of a shaft will twist relative to the other end.
(C) Angular velocity of the shaft in radians.
(D) Angular moment at the cross section.
CHEMICAL ENGINEERING/Biotechnology
1. Stainless steel 316 contains
(A) 18% chromium and 11% nickel
(B) 16% chromium and 13% nickel
(C) 11% chromium and 18% nickel
(D) No chromium and 8% nickel.
2. The viscosity of a liquid
(A) Is directly proportional to temperature.
(B) Is inversely proportional to temperature.
(C) Is directly proportional to the square root of temperature
(D) Is inversely proportional to the square root of temperature.
ELECTRONICS & COMMUNICATION ENGINEERING/ ELECTRONICS (INSTRUMENTATION & CONTROL) ENGINEERING
1. A direct coupled amplifier has a gain of 1000 and 3 dB frequency of 1000 KHz. What is its unity gain frequency?
(A) 100 KHz (B) 1000 KHz (C) 108 Hz (D) 10 KHz
ELECTRICAL ENGINEERING
1. For parallel operation of two alternators, which of the following
factor(s) should be identical for both?
(A) Voltage only (B) Frequency
(C) Phase sequence (D) All of the above.
2. Mark the correct answer below as the load on an induction motor is
increased upto full load :
PF Slip Efficiency
(A) increases increases increases
(B) decreases increases increases
(C) decreases decreases decreases
(D) increases decreases decreases
I) For BSc (Non-Medical) holders
Duration of test: 180 minutes (150 Questions)
Physics (40 Questions) Chemistry (40 Questions) Mathematics (40 Questions) and English & Reasoning (30 Questions)
1/4th marks shall be deducted for wrong answer.
Chemistry
Periodic Table: Periodic classification of elements and periodicity in properties; general properties of s, p, d and f block elements.
Hard and Soft Acids and Bases: Classification of acids and bases as hard and soft. Pearson's HSAB concept, acid-base strength and hardness and softness. Symbiosis, theoretical basis of. hardness and softness, electronegativity and hardness and softness.
Metal-Iigand Bonding in Transition Metal Complexes: Limitations of valence bond theory, an elementary idea of crystal-field theory, crystal field splitting in octahedral, tetrahedral and square planar complexes, factors affecting the crystal-field parameters.
Magnetic Properties of Transition Metal Complexes: Types of magnetic behavior, methods of determining magnetic susceptibility, spin-only formula. L-S coupling, correlation of μs and μeff values, orbital contribution to magnetic moments, application of magnetic moment data for 3d-metal complexes.
Organometallic Chemistry: Definition, nomenclature and classification of organometallic compounds. Preparation, properties, bonding and applications of alkyls and aryls of Li, AI, Hg, Sn and Ti, metal-ethylenic complexes and homogeneous hydrogenation, mononuclear carbonyls and the nature of bonding in metal carbonyls. Organomagnesium compounds: the Grignard reagents - formation, structure and chemical reactions. Organozinc compounds: formation and chemical reactions.
Spectroscopy: Electromagnetic radiation, regions of the spectrum, basic features of different spectrometers, statement of the Born-Oppenheimer approximation, degrees of freedom.
UV-Visible Spectroscopy: Beer-Lambert’s law, molar absorptivity, presentation and analysis of UV spectra, types of electronic transitions, effect of conjugation. Concept of chromophore and auxochrome. Bathochromic, hypsochromic, hyperchromic and hypochromic shifts. UV spectra of conjugated enes and enones.
Infrared absorption spectroscopy: molecular vibrations, Hooke's law, selection rules, intensity and position of IR bands, measurement of IR spectrum, fingerprint region characteristic absorptions of various functional groups and interpretation of IR spectra of simple organic compounds.
Nuclear magnetic resonance (NMR) spectroscopy: 1H NMR spectroscopy, nuclear shielding and deshielding, chemical shift and molecular structure, spin-spin splitting and coupling constants, areas of signals, interpretation of PMR spectra of simple organic molecules.
Stereochemistry of Organic Compounds: Concept of isomerism. Types of isomerism, Optical isomerism - elements of symmetry, molecular chirality, enantiomers, stereogenic centre, optical activity, properties of enantiomers, chiral and achiral molecules with two stereogenic centres, diastereomers, threo and erythro diastereomers, meso compounds, resolution of enantiomers, inversion, retention and racemization. Relative and absolute configuration, sequence rules, D & L and R & S systems of nomenclature. Geometric isomerism - determination of configuration of geometric isomers. E & Z system of nomenclature, geometric isomerism in oximes and alicyclic compounds. Conformational isomerism - conformational analysis of ethane and n-butane, conformations of cyclohexane, axial and equatorial bonds, conformation of mono substituted cyclohexane derivatives. Newman projection and Sawhorse formulae, Fischer and flying wedge formulae.
Heterocyclic Compounds: Molecular orbital picture and aromatic characteristics of pyrrole, furan, thiophene and pyridine. Synthesis, properties and chemical reactions with particular emphasis on the mechanism of electrophilic substitution. Mechanism of nucleophilic substitution reactions in pyridine derivatives. Preparation and reactions of indole, quinoline and isoquinoline with special reference to Fisher indole synthesis, Skraup synthesis and Bischler-Napieralski synthesis. Mechanism of electrophilic substitution reactions of indole, quinoline and isoquinoline.
Organic Synthesis via Enolates: Acidity of α-hydrogens, alkylation of diethyl malonate and ethyl acetoacetate. Synthesis of ethyl acetoacetate: the Claisen condensation. Keto-enol tautomerism of ethyl acetoacetate. Alkylation of 1,3-dithianes. Alkylation and acylation of enamines.
Carbohydrates: Classification and nomenclature. Monosaccharides, mechanism of osazone formation, interconversion of glucose and fructose, chain lengthening and chain shortening of aldoses. Configuration of monosaccharides. Erythro and threo diastereomers. Conversion of glucose into mannose. Formation of glycosides, ethers and esters. Determination of ring size of monosaccharides. Cyclic structure of D-(+)-glucose. Mechanism of mutarotation. Structures of ribose and deoxyribose. Amino Acids, Peptides, Proteins and Nucleic Acids: Classification, structure and stereochemistry of amino acids. Acid-base behavior, isoelectric point and electrophoresis. Preparation and reactions of α-amino acids. Structure and nomenclature of peptides and proteins. Classification of proteins. Peptide structure determination, and group analysis, selective hydrolysis of peptides. Classical peptide synthesis, solid-phase peptide synthesis. Structures of peptides and proteins. Levels of protein structure. Protein denaturation/renaturation.
Nucleic acids: Constituents of nucleic acids. Ribonucleosides and ribonucleotides. The double helical structure of DNA.
Synthetic Polymers: Addition or chain-growth polymerization. Free radical vinyl polymerization, ionic vinyl polymerization, Ziegler-Natta polymerization. Polyesters, polyamides, phenol formaldehyde resins, urea formaldehyde resins, epoxy resins and polyurethanes. Natural and synthetic rubbers.
Atomic Structure: De Broglie hypothesis, the Heisenberg's uncertainty principle, Significance of ψ and ψ2, quantum numbers, Schrödinger wave equation and its importance, physical interpretation of the wave function. Hund’s rule and electronic configuration of elements.
Mathematics
Algebra: Set theory, Relations, Mapping and its applications, Permutations and combinations, Types of matrices, Rank and inverse of a matrix, Linear independence and linear dependence, Solution of system of linear equations, Eigen values and Eigen vectors of a matrix, Cayley Hamilton theorem.
Calculus: Limits, Continuity and Differentiability, Rolle’s and Mean value theorems, Successive differentiation, Partial differentiation, Maxima and Minima of function of one and two variables, Maclaurin’s and Taylor’s theorem for functions of one and two variables, Definite integral and its applications, Beta and gamma function, Double integral and its applications, Laplace and inverse Laplace transform and their properties, Convolution theorem.
Differential Equation: Ordinary differential equations of first order and their solutions, Linear differential equations of higher order with constant coefficients, Classification of partial differential equations, Partial differential equations of first order, Lagrange’s solution, Charpit’s method.
Analysis: Riemann integral, Integrability of continuous and monotonic functions, Mean value theorems of integral calculus, Infinite series and their convergence, Demoivre’s theorem and its applications, Functions of complex variables, Analytic function, C-R equations.
Abstract Algebra: Groups, Subgroups and their properties, Lagrange’s theorem, Rings, Subrings, Integral domain and Field, Vector spaces, Subspaces and their properties, Inner product spaces, Orthogonal vectors.
Numerical Analysis: Solution of non linear equations using iterative methods, Interpolation for equally and unequally spaced data, Trapezoidal and Simpson’s rules for integration.
Statistics, Probability and Linear Programming: Measures of central tendency, Dispersion, Skewness and kurtosis, Correlation and regression, Basic concepts of probability, Conditional probability, Baye’s theorem, Discrete and continuous distributions ( Binomial , Poisson and Normal), Fundamentals of linear programming problems, Graphical solution, Simplex method and its variants.
Physics
Mechanics and Waves: Newton's laws of motion and applications, variable mass systems, projectiles. Rotational dynamics-kinetic energy, angular momentum, theorems of moment of intertia. Conservative forces, frictional forces. Gravitaional potential and intensity due to spherical objects. Central forces, Kepler's problem, escape velocity and artificial satellites. Streamline motion, viscosity, Applications of Bernoulli's equation and Stokes' law. Special relativity, length contraction, time dilation, mass-energy relation. Simple harmonic motion, Lissajous figures. Damped oscillation, forced oscillation and resonance. Beats, Phase and group velocities. longitudinal waves in solids. Doppler effect, Ultrasonic and their applications.
Geometrical and Physical Optics: Laws of reflection and refraction from Fermat's principle. Matrix method in paraxial optics- thin lens formula, nodal planes, system of two thin lenses. Chromatic and spherical aberrations. Huygens' principle-reflection and refraction of waves. Interference of light-Young's experiment, Newton's rings, interference by thin films, Michelson interferometer. Fraunhofer diffraction-single slit, double slit, diffraction grating, resolving power. Production and detection of linearly, circularly and elliptically polarised light. Double refraction, quarter-waves plates and half-wave plates. Optical activity and applications. Elements of fibre optics-attenuation; pulse dispersion in step index and parabolic index fibres; material dispersion. Lasers, characteristics of laser light-spatial and temporal coherence.
Heat and Thermodynamics: Thermal equilibrium and temperature. The zeroth law of thermodynamics. Heat and the first law of thermodynamics. Efficiency of Carnot engines. Entropy and the second law of thermodynamics. Kinetic theory and the equation of state of an ideal gas. Mean free path, distribution of molecular speeds and energies. Trasport phenomena. Andrew's experiements-van der Waals equation and applications. Joule-Kelvin effect and applications. Brownian motion. Thermodynamic potentials-Maxwell relations. Phase transitions. Kirchhoff's laws. Black-body radiation-Stefan-Boltzmann law, spectral radiancy, Wien displacement law, application to the cosmic microwave background radiation, Planck radiation law.
Electricity and Magnetism: Electric charge, Coulomb's law, electric field, Gauss' law. Electric potential, van de Graff accelerator. Capacitors, dielectrics and polarization. Ohm's law, Kirchhoff's first and second rules, resistors in series and parallel, applications to two-loop circuits. Magnietic field-Gauss'law for magnetism, atomic and nuclear magnetism, magnetic susceptibility, classification of magnetic materials. Cirulating charges, cyclotron, synchrotron. Hall effect. Biot-Savart law, Ampere's law, Faraday's law of induction., Lenz's law. Inductance. Alternating current circuits-RC, LR, single-loop LRC circuits, impedance, resonance, power in AC circuits. Displacement current, Maxwell's equations.
Atomic and Nuclear Physics: Photoelectric effect, Einstein's photon theory. Bohr's theory of hydrogen atom. Stern-Gerlach experiment, quantisation of angular momentum, electron spin. Pauli exclusion principle and applications. Zeeman effect. X-ray spectrum. Compton effect, Compton wavelength. Wave nature of matter, de Broglie wavelength, wave-particle duality. Heisenberg's uncertainty relationships.
Schroedinger's equation-eigenvalues and eigenfunctions of (i) particle in a box, (ii) simple harmonic oscillator and (iii) hydrogen atom. Natural and artificial radioactivity. Binding energy of nuclei, nuclear fission and fusion. Classification of elementary particles.
Solid State Physics: Crystal structure, x-ray diffraction, Bragg’s law, Bonding, covalent, ionic, metallic, Van der Walls bonding, Magnetism, Dia, Para and Ferromagnetism, Hysteresis. Thermal properties, lattice vibrations, Debye model. Band structure, energy band, energy gap, metals, insulators and semiconductors.
English, Analytical Reasoning & Mental ability.
Interpersonal skills including communication skills, anonyms/synonyms, sentence completion, active/passive voice, prepositions, direct/indirect speech, idioms & phrases.
Critical reasoning, visual reasoning, assumption-premise-conclusion, assertion and reasons; statements and assumptions, identifying valid inferences, identifying strong arguments and weak arguments, statements and conclusions; cause and effect, identifying probably true, probably false, definitely true, definitely false kind of statement; linear arrangements, matrix arrangements, puzzles, family tree problem, symbol based problems; coding and decoding, sequencing, identifying next number in series, etc;
6. MCA PROGRAMME
6.1 MODES OF PROGRAMME:
o Regular Mode
o Distance Education Mode
6.2 ELIGIBILITY (For both Regular and Distance Education Mode):
Recognised Bachelors degree of minimum 3 years duration in any discipline with Mathematics at least at 10+2 school level and has also qualified in the Entrance Test to be conducted by the University.
OR
Recognised Bachelor’s Degree of minimum 3 years duration in any discipline with Mathematics as one of the subjects and has also qualified in the Entrance Test to be conducted by the University.
6.3 REGULAR MODE
6.3.1 Duration of the Programme:
The programme is spread over a period of three years consisting of six semesters. The students study courses for five semesters at the University and do a Software Development Project (SDP) in the sixth semester in some reputed industry.
6.3.2 Number of Seats: 120
In addition to above seats, 1% over and above seats are reserved for children of employees of Thapar University. The candidates seeking admission under this category are required to satisfy the eligibility as mentioned above at 6.2.
6.3.3 Distribution of Seats:
General
SC/ST
PH
Total
86
30
4
120 (+ 18 FN/NRI seats. Refer section 13 for eligibility & other conditions)
6.4 DISTANCE EDUCATION MODE:
This programme is also spread over a period of three years consisting of six semesters. The programme is approved by the UGC-AICTE-DEC. The students study courses for five semesters and do a software development project in the sixth semester in the Institution/Industry recognized by TU. The objective of the programme is to provide an opportunity to those students who want to upgrade their studies/ knowledge through distance education as well as for those who are working in any organization. The main thrust in the programme will be to polish the professional aptitude of the students through lectures by the experts in their respective fields.
6.4.1 Salient Features of Distance Education Mode:
 Admission would be made once in a year along with regular MCA students through the same Entrance test conducted by Thapar University, Patiala.
 Expert Lecture notes/ Self Instruction Material would be provided to students at the start of each semester for each subject.
 Ten (10) personal contact hours for laboratory work per semester would be made available for all the students for each subject having laboratory component.
 16 weeks Project semester would be on similar lines as that for regular MCA students.
 Students would be provided one instructor in-charge for each subject in each semester for clearing the problems.
 Evaluation of the students would be made in the form of quizzes/short answer type questions/ laboratory examination/ assignment sheets and end semester examination with different weightage to each component.
6.4.2 Number of seats: 60
General
SC/ST
PH
Total
43
15
2
60
Note:
1 The University, if deems fit, may also admit students in Distance Mode in August 2013 for vacant seats (if any). The eligibility will be same as mentioned at 6.2 above & schedule of admission shall be available on our website in the last week of July 2013.
2 MCA (Distance mode) shall run only if minimum of 10 students are admitted in the program.
6.5 Mode of Selection: Admission shall be made on the merit of the entrance test to be conducted online by the University across India. The candidates having minimum 20% (15% for SC/ST) in the entrance test shall only be considered for admission.
GENERAL INFORMATION REGARDING MCA ENTRANCE TEST INCLUDING ENTRANCE TEST SYLLABUS
Duration of Test: 3 Hrs
No. of Questions : 150
There will be objective type questions. 1/4th marks shall be deducted for wrong answer.
Section-I: Mathematics (60 Questions)
1. Geometry: Two-Dimensional; straight lines, circles and conic sections, Three-Dimensional; straight lines and spheres.
2. Algebra: Set theory, Relations, Mappings and its applications, Permutations and Combinations.
3. Calculus: Limits, Continuity and Differentiability, Rolle's and Mean value theorems, Differentiation, Partial Differentiation, Maxima and Minima of functions of one and two variable. Successive differentiation. Integration by using substitution, partial fraction and by parts, Definite integral and its properties, Applications of definite integral to evaluate length and area of simple plane curves.
4. Vector Analysis: Scalar and vector products of two , three and four vectors and their applications.
5. Statistics, Probability and Linear programming: Measures of Central tendency, Dispersion, Skewness and Kurtosis. Correlation and Regression. B a s i c c o n c e p t s o f p r o b a b i l i t y, C o n d i t i o n a l pr o b a b i l i t y, B a y e ' s theorem, Discrete and continuous distributions (Binomial, Poisson, and Normal distributions), Fundamentals of linear programming problems, Graphical solution, Simplex method and its variants.
6. Matrices: Types of matrices rank of a matrix, solution of system of linear equations, Cayley Hamilton theorem, Inverse of a matrix, Determinant and its properties.
7. Numerical Analysis: Solution of non-linear equations using iterative methods, Interpolation
(Newton's, Lagrange's and Forward formulae), Numerical Integration (Trapezoidal and Simpson Rule).
Section-II: Computer Awareness (50 Questions)
o Computer Basics : Organization of a computer, Central Processing Unit (CPU), input/output devices, computer memory, memory organization, back-up devices, Categories of Computers.
o Data Representation : Representation of characters, integers, and fractions, binary and hexadecimal representations, Binary Arithmetic: Addition, subtraction, division, multiplication, floating point representation of numbers, normalized floating point representation, Boolean algebra: truth tables, Venn diagrams.
o Basics of C Programming and Operating Systems : Computer programming in C : data types, loop and control statements, functions. Fundamentals of operating systems: multiprogramming, multitasking, Multiprocessing and
time sharing systems.
o Networking and Internet : Categories of Computer Network, Network
topologies, Network media, Concepts of LAN, MAN and WAN, Search
Engines, Basic internet applications.
Section-III: Analytical Ability, Communication Skills and General Knowledge:
(40 Questions)
The questions in this section will cover logical reasoning, quantitative reasoning,
visual-spatial reasoning and Communication skills. This section shall also contain
questions to test the general knowledge about business, finance, industry,
transportation, scient i f ic invent ions , informat ion technology ,
governance, heal thcare, cultural dimensions etc.
Model Questions
Section –I (Mathematics)
1. The mean and standard deviation of a Binomial distribution are 10 and 2
respectively, then the value of p ( the probability of success) is
(A) 0.3 (B) 0.6 (C) 0.2 (D) 0.4
2. If 1 1 3  1 4  72 3   a x  x  x  and unity as the interval of differencing, then a is
equal to
(A) 1 (B) 1
(C) 2 (D) None of these
3. The vectors 2 , 2 3 ,
     
i  j  k i  j  k and
  
3 i  j 5 k are coplanar if
(A)   2 (B)   4
(C)   5 (D)   4
4. The area enclosed within the curve x  y 1 is
(A) 2 (B) 2
(C) 2 2 (D) None of these
5. In an LPP, Let k variables out of n variables be unrestricted in sign. The number of
non- negative variables in standard form of this LPP, are
(A) 2k (B) k 1
(C) either k or k 1 (D) None of these
Section – II (Computer Awareness)
1. The fastest and most expensive type of storage device is a
(A) electronic disk (B) register
(C) cache (D) magnetic tape
2. Which is not a Keyword in C?
(A) auto (B) else
(C) for (D) pointer
3. How many main functions can be used in a C program?
(A) 0 (B) 1
(C) 2 (D) Any Number
4. A half-adder is also known as
(A) AND circuit (B) NAND circuit
(C) NOR circuit (D) EX-OR circuit
5. What is the output of the following?
void main()
{
int a=10,b=20;
char x=1,y=0;
if(a,b,x,y)
{
printf("EXAM");
}
}
(A) XAM is printed (B) exam is printed
(C) Compiler Error (D) Nothing is printed
Section –III (Analytical Ability, Communication Skills and General Knowledge)
1... A is the father of X. B is the mother of Y. The sister of X and Z is Y. Which of the following statements is definitely not true?
(A) B is the wife of A (B) B has one daughter
(C) Y is the son of A (D) None of these
2... The radius of a circle has been reduced from 9 cm to 7 cm. The approximate percentage decrease in area is
(A) 31.5% (B) 39.5%
(C) 34.5% (D) None of these
3... When we are talking to ourselves we are practicing _______________ communication
(A) Interpersonal (B) Intrapersonal
(C) Meditative (D) None of the above
4. India’s first surface missile was named
(A) Akash (B) Nag
(C) Prithvi (D) Agni
7. MSc PROGRAMMES
TU offers following MSc programmes of two years duration (4 Semesters):
(i) MSc (Biotechnology)
(ii) MSc (Chemistry)
(iii) MSc (Mathematics and Computing)
(iv) MSc (Microbiology)
(v) MSc (Physics)
(vi) MSc (Environmental Sciences)
7.1 MSc (Biotechnology) / MSc (Microbiology)/ MSc (Environmental Science)
a) Eligibility for MSc (Biotechnology)
Candidates with bachelor's degree with minimum of 50% marks in graduation from recognized University under 10+2+3 pattern of education in Physical, Biological, Agricultural, Veterinary, and Fishery Sciences, Pharmacy, Engineering Technology, 4-Years BS (Physician Assistant) Course, Medicine (MBBS) or BDS.
b) Eligibility for MSc (Microbiology)
Candidates with bachelor's degree under 10+2+3 pattern with minimum 50% marks (aggregate) in graduation i.e. 3yrs Bachelors in Medical/ Biotechnology/ Life Sciences/ Microbiology/Biochemistry or 4yrs Bachelors in Medical Sciences (MBBS, BDS, BAMS, BHMS)/ B.Pharmacy or an equivalent or any relevant higher examination from any recognized University.
c) Eligibility for MSc (Environmental Science)
Candidates with BSc degree from recognized University in any discipline.
7.2 MSc (CHEMISTRY)
Eligibility:
Recognised Bachelors degree in Science of minimum 3 years duration with 50% marks in aggregate and Chemistry as one of the subject at the graduation level and each candidate has to qualify in the entrance test to be conducted by the University.
7.3 MSc (MATHEMATICS AND COMPUTING)
Eligibility:
Recognised Bachelors degree of minimum 3 years duration with 50% marks in aggregate and Mathematics as one of the subject at the graduation level and each candidate has to qualify in the entrance test to be conducted by the University.
7.4 MSc (PHYSICS)
Eligibility:
Recognised Bachelors degree in Science of minimum 3 years duration with 50%
marks in aggregate and Physics as one of the subject at the graduation level and each candidate has to qualify in the entrance test to be conducted by the University.
7.5 No. of seats in each MSc program: 30(Gen-21, SC/ST-8, PH-1) + (5 FN/NRI seats.
Refer section 13 for eligibility & other conditions)
7.6 Mode of Selection: Admission shall be made on the merit of the entrance test to be conducted online by the University across India. The candidates having minimum 20% (15% for SC/ST) in the entrance test shall only be considered for admission.
7.7 ENTRANCE EXAMINATION
A candidate is required to appear in each of the exams separately for which he/she has applied.
Notes:
 The candidates who have applied for programs at 7.1 shall also be eligible for admission to MSc (Biotechnology) course at Shri Mata Vaishno Devi University (SMVDU), Katra on the basis of merit of entrance test to be conducted by Thapar University.
 Each MSc programshall run if minimum of 15 students are admitted in it.
7.5 For all MSc programs: 1% over and above seats are reserved for children of employees of Thapar University. The candidates seeking admission under this category are required to satisfy the eligibility as mentioned above for various MSc programs.
GENERAL INFORMATION REGARDING MSc ENTRANCE TESTS INCLUDING ENTRANCE TEST SYLLABI
I MSc (BIOTECHNOLOGY)/ MSc (MICROBIOLOGY)/ MSc (ENVIRONMENTAL SCIENCE) ENTRANCE TEST
The entrance examination will be of 1.5 hours duration. The question paper shall consist of 75 multiple choice questions divided into two sections viz. Section I, and Section III. All questions will be of Level of B.Sc. (10+2+3).
The entrance paper will constitute four sections in which Section I (Chemistry) is compulsory and Section II is optional containing following units
(a) Maths and Physics;
(b) Biological Sciences; and
(c) Earth Sciences.
The candidates are expected to choose and attempt only one of the Units from Section II.
Each question shall carry 1 mark and 1/4th mark will be deducted for each wrong
answer.
SAMPLE QUESTIONS FOR PAPER
SECTION I: CHEMISTRY (Compulsory)
1. Small drops of water assume spherical shape because
(a) Water having low density (b) Surface tension
(c) Viscosity (d) density
2. Chemical reaction takes place at the anode is
(a) Reduction (b) oxidation
(c) Ionization (d) hydrolysis
3. Which of the following compound will give a hydrocarbon on treatment with Grignard’s reagent?
(a) Ethyl Alcohol (b) Formaldehyde
(c) Acetaldehyde (d) Acetone
4. Which is 2,3-dimethylbutane?
(a) (b)
(c) (d)
SECTION II: BIOLOGY
1. Extra chromosomal DNA is found in
(a) Ribosome’s (b) Lysosomes
(c) Mitochondria (d) Golgi body
2. Sickle cell anemia is caused by
(a) Viral infection of red blood cells (b) amino acid substitution in the
hemoglobin
(c) Excessive diphosphoglycerate (d) deficiency in brain
3. Which of the following peptide hormones is produced by posterior pituitary?
(a) Insulin (b) Glucagon
(c) ACTH (d) Vasopressin
4. Which one of the following is not associated with protein synthesis?
(a) Ribosomes (b) Proteasomes
(c) mRNA (d) tRNA
MATHEMATICS & PHYSICS
1. The resistance that must be placed in parallel with 12 ohms to reduce the combine resistance to 4 ohms is
(a) 6 ohms (b) 16 ohms
(c) 8 ohms (d) 03 ohms
2. If b<d and a=2b and c=-2d then
(a) a<c (b) b=d
(c) a=c (d) a>c
3. If the side of a square is increased by 10% then its area is increased by?
(a) 20% (b) 12%
(c) 121% (d) 21%
4. The equation (x-1)-2/ (x-1)= -2/(x-1) has
(a) One root (b) a double root
(c) No roots (d) a root with a non-zero imaginary part
II Syllabus for MSc (Chemistry) Entrance Examination
Paper will consists of 75 objective type questions. Each question will carry 1 mark and 1/4th mark will be deducted for each wrong/blank answers.
Syllabus
Periodic Table: Periodic classification of elements and periodicity in properties; general properties of s, p, d and f block elements.
Hard and Soft Acids and Bases : Classification of acids and bases as hard and soft. Pearson's HSAB concept, acid-base strength and hardness and softness. Symbiosis, theoretical basis of. hardness and softness, electronegativity and hardness and softness.
Metal-Iigand Bonding in Transition Metal Complexes: Limitations of valence bond theory, an elementary idea of crystal-field theory, crystal field splitting in octahedral, tetrahedral and square planar complexes, factors affecting the crystal-field parameters.
Magnetic Properties of Transition Metal Complexes: Types of magnetic behavior, methods of determining magnetic susceptibility, spin-only formula. L-S coupling, correlation of μs and μeff values, orbital contribution to magnetic moments, application of magnetic moment data for 3d-metal complexes.
Electron Spectra of Transition Metal Complexes: Types of electronic transitions, selection rules for d-d transitions, spectroscopic ground states, spectrochemical series. Orgel-energy level diagram for d1 and d9 states, discussion of the electronic spectrum of [Ti(H2O)6]3+ complex ion.
Thermodynamic and Kinetic Aspects of Metal Complexes: A brief outline of thermodynamic stability of metal complexes and factors affecting the stability, substitution reactions of square planar complexes.
Organometallic Chemistry: Definition, nomenclature and classification of organometallic compounds. Preparation, properties, bonding and applications of alkyls
and aryls of Li, AI, Hg, Sn and Ti, metal-ethylenic complexes and homogeneous hydrogenation, mononuclear carbonyls and the nature of bonding in metal carbonyls. Organomagnesium compounds: the Grignard reagents - formation, structure and chemical reactions. Organozinc compounds: formation and chemical reactions.
Spectroscopy: Electromagnetic radiation, regions of the spectrum, basic features of different spectrometers, statement of the Born-Oppenheimer approximation, degrees of freedom.
UV-Visible Spectroscopy: Beer-Lambert’s law, molar absorptivity, presentation and analysis of UV spectra, types of electronic transitions, effect of conjugation. Concept of chromophore and auxochrome. Bathochromic, hypsochromic, hyperchromic and hypochromic shifts. UV spectra of conjugated enes and enones.
Infrared absorption spectroscopy: molecular vibrations, Hooke's law, selection rules, intensity and position of IR bands, measurement of IR spectrum, fingerprint region characteristic absorptions of various functional groups and interpretation of IR spectra of simple organic compounds.
Nuclear magnetic resonance (NMR) spectroscopy: 1H NMR spectroscopy, nuclear shielding and deshielding, chemical shift and molecular structure, spin-spin splitting and coupling constants, areas of signals, interpretation of PMR spectra of simple organic molecules.
Problems pertaining to the structure elucidation of simple organic compounds using UV, IR and PMR spectroscopic techniques.
Stereochemistry of Organic Compounds: Concept of isomerism. Types of isomerism, Optical isomerism - elements of symmetry, molecular chirality, enantiomers, stereogenic centre, optical activity, properties of enantiomers, chiral and achiral molecules with two stereogenic centres, diastereomers, threo and erythro diastereomers, meso compounds, resolution of enantiomers, inversion, retention and racemization. Relative and absolute configuration, sequence rules, D & L and R & S systems of nomenclature. Geometric isomerism - determination of configuration of geometric isomers. E & Z system of nomenclature, geometric isomerism in oximes and alicyclic compounds. Conformational isomerism - conformational analysis of ethane and n-butane, conformations of cyclohexane, axial and equatorial bonds, conformation of mono substituted cyclohexane derivatives. Newman projection and Sawhorse formulae, Fischer and flying wedge formulae.
Heterocyclic Compounds: Introduction: Molecular orbital picture and aromatic characteristics of pyrrole, furan, thiophene and pyridine. Synthesis, properties and chemical reactions with particular emphasis on the mechanism of electrophilic substitution. Mechanism of nucleophilic substitution reactions in pyridine derivatives. Preparation and reactions of indole, quinoline and isoquinoline with special reference to Fisher indole synthesis, Skraup synthesis and Bischler-Napieralski synthesis. Mechanism of electrophilic substitution reactions of indole, quinoline and isoquinoline.
Organic Synthesis via Enolates: Acidity of -hydrogens, alkylation of diethyl malonate and ethyl acetoacetate. Synthesis of ethyl acetoacetate: the Claisen condensation. Keto-enol tautomerism of ethyl acetoacetate. Alkylation of 1,3-dithianes. Alkylation and acylation of enamines.
Carbohydrates: Classification and nomenclature. Monosaccharides, mechanism of osazone formation, interconversion of glucose and fructose, chain lengthening and chain shortening of aldoses. Configuration of monosaccharides. Erythro and threo diastereomers. Conversion of glucose into mannose. Formation of glycosides, ethers and esters. Determination of ring size of monosaccharides. Cyclic structure of D-(+)-glucose. Mechanism of mutarotation. Structures of ribose and deoxyribose.
Amino Acids, Peptides, Proteins and Nucleic Acids: Classification, structure and stereochemistry of amino acids. Acid-base behavior, isoelectric point and
electrophoresis. Preparation and reactions of -amino acids. Structure and nomenclature of peptides and proteins. Classification of proteins. Peptide structure determination, and group analysis, selective hydrolysis of peptides. Classical peptide synthesis, solid-phase peptide synthesis. Structures of peptides and proteins. Levels of protein structure. Protein denaturation/renaturation. Nucleic acids: introduction. Constituents of nucleic acids. Ribonucleosides and ribonucleotides. The double helical structure of DNA.
Synthetic Polymers: Addition or chain-growth polymerization. Free radical vinyl polymerization, ionic vinyl polymerization, Ziegler-Natta polymerization. Polyesters, polyamides, phenol formaldehyde resins, urea formaldehyde resins, epoxy resins and polyurethanes. Natural and synthetic rubbers.
Atomic Structure: De Broglie hypothesis, the Heisenberg's uncertainty principle, Significance of  and 2, quantum numbers, Schrödinger wave equation and its importance, physical interpretation of the wave function. Hund’s rule and electronic configuration of elements.
Photochemistry: Interaction of radiation with matter, difference between thermal and photochemical processes. Laws of photochemistry: Grothus - Drapper law, Stark - Einstein law, Jablonski diagram, fluorescence, phosphorescence, non-radiative processes, quantum yield, photosensitized reactions – energy transfer processes.
Solutions, Dilute Solutions and Colligative Properties: Ideal and non-ideal solutions, methods of expressing concentrations of solutions, activity and activity coefficient. Dilute solution, colligative properties, Raoult's law, relative lowering of vapour pressure, molecular weight determination. Osmosis, law of osmotic pressure and its measurement, determination of molecular weight from osmotic pressure. Elevation of boiling point and depression of freezing point,
Chemical Thermodynamics: Reversible and irreversible processes; First law and its application to ideal and nonideal gases; Thermochemistry ; Second law; Entropy and free energy, Criteria for spontaneity. Chemical and Phase Equilibria: Law of mass action; Kp , Kc, Kx and Kn ; Effect of temperature on K; Ionic equilibria in solutions; pH and buffer solutions; Hydrolysis; Solubility product; Phase equilibria–Phase rule and its application to one-component and two-component systems; Colligative properties. Electrochemistry: Conductance and its applications; Transport number; Galvanic cells; EMF and Free energy; Concentration cells with and without transport. Chemical Kinetics: Reactions of various order, Arrhenius equation, Collision theory; Theory of absolute reaction rate; Chain reactions – Normal and branched chain reactions; Photophysical and photochemical processes; Catalysis.
III Syllabus for MSc (Mathematics and Computing) Entrance Examination
Paper will consists of 75 objective type questions. Each question will carry 1 mark and 1/4th mark will be deducted for wrong/blank answers.
Syllabus
Algebra: Set theory, Relations, Mapping and its applications, Permutations and combinations, Types of matrices, Rank and inverse of a matrix, Linear independence and linear dependence, Solution of system of linear equations, Eigen values and Eigen vectors of a matrix, Cayley Hamilton theorem.
Calculus: Limits, Continuity and Differentiability, Rolle’s and Mean value theorems, Successive differentiation, Partial differentiation, Maxima and Minima of function of one and two variables, Maclaurin’s and Taylor’s theorem for functions of one and two variables, Definite integral and its applications, Beta and gamma function, Double integral and its applications, Laplace and inverse Laplace transform and their properties, Convolution theorem.
Differential Equation: Ordinary differential equations of first order and their solutions, Linear differential equations of higher order with constant coefficients, Classification of partial differential equations, Partial differential equations of first order, Lagrange’s solution, Charpit’s method.
Analysis: Riemann integral, Integrability of continuous and monotonic functions, Mean value theorems of integral calculus, Infinite series and their convergence, Demoivre’s theorem and its applications, Functions of complex variables, Analytic function, C-R equations.
Abstract Algebra: Groups, Subgroups and their properties, Lagrange’s theorem, Rings, Subrings, Integral domain and Field, Vector spaces, Subspaces and their properties, Inner product spaces, Orthogonal vectors.
Numerical Analysis: Solution of non linear equations using iterative methods, Interpolation for equally and unequally spaced data, Trapezoidal and Simpson’s rules for integration.
Statistics, Probability and Linear Programming: Measures of central tendency, Dispersion, Skewness and kurtosis, Correlation and regression, Basic concepts of probability, Conditional probability, Baye’s theorem, Discrete and continuous distributions ( Binomial , Poisson and Normal), Fundamentals of linear programming problems, Graphical solution, Simplex method and its variants.
Computing Fundamentals: Organization of a computer, Central processing unit(CPU), Input/Output devices, Computer memory, Memory organization, Back-up devices, Representation of character, integers and fractions, Binary and hexadecimal representation, Binary arithmetic: addition, subtraction, division and multiplication, Floating point representation of numbers, Normalized floating point representation.
MODEL QUESTIONS
1. A root of the equation 0
3 3 6
6 3 3
3 6 3

 
 
 
x
x
x
is
(A) 6 (B) 3 (C) 0 (D) -3
2. Which statement characterizes standard form of a linear programming
problem?
(A) Constraints are given by inequalities of any type
(B) Constraints are given by a set of linear equations
(C) Constraints are given only by inequalities of >= type
(D) Constraints are given only by inequalities of <= type
3. The coefficient of correlation
(A) Cannot be negative (B) Cannot be positive
(C) Is always positive (D) Can be positive as well as negative
4. If the two regression coefficients are b1 and b2 then the correlation
coefficient is
(A)
2
1
b
b
(B) 1 2 b b
(C) 1 2 b b (D)
1
2
b
b
5. Machine language instructions are executed in a part of the computer
called:
(A) Arithmetic/logic unit (B) Video display unit
(C) Volatile memory (D) Central processing unit
6. The process of writing the computer instructions is called
(A) Coding (C) Debugging
(B) Compiling (D) Interpreting
IV Syllabus for MSc (Physics) Entrance Examination
Paper will consists of 75 objective type questions. Each question will carry 1 mark and
1/4th mark will be deducted for wrong/blank answers.
Syllabus:
1. Mechanics and Waves
Newton's laws of motion and applications, variable mass systems, projectiles. Rotational
dynamics-kinetic energy, angular momentum, theorems of moment of intertia.
Conservative forces, frictional forces. Gravitaional potential and intensity due to
spherical objects. Central forces, Kepler's problem, escape velocity and artificial
satellites. Streamline motion, viscosity, Applications of Bernoulli's equation and Stokes'
law. Special relativity, length contraction, time dilation, mass-energy relation. Simple
harmonic motion, Lissajous figures. Damped oscillation, forced oscillation and resonance. Beats, Phase and group velocities. longitudinal waves in solids. Doppler effect, Ultrasonic and their applications.
2.Geometrical and Physical Optics.
Laws of reflection and refraction from Fermat's principle. Matrix method in paraxial optics- thin lens formula, nodal planes, system of two thin lenses. Chromatic and spherical aberrations. Huygens' principle-reflection and refraction of waves. Interference of light-Young's experiment, Newton's rings, interference by thin films, Michelson interferometer. Fraunhofer diffraction-single slit, double slit, diffraction grating, resolving power. Production and detection of linearly, circularly and elliptically polarised light. Double refraction, quarter-waves plates and half-wave plates. Optical activity and applications. Elements of fibre optics-attenuation; pulse dispersion in step index and parabolic index fibres; material dispersion. Lasers, characteristics of laser light-spatial and temporal coherence.
3. Heat and Thermodnamics
Thermal equilibrium and temperature. The zeroth law of thermodynamics. Heat and the first law of thermodynamics. Efficiency of Carnot engines. Entropy and the second law of thermodynamics. Kinetic theory and the equation of state of an ideal gas. Mean free path, distribution of molecular speeds and energies. Trasport phenomena. Andrew's experiements-van der Waals equation and applications. Joule-Kelvin effect and applications. Brownian motion. Thermodynamic potentials-Maxwell relations. Phase transitions. Kirchhoff's laws. Black-body radiation-Stefan-Boltzmann law, spectral radiancy, Wien displacement law, application to the cosmic microwave background radiation, Planck radiation law.
4. Electricity and Magnetism
Electric charge, Coulomb's law, electric field, Gauss' law. Electric potential, van de Graff accelerator. Capacitors, dielectrics and polarization. Ohm's law, Kirchhoff's first and second rules, resistors in series and parallel, applications to two-loop circuits. Magnietic field-Gauss'law for magnetism, atomic and nuclear magnetism, magnetic susceptibility, classification of magnetic materials. Cirulating charges, cyclotron, synchrotron. Hall effect. Biot-Savart law, Ampere's law, Faraday's law of induction., Lenz's law. Inductance. Alternating current circuits-RC, LR, single-loop LRC circuits, impedance, resonance, power in AC circuits.
Displacement current, Maxwell's equations.
5. Atomic and Nuclear Physics
Photoelectric effect, Einstein's photon theory. Bohr's theory of hydrogen atom. Stern-Gerlach experiment, quantisation of angular momentum, electron spin. Pauli exclusion principle and applications. Zeeman effect. X-ray spectrum. Compton effect, Compton wavelength. Wave nature of matter, de Broglie wavelength, wave-particle duality. Heisenberg's uncertainty relationships. Schroedinger's equation-eigenvalues and eigenfunctions of (i) particle in a box, (ii) simple harmonic oscillator and (iii) hydrogen atom. Natural and artificial radioactivity. Binding energy of nuclei, nuclear fission and fusion. Classification of elementary particles.
6. Solid State Physics
Crystal structure, x-ray diffraction, Bragg’s law, Bonding, covalent, ionic, metallic, Van der Walls bonding,
Magnetism, Dia, Para and Ferromagnetism, Hysteresis. Thermal properties, lattice vibrations, Debye model.
Band structure, energy band, energy gap, metals, insulators and semiconductors.
7. Electronics
Diodes in half-waves and full-wave rectification, qualitative ideas of semiconductors, p type and n type semiconductors, junction diode, Zener diode, transistors, Field Effect transistor. Binary numbers, Logic gates and truth table.
Sample Questions:
1. The minimum value of angular momentum by coupling three angular momenta 1, 3/2 and 5/2 is
(a) -5 (b) 0.5 (c) 0 (d) 1
2. The mechanical equivalence of an LCR series circuit with voltage
source is a
(a) damped harmonic oscillator (b) forced harmonic oscillator
(c) free linear harmonic oscillator (d) damped and forced harmonic oscillator
Note: There will be negative marking for wrong answers. Penalty for wrong answers will be adopted as under :
The total marks to be awarded to a candidate in a paper after imposing the penalty will be calculated by the following formula (assuming that each question carries 1 mark).
For each correct answer to a question, one mark will be awarded. However, if the answer is wrong 1/4 mark will be deducted. For examples this will be computed as under.
Let R = number of correct answers
W = number of wrong answers
U = number of Unattempted questions
T = total number of questions
Then the total marks obtained is R-1/4W. Calculated to the second place of decimal, the examiner will also check that T = R + W + U = T
8. ADMISSION TO DUAL DEGREE BCA-MCA PROGRAMS (REGULAR)
TU offers dual degree BCA-MCA programs of five years duration (10 Semesters):
8.1 BCA-MCA program (Regular Mode)
Eligibility:
10+2 or equivalent examination with at least 60% marks in aggregate of any three of the subjects namely Physics, Mathematics, Chemistry and Biology.
Mode of Admission:
Admission shall be made on the basis of merit of the entrance test to be conducted online by the University across India. The candidates having minimum 20% (15% for SC/ST) in the entrance test shall only be considered for admission.
Note: The program shall run only if minimum 10 students are admitted.
No. of Seats: 30 (Gen-21, SC/ST-8, PH-1)+ 5 FN/NRI seats. Refer section 13 for eligibility & other conditions.
In addition to above seats, 1% over and above seats are reserved for children of employees of Thapar University. The candidates seeking admission under this category are required to satisfy the eligibility as mentioned above for General candidates.
Salient features of the Programme:
i) Unique in India.
ii) To provide a platform for interdisciplinary courses of Computer Science
and Engineering.
iii) To bring the young minds in the area of Computer Applications.
iv) To give an Exit option after 3 years with degree of BCA
v) To give an option to medical background students to enter into field of Computer Applications
Entrance Examination
The question paper will have four sections and will include questions on (1) biology (2) mental ability (3) mathematics and (4) physics. Sections of mental ability and physics are compulsory to attempt whereas Candidates may opt one out of mathematics OR biology. All sections carry equal marks. The questions will be of objective type with four answers given for each question. Wrong answers will be awarded negative marks. Duration of the paper will be 1.5 hours consisting of 75 questions.
The syllabus for the entrance examination is given below:
Mathematics (25 questions)
Algebra:
Algebra of complex numbers, addition, multiplication, conjugation, polar representation, properties of modulus and principal argument, triangle inequality, cube roots of unity, geometric interpretations.
Sets and their Representations, Union, intersection and complements of sets,
and their algebraic properties, Relations, equivalence relations, mappings, one- one,
into and onto mappings, composition of mappings.
Quadratic equations with real coefficients, relations between roots and coefficients, formation of quadratic equations with given roots, symmetric functions of roots.
Arithmetic, geometric and harmonic progressions, arithmetic, geometric and harmonic means, sums of finite arithmetic and geometric progressions, infinite geometric series, sums of squares and cubes of the first n natural numbers. Logarithms and their properties.
Permutations and combinations, Binomial theorem for a positive integral index, properties of binomial coefficients.
Matrices as a rectangular array of real numbers, equality of matrices, addition, multiplication by a scalar and product of matrices, transpose of a matrix, determinant of a square matrix of order up to three, inverse of a square matrix of order up to three, properties of these matrix operations, diagonal, symmetric and skew-symmetric matrices and their properties, solutions of simultaneous linear equations in two or three variables.
Analytical geometry:
Two Dimensions:
Cartesian coordinates, distance between two points, section formulae, shift of origin. Equation of a straight line in various forms, angle between two lines, distance of a point from a line; Lines through the point of intersection of two given lines, equation of the bisector of the angle between two lines, concurrency of lines; Centroid, orthocentre, incentre and circumcentre of a triangle. Equation of a circle in various forms, equations of tangent, normal and chord. Parametric equations of a circle, intersection of a circle with a straig ht line or a circle, equation of a circle through the points of intersection of two circles and those of a circle and a straight line. Equations of a parabola, ellipse and hyperbola in standard form, their foci, directrices and eccentricity, parametric equations, equations of tangent and normal.
Three Dimensions:
Direction cosines and direction ratios, equation of a straight line in space, equation of a plane, distance of a point from a plane.
Differential Calculus:
Limit and continuity of a function, limit and continuity of the sum, difference, product and quotient of two functions, L’Hospital rule of evaluation of limits of functions. Even and odd functions, inverse of a function, continuity of composite functions, intermediate value property of continuous functions. Derivative of a function, derivative of the sum, difference, product and quotient of two functions, chain rule, derivatives of polynomial, rational, trigonometric, inverse trigonometric, exponential and logarithmic functions. Derivatives of implicit functions, derivatives up to order two, geometrical interpretation of the derivative, tangents and normals, increasing and decreasing functions, maximum and minimum values of a function, Rolle’s Theorem and Lagrange’s Mean Value Theorem.
Integral Calculus:
Integration as the inverse process of differentiation, indefinite integrals of standard functions, definite integrals and their properties, Fundamental Theorem of Integral Calculus. Integration by parts, integration by the methods of substitution and partial fractions, application of definite integrals to the determination of areas involving simple curves.
Differential equations:
Formation of ordinary differential equations, solution of homogeneous differential equations, separation of variables method, linear first order differential equations.
Statistics and Probability:
Measures of Central Tendency and Dispersion: Calculation of mean, median, mode of grouped and ungrouped data. Calculation of standard deviation, variance and mean deviation for grouped and ungrouped data. Addition and multiplication rules of probability, conditional probability, Bayes Theorem, independence of events, computation of probability of events using permutations and combinations.
MATHEMATICAL REASONING:
Statements, logical operations and, or, implies, implied by, if and only if. Understanding of tautology, contradiction, converse and contrapositive.
PHYSICS (25 questions)
PHYSICS AND MEASUREMENT :
Physics, technology and society, S I units, Fundamental and derived units. Least count, accuracy and precision of measuring instruments, Errors in measurement, Significant figures. Dimensions of Physical quantities, dimensional analysis and its applications. KINEMATICS:
Frame of reference. Motion in a straight line: Position-time graph, speed and velocity. Uniform and non-uniform motion, average speed and instantaneous velocity Uniformly accelerated motion, velocity-time, position- time graphs, relations for uniformly accelerated motion. Scalars and Vectors, Vector addition and Subtraction, Zero Vector, Scalar and Vector products, Unit Vector, Dot and Cross product of two vectors ,Scalar Triple Products and their geometrical interpretation, Resolution of a Vector. Relative Velocity, Motion in a plane, Projectile Motion, Uniform Circular Motion.
OSCILLATIONS AND WAVES :
Periodic motion – period, frequency, displacement as a function of time. Periodic functions. Simple harmonic motion (S.H.M.) and its equation; phase; oscillations of a spring -restoring force and force constant; energy in S.H.M. – kinetic and potential energies; Simple pendulum – derivation of expression for its time period; Free, forced and damped oscillations, resonance. Wave motion. Longitudinal and transverse waves, speed of a wave. Displacement relation for a progressive wave. Principle of superposition of waves, reflection of waves, Standing waves in strings and organ pipes, fundamental mode and harmonics, Beats, Doppler effect in sound.
ELECTROSTATICS:
Electric charges: Conservation of charge, Coulomb’s law-forces between two point charges, forces between multiple charges; superposition principle and continuous charge distribution.
Conductors and insulators, Dielectrics and electric polarization, capacitor, combination of capacitors in series and in parallel, capacitance of a parallel plate capacitor with and without dielectric medium between the plates, Energy stored in a capacitor.
CURRRENT ELECTRICITY:
Electric current, Drift velocity, Ohm’s law, Electrical resistance, Resistances of different materials, V-I characteristics of Ohmic and nonohmic conductors, Electrical energy and power, Electrical resistivity, Colour code for resistors; Series and parallel combinations of resistors; Temperature dependence of resistance.
OPTICS:
Reflection and refraction of light at plane and spherical surfaces, mirror formula, Total internal reflection and its applications, Deviation and Dispersion of light by a prism, Lens Formula, Magnification, Power of a Lens,
ELECTRONIC DEVICES:
Semiconductors; semiconductor diode: I-V characteristics in forward and reverse bias; diode as a rectifier; I-V characteristics of LED, photodiode, solar cell and Zener diode; Zener diode as a voltage regulator. Junction transistor, transistor action, characteristics of a transistor; transistor as an amplifier (common emitter configuration) and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.
COMMUNICATION SYSTEMS:
Propagation of electromagnetic waves in the atmosphere; Sky and space wave propagation, Need for modulation, Amplitude and Frequency Modulation, Bandwidth of signals, Bandwidth of Transmission medium, Basic Elements of a Communication System (Block Diagram only)
Analytical Ability(25 Questions)
The questions in this section will cover, quantitative reasoning, Data interpretation and Logical reasoning
Quantitative Reasoning:
Arithmetic Ratios and Proportion, Ratios, Percentages, Profit & Loss, Averages, Partnership, Time-Speed-Distance, Work and time, Number system, HCF, LCM, Number Base System, BODMAS,Alligation & Mixtures, Work, Pipes and Cisterns, Simple Interest & Compound Interest, Installment Payments, Clocks, Calendar.
Algebra
Set Theory, Venn Diagram, Quadratic and linear equations
Mensuration and solid Geometry (Lines, angles, Triangles, Spheres, Rectangles, cube, etc.
Data interpretation
Data Interpretation based on text, Data Interpretation based on graphs and tables. Graphs can be Column graphs, Bar Graphs, Line charts, Pie Chart, Graphs representing Area.
Logical Reasoning
Critical reasoning, Visual reasoning, Assumption-Premise-Conclusion, Assertion and reasons, Statements and assumptions, identifying valid inferences, Statements and conclusions, Cause and Effect, Identifying Probably true, Probably false, definitely true, definitely false kind of statement, Symbol Based problems, Coding and decoding , Sequencing , identifying next number in series etc.
Biology (25 questions)
Cell Biology: Cell theory Cell as a unit of life. Tools and techniques of cell studies – Microscopy, Biomembranes -Transport mechanism, cellular respiration, Cell organelles: their structure and functions. Structure of DNA, replication, transcription and translation, principles of the basic techniques in molecular biology.
Zoology: Anatomy and Physiology: Digestive System, Respiratory System, Circulatory System, Excretory System, Nervous System, Sense organs, Reproductive System, Developmental Biology. Diversity of Animal Life: Principles of Classification, animal phyla up to classes (invertebrates) and upto sub-classes/order (vertebrates), Genetics and Evolution,
Mitosis and Meiosis, Mendel’s laws of inheritance, Ecology: Physical and biological factors influencing organisms. Food chains, pyramids of numbers and biomass, biological equilibrium. Interspecific associations.
Botany: Meristems -Plant growth and development. Internal and external regulators of growth and development in plants, internal structure of root, stem, secondary growth and
leaves; Xylem and Phloem-their cell elements and functions: Internal structure of dicot and monocot leaves; photosynthesis, history, importance, factors and mechanism, stomatal mechanism, transpiration and respiration. Absorption and cell-water relations, transport of water and minerals, tropic and turgor movements. Significance of life-cycles with special reference to alternation of generations as exemplified in Funaria, Selaginella and Pinus (No structural details). Systematics: Principles of classical and new systematics. Familiarity with taxa, Environmental pollution and preventive measures
CHEMISTRY (25 questions)
Physical Chemistry
General topics: Concept of atoms and molecules; Dalton’s atomic theory; Mole concept; Chemical formulae; Balanced chemical equations; Calculations (based on mole concept) involving common oxidation-reduction, neutralisation, and displacement reactions; Concentration in terms of mole fraction, molarity, molality and normality.
Gaseous and liquid states: Absolute scale of temperature, ideal gas equation; Deviation from ideality, van der Waals equation; Kinetic theory of gases, average, root mean square and most probable velocities and their relation with temperature; Law of partial pressures; Vapour pressure; Diffusion of gases.
Atomic structure and chemical bonding: Bohr model, spectrum of hydrogen atom, quantum numbers; Wave-particle duality, de Broglie hypothesis; Uncertainty principle; shapes of s, p and d orbitals; Electronic configurations of elements (up to atomic number 30); Aufbau principle; Pauli’s exclusion principle and Hund’s rule; Hybridisation involving s, p and d orbitals only; VSEPR model and shapes of molecules.
Thermodynamics: Laws of thermodynamics, Internal energy, work and heat, Entropy, Enthalpy, Hess’s law; Heat of reaction.
Chemical equilibrium: Law of mass action; Equilibrium constant, Le Chatelier’s principle (effect of concentration, temperature and pressure); Significance of G and Go in chemical equilibrium; Solubility product, common ion effect, pH and buffer solutions; Acids and bases (Bronsted and Lewis concepts); Hydrolysis of salts.
Electrochemistry: Standard electrode potentials; Nernst equation and its relation to G; Electrochemical series, emf of galvanic cells; Faraday’s laws of electrolysis; Electrolytic conductance, specific, equivalent and molar conductivity, Kohlrausch’s law.
Chemical kinetics: Rates of chemical reactions; Order of reactions; Rate constant; First order reactions; Temperature dependence of rate constant (Arrhenius equation).
Solutions: Raoult’s law; Molecular weight determination from lowering of vapour pressure, elevation of boiling point and depression of freezing point.
Inorganic Chemistry
Periodicity and general trends in periodic table
Study of s and p block elements: Extraction, preparation, properties and reactions.
Transition elements (3d series): Definition, general characteristics, variable oxidation states and their stabilities, colour (excluding the details of electronic transitions) and calculation of spin-only magnetic moment.
Coordination compounds: Nomenclature of mononuclear coordination compounds, cis-trans and ionization isomerisms, hybridization and geometries of mononuclear coordination compounds (linear, tetrahedral, square planar and octahedral).
Metals and metallurgy: General methods involving chemical principles, General operation stages involved in metallurgical operation, Metallurgy of p-block element (emphasis on Al), Metallurgy of Fe-triad (Fe, Co, and Ni with more emphasis on Fe metallurgy), Metallurgy of coinage metals.
Organic Chemistry
Concepts: Hybridisation of carbon; Sigma and pi-bonds; Shapes of simple organic molecules; Structural and geometrical isomerism; Optical isomerism of compounds containing up to two asymmetric centres (R, S and E, Z nomenclature excluded); IUPAC nomenclature of simple organic compounds (only hydrocarbons, mono-functional and bi-functional compounds); Conformations of ethane and butane (Newman projections); Resonance and hyperconjugation; Keto-enol tautomerism; Inductive and resonance effects; Reactive intermediates; Formation, structure and stability of carbocations, carbanions and free radicals.
Preparation, properties and reactions of alkanes, alkenes and alkynes: Physical properties of alkanes, alkenes and alkynes; Acidity of alkynes; Acid catalysed hydration of alkenes and alkynes (excluding the stereochemistry of addition and elimination); Reactions of alkenes with KMnO4 and ozone; Reduction of alkenes and alkynes; Preparation of alkenes and alkynes by elimination reactions; Electrophilic addition reactions of alkenes with X2, HX, HOX and H2O (X=halogen); Addition reactions of alkynes.
Reactions of benzene: Structure and aromaticity; Electrophilic substitution reactions: halogenation, nitration, sulphonation, Friedel-Crafts alkylation and acylation.
Reactions of Phenols: Acidity, electrophilic substitution reactions (halogenation, nitration and sulphonation); Reimer-Tieman reaction, Alkyl halides: Grignard reactions, nucleophilic substitution reactions, Alcohols: esterification, dehydration and oxidation, conversion of alcohols into aldehydes and ketones, Ethers: Preparation by Williamson’s Synthesis, Aldehydes and Ketones: oxidation, reduction, oxime and hydrazone formation; aldol condensation, Perkin reaction; Cannizzaro reaction, Carboxylic acids: formation of esters, acid chlorides and amides, ester hydrolysis, Amines: basicity of substituted anilines and aliphatic amines, preparation from nitro compounds, reaction with nitrous acid.
Carbohydrates: Classification; mono- and di- saccharides (glucose and sucrose); Oxidation, reduction.
Amino acids and peptides: General structure (only primary structure for peptides) and physical properties.
9. POST GRADUATE DIPLOMA IN PLANT TRANSGENIC TECHNOLOGIES :
This program shall be offered by the Department of Biotechnology and Environmental Sciences.
9.1 DURATION OF THE PROGRAMME: One year (two semesters)
9.2 MODE OF SELECTION : Admission will be made on the Merit of the Entrance Test only. Duration of test shall be 90 minutes (75 Questions). 1/4th marks shall be deducted for every wrong answer.
9.3 NO. OF SEATS: 20(Gen-14, SC/ST-5, PH-1)+ 3 FN/NRI seats. Refer section 13 for eligibility & other conditions.
.
9.4 Eligibility criterion:
MSc Degree in Biology/ Botany/ Biochemistry/ Biotechnology/ Microbiology/ Zoology/ Genetics.
9.5 Syllabus for Entrance Examination:
Microbiology: Prokaryotic and eukaryotic cell structure; Microbial nutrition, growth and control; Microbial metabolism (aerobic and anaerobic respiration, photosynthesis); Nitrogen fixation; Chemical basis of mutations and mutagens; Microbial genetics (plasmids, transformation, transduction, conjugation); Microbial diversity and characteristic features; Viruses.
Biochemistry: Biomolecules and their conformation; Ramachandran map; Weak inter-molecular interactions in biomacromolecules; Chemical and functional nature of enzymes; Kinetics of single substrate and bi-substrate enzyme catalyzed reactions; Bioenergetics; Metabolism (Glycolysis, TCA and Oxidative phosphorylation); Membrane
transport and pumps; Cell cycle and cell growth control; Cell signaling and signal transduction; Biochemical and biophysical techniques for macromolecular analysis
Molecular Biology and Genetics: Molecular structure of genes and chromosomes; DNA replication and control; Transcription and its control; Translational processes; Regulatory controls in prokaryotes and eukaryotes; Mendelian inheritance; Gene interaction; Complementation; Linkage, recombination and chromosome mapping; Extrachromosomal inheritance; Chromosomal variation; Population genetics; Transposable elements, Molecular basis of genetic diseases and applications
Plant and Animal Biotechnology: Special features and organization of plant cells; Totipotency; Regeneration of plants; Plant products of industrial importance; Biochemistry of major metabolic pathways and products; Autotrophic and heterotrophic growth; Plant growth regulators and elicitors; Cell suspension culture development: methodology, kinetics of growth and production formation, nutrient optimization; Production of secondary metabolites by plant suspension cultures; Hairy root cultures and their cultivation. Techniques in raising transgencies.
Immunology: The origin of immunology; Inherent immunity; Humoral and cell mediated immunity; Primary and secondary lymphoid organ; Antigen; B and T cells and Macrophages; Major histocompatibility complex (MHC); Antigen processing and presentation; Synthesis of antibody and secretion; Molecular basis of antibody diversity; Polyclonal and monoclonal antibody; Complement; Antigen-antibody reaction; Regulation of immune response; Immune tolerance; Hyper sensitivity; Autoimmunity; Graft versus host reaction.
Recombinant DNA Technology: Restriction and modification enzymes; Vectors: plasmid, bacteriophage and other viral vectors, cosmids, Ti plasmid, yeast artificial chromosome; cDNA and genomic DNA library; Gene isolation; Gene cloning; Expression of cloned gene; Transposons and gene targeting; DNA labeling; DNA sequencing; Polymerase chain reactions; DNA fingerprinting; Southern and northern blotting; In-situ hybridization; RAPD; RFLP; Site directed mutagenesis; Gene transfer technologies; Gene therapy.
Plant Sciences: Plant cell structure, organization, organelles, cytoskeleton, cell wall and membranes; anatomy of root, stem and leaves, meristems, vascular system, their ontogeny,structure and functions, secondary growth in plants and stellar organization; Plant water relations, transport of minerals and solutes, stress physiology, stomatal physiology, signal transduction, N2 metabolism, photosynthesis, photorespiration; respiration ; Flowering: photoperiodism and vernalization, biochemical mechanisms involved in flowering; molecular mechanism of senencensce and aging, biosynthesis, mechanism of action and physiological effects of plant growth regulators, Principles of Mendelian inheritance and linkage. Principles, methods - selection, hybridization, heterosis; male sterility, genetic maps and molecular markers, sporophytic and gametophytic self incompability, haploidy, triploidy, somatic cell hybridization, A general account of economically and medicinally important plants; Nature and classification of plant diseases; plant-microbe beneficial interactions diseases of important crops caused by fungi, bacteria and viruses, and their control measures, mechanism(s) of pathogenesis and resistance, molecular detection of pathogens; Ecosystems - types, dynamics, degradation, ecological succession; food chains and energy flow.
Animal Sciences: Broad classification of Animals, Origin and history of life on earth, theories of evolution, natural selection, adaptation, Speciation, Comparative physiology, the respiratory system, circulatory system, digestive system, the nervous system, the excretory system, the endocrine system, the reproductive system, the skeletal system, osmoregulation Nature of parasite, host-parasite relation Embryonic development, cellular differentiation, organogenesis, metamorphosis, genetic basis of development, stem cells. Metabolism, regulation and nutritional requirements for mass
cultivation of animal cell cultures; Kinetics of cell growth and product formation and effect of shear force; Product and substrate transport; Micro & macro-carrier culture; Hybridoma technology; Live stock improvement; Cloning in animals; Genetic engineering in animal cell culture; Animal cell preservation.
COURSE STRUCTURE
Semester I
Sr. No.
Course No.
Course Title
L
T
P
Cr
1
PDB101
Plant Tissue Culture and its Applications
3
0
3
4.5
2
PDB102
Plant Molecular Biology
3
0
3
4.5
3
PDB103
Plant Genetic Engineering
3
0
3
4.5
4
PDB104
Bio-Techniques
3
0
2
4.0
5
PHU301
Entrepreneurship and IPR
3
1
0
3.5
Total
15
1
11
21.0
Semester II
Sr. No.
Course No.
Course Title
L
T
P
Cr
1
PDB201
Plant Genomics, Proteomics, & Bioinformatics
3
0
2
4.0
2
PDB202
Molecular Farming
3
0
2
4.0
3
PDB203
Seminar
0
0
0
2.0
4
PDB204
Project work
0
0
0
8.0
Total
6
2
2
18.0
10. Admission to ME/MTech PROGRAMME
Mode of Program
 Regular
 Part time
10.1 ELIGIBILITY FOR ADMISSION
ELIGIBILITY FOR ADMISSION
Admission to all the ME/MTech programmes shall be made on the basis of valid GATE Score in respective discipline. First preference will be given to GATE qualified candidates. After offering seats to the GATE qualified candidates, for seats remaining vacant (if any), the admission will be made on the merit of the entrance test to be conducted by the University across India and only those candidates who shall be having minimum 20% (15% for SC/ST) in the entrance test shall only be considered for admission.
Admission to ME/MTech programme will be open to a candidate who obtains at least 50% marks in the aggregate in the qualifying examination from a recognised University.
Note: For ME (Computer Science and Engineering, Software Engineering, Electronics and Communication) and MTech (Computer Applications), only GATE qualified candidates shall be admitted. Non-GATE candidates are advised not to apply for these programs.
However, Non-GATE candidates can apply for these programs in part time mode.
Qualifying examination for ME/MTech programme (regular as well as part-time) in various disciplines is as under:
ME Programmes
CAD/CAM Engineering
BE/BTech degree in Mechanical/Production/Industrial Engineering.
Structural Engineering
BE/BTech degree in Civil Engineering.
Civil (Infrastructure) Engineering
BE / BTech in Civil Engineering, BE/ BTech in Infrastructure Engineering
Electronics & Communications Engineering#
BE/BTech degree in Electronics & Communication
Wireless Communications#
B.E / B.Tech or equivalent, Applied Electronics & Telecommunication / Electronics Telecommunication / Telecommunication Engineering / Electronics & Telematics / Electronics and Communication Engineering / Electrical and Electronics
# Gate Qualified candidates with BE/BTech in Electronics and Communication shall only be considered for admission on the basis of GATE score
Production Engineering
BE/BTech degree in Mechanical/Production/Industrial/Automobile Engineering.
Software Engineering*
BE/Btech degree in any discipline of Engineering OR MSc in Mathematics/Statistics/Computer Science/ Electronics/Physics/Operations Research/Information Science/Information Technology OR MCA OR Equivalent
Computer Science & Engineering*
BE/Btech degree in any discipline of Engineering OR MSc in Mathematics/Statistics/Computer Science/ Electronics/Physics/Operations Research/Information Science/Information Technology OR MCA OR Equivalent
Information Security*
BE/BTech degree in any discipline of Engineering OR MSc in Mathematics/ Statistics/ Computer Science/ Electronics/ Physics/ Operations Research/ Information Science/ Information technology OR MCA OR Equivalent.
* Gate Qualified candidates with BE/Btech in Computer Engg/Computer Science/Information Technology shall only be considered for admission on the basis of GATE score.
Electronic Instrumentation & Control Engineering
BE/BTech/ degree in Electrical/Electronics/Instrumentation Engineering OR MSc Physics with Electronics
Power Systems
BE./BTech in Electrical Engineering.
Thermal Engineering
BE/BTech degree in
Mechanical/Production/Industrial/Aeronautical/Chemical/RAC/Automobile Engineering
MTech Programmes
Biotechnology
B.E./B.Tech. Degree in Biotechnology/Chemical / Industrial Biotechnology / Bio-chemical Engineering /Bio-Medical Engineering / Bio-Informatics or a Bachelor's Degree in Pharmacy or M.Sc. Degree in Biochemistry / Biotechnology / Microbiology / Bio-Physics / Biology / Botany / Zoology/ Genetics / MBBS / M.Sc.(Ag) & M.V.Sc.
Metallurgical & Materials Engineering
BE/BTech degree in any branch of Engineering OR MSc in Materials Science/Physics/ Chemistry (with Physics and Mathematics at BSc Level)
Environmental Science & Technology
BE/BTech degree in Civil/Chemical/Mining/Metallurgy/Biotechnology Engineering OR MSc in Chemistry/Bio-chemistry/Biotechnology/Life Sciences/Atmospheric Sciences.
VLSI Design
BE/BTech degree in Electronics /Computer Science/Electronics & Communication/Electronics (Instrumentation & Control)/Electrical Engineering OR MSc in Computer Science/Electronics/Physics with Electronics / Instrumentation with Mathematics as one of the subjects in B.Sc
Chemical Engineering
B.E./B.Tech. (Chemical Engineering/Technology, Environmental, Biotechnology, Pulp and Paper Technology/Polymer Technology/Metallurgy/Materials/Mechanical/Ceramics Engineering or allied discipline) or M.Sc.(Applied /Industrial Chemistry) with Mathematics upto B.Sc. level.
Computer Applications
BE/BTech Degree in any discipline OR M.Sc. in Mathematics /Statistics /Operation Research /Computer Science / Electronics/ Information Technology/ Physics OR MCA OR equivalent.
Industrial Pollution and Abatement
B.E./B.Tech. (Chemical Engineering/Technology, Environmental, Biotechnology, Pulp and Paper Technology/Polymer Technology/Metallurgy/Materials / Mechanical/Ceramics Engineering/Civil Engineering or allied discipline) or M.Sc. (Chemistry/Applied Chemistry/Industrial Chemistry/Environment/Biotechnology) with Mathematics upto B.Sc. level.
Note: Candidate who has passed Section B of the Institution of Engineers (India) or Grade IETE and has three years of professional experience in reputed organization are also eligible for admission to ME/MTech programme in respective disciplines.
Sponsored Candidates with 55% marks in the qualifying examination are eligible for admission. Such candidates must have a minimum of two years of full time work experience in a registered firm/company/industry/educational and research institutions/any Government Department of Government Organization in the relevant field in which admission is being sought. The employer in the sponsorship certificate must indicate that the fee will be borne by the sponsoring organization and the candidate will not be withdrawn before the completion of the programme. The fee of the sponsored candidates shall be paid by the sponsoring agency from the company’s bank account.
Candidates who are appearing in the final exam of the qualifying degree are eligible to apply. Such candidates have to furnish following undertaking at the time of document checking/’In Person’counselling.
“I am applying on my own risk and responsibility as my final result of the qualifying exam has not been declared by the University.
I do hereby declare that I do not have any backlog paper in any of the previous semesters (Years) of study of the qualifying exam and also I do not expect any backlog in my final exam.
I assure you that I will produce the proof of passing of my qualifying examination with the minimum percentage of marks required on or before December 31, 2013, failing which my admission shall stand cancelled and I shall not claim any right on any count whatsoever.”
10.2 NUMBER OF SEATS
The University offers PG programme of four semesters (regular) and six semesters (part time) leading to ME/Mtech degree. The distribution of seats discipline-wise is as under:
Regular Programs:
Programme
Name of the Deptt/School
Number of Seats
Open
Sponsored
SC/ST
ME Programme
CAD/CAM Engineering
MED
19
5
6
Structural Engineering
CED
19
5
6
Civil Infrastructure Engineering
CED
19
5
6
Electronics & Communication Engineering
ECED
19
5
6
Wireless Communications
ECED
19
5
6
Production Engineering
MED
19
5
6
Software Engineering
CSED
19
5
6
Electronic Instrumentation & Control Engineering
EIED
19
5
6
Computer Science & Engineering
CSED
19
5
6
Power Systems
EIED
19
5
6
Thermal Engineering
MED
19
5
6
Information Security
CSED
19
5
6
MTech Programme
Biotechnology
BTESD
19
5
6
Metallurgical & Materials Engineering
SPMS
19
5
6
Environmental Science & Technology
BTESD
19
5
6
VLSI Design
ECED
19
5
6
Chemical Engineering
CHED
19
5
6
Computer Applications
SMCA
19
5
6
Part time Programs: All the ME/MTech programs offered in regular mode shall also be available in part time mode. In addition MTech (Industrial Pollution Abatement) to be offered by CHED shall also be available in part time mode. The maximum intake in each part time program shall be 10.
In addition to above seats, 1% over and above seats are reserved for children of employees of Thapar University. The candidates seeking admission under this category are required to satisfy
the eligibility as mentioned above at 8.1.
5 seats in each regular discipline of ME/MTech programme are available for FN/NRI candidates. Refer section 16 for eligibility and other conditions.
Seats, if any in the sponsored category remained unfilled; such vacant seat(s) shall be filled by General category candidates.
10.3 LEAVE RULES
ME/MTech regular students getting scholarship shall be entitled for leave for a maximum period of thirty days per year in addition to general holidays but not entitled
to vacation, e.g., summer, winter, etc. The students must apply for leave in advance and obtain the sanction from the concerned Head of the Department/School. The student shall be required to give an undertaking to the effect that he/she would not leave the course midway or appear in any competitive examinations, etc., not related to Engineering & Technology, in order to be eligible to receive this scholarship.
10.4 TIMING FOR PART-TIME CLASSES
The classes for ME/MTech part-time programmes may be held on Saturday and Sunday (whole day) during all the weeks in a Semester. The candidates joining ME (Civil Infrastructure Engineering) in a part time mode shall have the option of doing first semester along with the regular mode.
10.5 DURATION OF PROGRAMME
The normal duration of programme leading to the ME/MTech degree shall be four semesters for regular students and six semesters for part-time students, which includes course work of twelve subjects, seminar, minor project and Dissertation. The maximum duration for regular programmes is six semesters and for part time programmes is ten semesters.
10.6 SCHOLARSHIPS/ASSISTANTSHIP
The candidates admitted in ME/MTech with valid GATE score will be considered to receive scholarships only if approved and amount released by AICTE or any other funding agency. It will be obligatory for every post-graduate student to undertake eight to ten hours per week of work related to teaching and research activities as assigned to him/her by the University. This could include tutorials, laboratories classes, development and maintenance of laboratories, assistance in research and development activities undertaken by faculty members, maintenance and operation of computers and other central facilities, assistance in library etc.
There are 70 teaching assistantships (72,000- per annum: 30, 48,000- per annum: 40) for students who will not be getting GATE scholarships. The decision regarding eligibility criteria for distribution of these scholarships will be decided by DoAA. Teaching load shall be given to such candidates as per the guidelines of the University.
Note: The part-time candidates must produce No Objection Certificate from the present employer/Department.
If the number of students registered is less than ten on the date of registration in a PG programme, then decision of the Director shall be final regarding offering of such programme.
10.7 ME/MTech Admission schedule:
For GATE Qualified candidates:
1
Interview in respective Departments/School
June 18, 2013
2
Deposit of fee
June 18-20, 2013
If selected GATE Qualified candidates fail to deposit the fee by June 13, 2013, the alloted seat shall be cancelled and shall be offered to next candidate in the merit list on June 17, 2013.
Display of number of vacant seats in various disciplines of ME/MTech after offering seats to GATE qualified in above mentioned schedule: July 01, 2013
Counselling including deposit of fee for these vacant seats: July 13, 2013
Last round of counselling for vacant seats if any : July 29, 2013
Note: In all the rounds of counselling, the GATE qualified candidates shall get first preference based on merit. Those who missed the earlier round can attend any counselling held later but their admission will be on merit & subject to availability of seat after offering the seats to all those candidates who have attended the previous rounds (and marked the attendance) & were not offered seat.
There will be ONLINE entrance test as per given schedule.
Note:
i. No TA/DA will be paid for appearing in the Entrance test/Interview etc
ii. A candidate willing to apply for more than one ME/MTech programme, whether in same or different departments/schools, is required to fill separate form for each programme alongwith requisite exam fee.
iii. Candidates are advised to browse www.thapar.edu
GENERAL INFORMATION REGARDING ME/MTECH ENTRANCE TEST INCLUDING ENTRANCE TEST SYLLABUS
Duration of test: 90 minutes (75 Questions)
Negative marking: ¼ marks shall be deducted for each wrong answer.
1 ME PROGRAMME (REGULAR/ PART-TIME)
(I) CAD/CAM ENGINEERING
(II) THERMAL ENGINEERING
(III) PRODUCTION ENGINEERING
Section-A
Solid Mechanics, Machine Design, Theory of Machines, Mechanical Vibrations, Machine Drawing, CAD, CAM and Robotics, Computer Programming
Section-B
Thermodynamics, Steam Engineering, IC Engines and Gas Turbines, Turbo Machines, Fluid Mechanics and Machinery, Refrigeration and Air Conditioning, Heat and Mass Transfer, Power Plant Engineering, Non-conventional Sources of Energy
Section-C
Industrial Engineering, Plant layout, Production Management, Work Study, Inspection and Quality Control, Manufacturing Processes/Technologies, Machining Science, Measurement Techniques, Industrial Automation, Material Science and Metallurgy.
Entrance test exam for admission to ME (CAD/CAM Engineering) shall consist of 50 questions from section-A and 25 questions from section B and C.
Entrance test exam for admission to ME (Thermal Engineering) shall consist of 50 questions from section-B and 25 questions from section A and C.
Entrance test exam for admission to ME (Production Engineering) shall consist of 50 questions from section-C and 25 questions from section A and B.
STRUCTURAL ENGINEERING
Basic Structural Mechanics: Bending moment and shear force diagrams. Analysis of pinjointed and rigid plane frames. Influence lines, Analysis of axially loaded and eccentrically loaded columns. Concrete Technology: Concept of quality control. Concrete making materials. Properties of fresh and hardened concrete. Methods of concrete mix design. Reinforced Concrete: Limit state design methods for flexure, shear, bond and torsion. Design of basic elements using IS: 456-2000. Design of Steel Structures: Design of tension and compression members. Design of beams and columns (including bases and foundations). Welded and riveted joints. Introduction to pre-stressed concrete.
CIVIL INFRASTRUCTURE ENGINEERING
Structures: Free Body Diagrams, bending moments and shear forces in statically determinate beams, analysis of statically determinate and indeterminate structures, influence lines for determinate and indeterminate structures -- basic concepts of matrix methods of structural analysis. Basic working stress and limit states design concepts for design of concrete structures subject to flexure, shear, compression and torsion (beams, columns isolated footings). Analysis and design of steel structures in tension and compression, beams and beam-columns, column bases -- connections - simple and eccentric, beam-column connections, plastic analysis of beams and frames.
Geotechnical Engineering: Origin of soils, soil classification, fundamental definitions, relationship and inter-relationships, permeability and seepage, effective stress principle: consolidation, compaction, shear strength. Sub-surface investigation, earth pressure theories, foundation design requirements, bearing capacity, shallow and deep foundations, load capacity of piles in sands and clays.
Highway and Transportation Engineering: Highway planning, Geometric design of Highways, Testing and specifications of paving materials, Design of flexible and rigid pavements
Water Resources and Hydraulics: Fluid Mechanics and Hydraulics: Hydrostatics, applications of Bernoulli equation, laminar and turbulent flow in pipes, critical flow and gradually varied flow in channels, hydraulic jump, dimensional analysis and hydraulic modeling. Hydrology: Hydrologic cycle, rainfall, evaporation infiltration, unit hydrographs, flood estimation, reservoir design, reservoir and channel routing, well hydraulics. Irrigation: Irrigation methods, Duty, delta, estimation of evapo-transpiration, crop water requirements, design of lined and unlined canals, head works, design of weirs on permeable foundation Gravity dams, Ogee spillways, Earth dams.
ELECTRONICS & COMMUNICATION ENGINEERING/ WIRELESS COMMUNICATIONS
Networks : Network graphs; ,matrices associated with graphs, incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton’s Maximum Power Transfer, Wye-Delta Transformation Steady state sinusoidal analysis using phasors. Fourier series. Linear constant coefficient differential and difference equations; time domain analysis of simple RLC circuits. Laplace and Z transforms; frequency domain analysis of RLC circuits. Convolution 2 port network parameters driving point and transfer functions. State equations for networks. Analog Circuits: Characteristics and equivalent circuits (large and small signal) of diodes, BJTs, JFETs and MOSFETs Simple diode circuits : clipping, clamping, rectifier Biasing and bias stability of transistor and FET amplifiers. Amplifiers : single and multistage, differential, operational; feedback and power. Analysis of amplifiers; frequency response of amplifiers. Simple op-amp circuits. Filters Sinusoidal oscillators: criterian for oscillation; single-transistor and op-amp configurations. Function generators and wave-shaping circuits Power supplies. Digital Circuits: Boolean algebra; minimization of Boolean functions; logic gates, Digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinational circuits; arithmetic circuits, code converters, multiplexers and decoders. Sequential circuits; latches and flip-flops, counters and shift registers. Comparators, timer, multivibrators. Sample and hold circuits, ADCs and DACs. Semiconductor memories Microprocessor :8085/8086; architecture, AL programming, memory and I/O interfacing. Communication System: Fourier analysis of signals amplitude, phase and power spectrum, Autocorrelation and cross-correlation and their Fourier transforms. Signal transmission through linear time-invariant (LTI) system, impulse response and frequency response, group delay and phase delay. Analog modulation systems-amplitude and angle modulation and demodulation systems, spectral, analysis of operations, superheterodyne receivers, elements of hardware realizations of analog communication systems. Basic sampling theorem. Pulse code modulation (PCM), differential pulse code modulation (DPCM), delta modulation (DM). Digital Modulation Scheme : amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK). Multiplexing time division and frequency division, Additive Gaussian noise characterization using correlation. Probability density function (PDF), power spectral density (PSD). Signal to noise ratio (SNR) calculation for amplitude modulation (AM) and frequency (FM) for low noise conditions. Electromagnetism : Elements of vector calculus : gradient, divergence and curl; Gauss’ and Strokes’ theorems, Maxwell’s equations : differential and integral forms. Wave equation. Pointing vector Plane waves :
propagation through various media; reflection; phase and group velocity; Skin depth Transmission lines : Characteristics impedance; impedance transformation, Smith Chart, Impedance matching pulse excitation. Waveguides : Modes in rectangular waveguides; Boundary conditions; Cut-Off frequencies; Dispersion relations. Antennas: Dipole antennas; antenna arrays; radiation pattern; reciprocity theorem; antenna gain.
SOFTWARE ENGINEERING/COMPUTER SCIENCE & ENGG/ INFORMATION SECURITY
Section-I: Logical Reasoning & Analytical Ability
Section-II: Mathematical Foundations of Computer Science
Mathematical Logic: Prepositional logic, first-order logic, Probability: Random variables and expectation, conditional probability, independent random variables, frequency distributions; Discrete Mathematics: Sets, relations, functions, groups, lattices, boolean algebra, induction, recurrence relations; Combinatorics: Permutations, combinations, counting, summation; Elementary Graph Theory: Basic properties, graph traversals, topological sort, spanning tree, shortest paths; Computational Techniques: Solution of non-linear equations, elementary concepts of linear and matrix algebra, solution of system of linear equations, curve fitting and interpolation, numerical differentiation and integration, regression and correlation analysis; Theory of Computation: Regular languages and finite automata, context free languages and pushdown automata, Turing machines.
Section III: Computer Hardware
Digital Logic: Logic functions, minimization, design and synthesis of combinational and sequential circuits; Number Representation and Computer Arithmetic; Computer Organization: Machine instructions and addressing modes, ALU and data-paths, hardwired and micro-programmed control, memory interface, I/O interfaces, serial communication interface, instruction pipelining, cache, main and secondary storage.
Section IV: Software Systems
Programming Methodology: C programming, program control, functions, recursion, scope, binding, parameter passing, pointers, array handling, structures and unions, file handling, elementary concepts of Object Oriented, Functional and Logic Programming; Data Structures: Notion of abstract data types, stacks, queues, linked lists, trees, heap, graphs; Algorithms for Problem Solving: Tree and graph traversals, connected components spanning trees, shortest paths, hashing, sorting, searching; design techniques; Complier Design: Lexical analysis, parsing, syntax directed translation, runtime environment, code generation, linking; Operating Systems: Classical concepts (concurrency, synchronization, deadlock), processes, threads and inter-process communication, CPU scheduling, memory management, file systems, I/O systems, protection and security; Database Systems: Relational model, ER diagram, relational algebra, database design, normalization, SQL, file structures, transactions management and concurrency control; Computer Networks: ISO/OSI stack, sliding window protocol, LAN technologies (Ethernet, Token ring), TCP/UDP, IP, Basic concepts of switches, gateways and routers.
ELECTRONIC INSTRUMENTATION & CONTROL ENGINEERING
Mathematical Principles: Laplace and Fourier transform, Theory of maxima & minima. Electrical Principles: Kirchoff’s laws, Norton/Thevenin theorem, Current- voltage transformation, Ideal current source, Ideal voltage source. Electronic Principles: Zener/Avalanche breakdown, Basic Transistor Operation, Biasing Circuits, SCR, MOSFET, Oscillator & Amplifier Principles, Op-Amps, their applications, Logic gates, Flip flops,
Timers, Counters & Registers. Microprocessor : 8085 & 8086 architecture, Addressing modes of 8085 & 8086, Mnemonics, Basic programming, RS-232 protocol. Electrical Measurements: PMMC, moving iron Galvanometer, Electro dynamometer, Wattmeter, Wheat-stone Bridge, Maxwelll Bridge, De-saute’s, Bridge, Current & Voltage transformer, Q-meter, Distortion meter, digital Voltmeter, CRO-analog & digital. Generalized Measurement Systems: Generalized impedance & stiffness concepts, Static-response of step & ramp signals to 1st & 2nd order systems, Loading effects, Analogies. Signal Conditioning & Display : Filters-active & passive, Dead time elements, LED/LCD. Process Modelling & Control : Lumped & Distributed parameters, interacting & non interacting systems, Concept of feedback & fed forward control, Actuators like Relay, Stepper motor, Servo motor, Pneumatic valves. Industrial Measurements: Principles of Level, Flow, Pressure, Temperature and Vibration measurements. Analytical & Biomedical Instrumentation: Principles of UV, Visual Spectroscopy, chromatographic techniques, Thermography & ultrasonography Cardiovasular Measurements.
POWER SYSTEMS
Power Systems : Transmission line - performance, models, Cables, Electrical & mechanical design of transmission line, Load flow and solution techniques, Symmetrical and unsymmetrical faults, Insulators, Circuit breakers, Electromechanical relays, Static relays, Protection schemes for feeders, generators, motors and transformers. High Voltage AC, DC and Impulse voltages generation and measurement; breakdown in solid, liquid and gases, Transient phenomenon in power systems.
Electrical Machines & Drives : Electromechanical energy conversion principals; construction, operation and performance of Transformer and rotating electrical machines, Drives – Basics, starting, speed control, braking through conventional and static drives.
Networks : Network Topology, Network Theorems, Circuit transients, Laplace transforms, Single and Three phase system, Fourier analysis, Magnetic circuits, Two port Network, Network Synthesis.
Electronics : Diode and Transistor, Operational Amplifiers, Oscillators: Boolean algebra; logic and sequential circuits : registers, counters, flip flops, Semiconductor memories, Microprocessor (8085), architecture, programming, memory and 1/0 Interfacing; Thyristors and power converter.
2 MTech PROGRAMMES (REGULAR)
METALLURGICAL & MATERIALS ENGINEERING
Bonding in solids, electronic configurations, ionic, covalent, metallic and secondary bonds. Space lattice and unit cells; crystal systems; indices for planes and directions; effect of radius ratio on coordination; structures of common metallic, semiconducting, polymeric, ceramic, amorphous/glassy materials. X-ray diffraction, Bragg's law, use of x-ray diffraction for the determination of simple crystal structures; Point, line and surface defects; geometry of edge and screw dislocations; Burger's vector; energy of dislocations; First and second Fick's laws of diffusion and their solutions under simple boundary conditions; Solid solutions; intermediate phases and intermetallic compounds; Gibbs' phase rule; unary and binary phase diagrams; iron-iron carbide phase diagram; Phase transformations; nucleation and growth; solidification; crystal growth and zone refining; precipitation hardening; recrycstallization and grain growth; martensitic transformations; Elastic behaviour of materials including composite, atomic models of
elasticity, rubber-like elasticity; Plastic deformation; slip systems in crystals; critical resolved shear stress; strengthening mechanisms; ductile and brittle fracture; Griffith's criterion, mechanisms of creep; fatigue; Polymeric materials; polymerization, cross-linking; glass transition; composites; Absorption, oxidation and corrosion; Thermal properties of materials, specific heat, thermal conductivity, thermoelectricity; Electrical/electronic behaviour of materials; electrical conductivity; free electron and band theory of solids; intrinsic and extrinsic semiconductors; p-n junctions; solar cells; superconductivity; type I and II superconductors and their applications; Dielectric behaviour of materials; polarization phenomena; spontaneous polarization; dielectric constant and loss; piezo - and Ferro electricity; Magnetic behaviour of materials; dia-, para-, ferro and ferrimagnetism; soft and hard magnetic materials and their applications; Optical properties of materials; refractive index, absorption and emission of light; optical fibres, lasers and optoelectronic materials.
ENVIRONMENTAL SCIENCE & TECHNOLOGY
Interactions between humans and environment; The physical environment- land water, and climate; Resources and their management- Natural, Technological and Human; Concept of sustainability- Natural ecosystems and sustainability; Agricultural and Industrial systems from the angles of environment protection; Environmental Chemistry- Analytical Techniques and instrumentation; Atmospheric Chemistry; Basic Microbiology- nature and extent of microbial world; growth and energetics, Microbiology of water and wastewater; Microbial Corrosion and biofouling; Quantity of Water- per capita demand, factor affecting the demand; Quality of water- physical, chemicals and biological characteristics, Treatment of water- Sedimentation, Coagulation; filtration; Chlorination; absorption; adsorption, and Miscellaneous methods; Sewage and sewerage systems; Primary and Secondary treatment of sewage- aerobic and anaerobic processes and their applications in the wastewater treatment.
VLSI DESIGN
Logical and Analytical Ability; Fundamentals of Computer and C programming: Basics of Computers; Operators, Data types, Expression, Control Flow statement, Functions, Arrays, Strings, pointers, structures, and unions. Data Structures and Algorithms: Data types, structures, stacks, queues, and linked lists. Sorting and Searching, B-trees, B+ trees and hashing. Networks : Network graphs; ,matrices associated with graphs, incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton’s Maximum Power Transfer, Wye-Delta Transformation Steady state sinusoidal analysis using phasors. Fourier series. Linear constant coefficient differential and difference equations; time domain analysis of simple RLC circuits. Laplace and Z transforms; frequency domain analysis of RLC circuits. Convolution 2 port network parameters driving point and transfer functions. State equations for networks. Semiconductor Devices and Analog Circuits : Characteristics and0020equivalent circuits (large and small signal ) of diodes, BJTs, FETs, JFETs, MOSFETs, UJT, SCR, photodiode, phototransistor, etc. Simple diode circuits; clipping, champing, rectifier, biasing and bias stability of transistor and FET amplifiers. Amplifiers : single and multistage, differential, operational, feedback and power, Analysis of amplifiers. Amplifiers : frequency response of amplifiers, simple op-amp circuits. Sinusoidal Oscillators: criterion for oscillation; op-amp configurations. Function generators and wave shaping circuits. Regulated power supplies. Digital Circuits : Number Systems, Fixed-point and floating number representations, Boolean Algebra, Demorgan’s therorems, minimization of Boolean functions, logic gates, digital logic families (DTL, TTL, ECL, MOS, CMOS), Combinational circuits, arithmetic circuits, code converter, multiplexers and decoders; sequential circuits : latches and flipflops,
Registers, Counters, Comparators, timers, multivibrators; Sample and hold circuits, ADCs and DACs; Semiconductor memories. Microprocessors : Evolution, microcomputer architecture; Intel 8085: architecture, addressing mode, Instruction set, programming technique, Interrupt Structure; Intel 8086: architecture, concept of segmented memory, addressing modes, Instruction set, programming techniques, Interrupt Structure; Interfacing devices i.e. 8255,8279,8257,8253,8259etc.: memory and I/O interfacing, read/write timing diagrams. Computer Architecture : Basic computer organization and Design, memory organization, I/O organization, I/O Devices, Data transfer techniques, Register transfer Language Microprogrammed control, CPU, Concept and CISC and RISC architecture.
CHEMICAL ENGINEERING
Process Calculations and Thermodynamics: Laws of conservation of mass and energy; degree of freedom analysis, first and second laws of thermodynamics and their applications; phase equilibria; chemical reaction equilibria. Fluid Mechanics and Mechanical Operations: Fluid statistics, Bernoulli equation, macroscopic friction factors, dimensional analysis, flow through pipeline systems, flow meters pumps and compressors, packed and fluidized beds, size reduction and size separation, free and hindered settings, centrifuges and cyclones; thickening, filtration, mixing and agitation, conveying. Heat Transfer: conduction, convection, radiation, heat exchangers, evaporators. Mass Transfer: Ficks’ law, molecular diffusion in fluids, distillation, absorption, adsorption, drying, Chemical Reaction Engineering: Kinetics of homogeneous reactions, interpretation of kinetic data, residence time distributions, kinetics of heterogeneous catalytic reactions; diffusion effects in catalysts. Instrumentation and Process Control: Dynamics of simple systems, controller modes (P, PI and PID). Plant Design and Economics: Design and sizing of chemical engineering equipment, principles of process economics and cost estimation. Chemical Technology: Inorganic chemical industries, sulfuric acid, NaOH, fertilizers (Ammonia, Urea, SSP and TSP); organic chemical industries Pulp and Paper, Sugar, Oil and Fats; petroleum refining and petrochemicals, polymerization industries: - polypropylene, PVC and polyester synthetic fibers. Process modeling and simulation: Equation of continuity, momentum, energy, Models for Reactors, heat exchangers, distillation, Columns, Computational methods in chemical engineering: PDE, ODE, use of excel sheet, MATLAB, Differential Equations: First order (Linear and nonlinear), Laplace transforms, Numerical Methods: Numerical solutions of linear and non linear algebraic equations, integration by trapezoidal and Simpson’s rule, single and multi-step methods of differential equations Probability and Statistics: Mean median mode and standard deviation, random variables, Poisson, normal and binominal distributions.
COMPUTER APPLICATIONS
Section-I: Analytical Ability (20 Marks)
The questions in this section will cover logical reasoning, quantitative reasoning, and visual-spatial reasoning.
Section-II: Mathematical Aspects of Computer Science ( 40 Marks)
Combinatorics : Permutations, combinations, counting, summation;
Theory of Probability : Axiomatic definition of Probability, conditional probability, Baye’s Theorem : random variables, Functions of random variables. Expectation, Probability distributions: Binomial Poisson, Exponential and Nomial distribution and their moment generating functions.
Discrete Mathematics : Sets, relations, functions, lattices, Boolean algebra, induction, recurrence relations.
Groups, Subgroups, Homomorphisms, Normal and subnormal subgroups.
Linear Algebra:
Review of matrices, Consistency of system of Linear equations. Vector spaces and subspace, linear independence and dependence of vectors, Basis and dimensions. Rank and nullity of a linear transformation, Eigen values and eigenvectors of a Matrix, diagonalization.
Optimization Techniques
Linear Programming : Graphical method, Simplex method, Duality Theory and Sensitivity Analysis.
Transportation and Assignment Problem: Initial Basic Feasible Solutions of Balanced and Unbalanced Problems, Optimal Solutions.
Network Analysis : Shortest Path problem. Minimum Spanning Tree Problem. Maximum Flow Problem. Minimum Cost Flow Problem.
Numerical Techniques : Number systems, Solution of non-linear equations, solution of system of linear equations, curve fitting, interpolation, numerical differentiation and integration, solutions of IVP.
Section III: Concepts of Computer Science (40 Marks)
Number Representation and Computer Arithmetic
Computer Organization : Machine instructions and addressing modes, ALU and data-paths, hardwired and micro-programmed control pipelining , memory interface, I/O interfaces, serial communication interface, parallel processing, memory management
Structured and object oriented programming concepts (with reference to “C/ C++”):
Program control, functions, recursion, scope, binding, parameter passing, pointers, array handling, structures and unions, file handling, concepts of Object Oriented Programming.
Data Structures : Notion of abstract data types, stacks, queues, linked lists, trees, heap,graphs, Tree and graph traversals, hashing, sorting, searching.
Theory of Computation : Regular languages and finite automata, context free languages and pushdown automata, Turing machines.
Complier Design : Lexical analysis, parsing, syntax directed translation, runtime environment, code generation, linking.
Operating Systems: Definition and significance of OS, OS as resource manager, Classical concepts processes, concurrency, synchronization, deadlock, threads and inter-process communication, CPU scheduling, memory management, file systems, I/O systems, protection and security, DOS, UNIX and windows.
Database Management Systems: Relational model, ER diagram, relational algebra, database design, normalization, SQL, transactions management and concurrency control.
Computer Networks: OSI reference model, sliding window protocols, LAN technologies (Ethernet, Token ring), TCP/UDP, IP, , Networking addresses, transmission medias, Networking devices-Hub, switches. gateways and routers.
Software Engineering: Basics of s/w engineering, Software Process models, software project planning and management.
BIOTECHNOLOGY
Microbiology: Prokaryotic and eukaryotic cell structure; Microbial nutrition, growth and control; Microbial metabolism (aerobic and anaerobic respiration, photosynthesis); Nitrogen fixation; Chemical basis of mutations and mutagens; Microbial genetics (plasmids, transformation, transduction, conjugation); Microbial diversity and characteristic features; Viruses.
Biochemistry: Biomolecules and their conformation; Ramachandran map; Weak inter-molecular interactions in biomacromolecules; Chemical and functional nature of enzymes; Kinetics of single substrate and bi-substrate enzyme catalyzed reactions; Bioenergetics; Metabolism (Glycolysis, TCA and Oxidative phosphorylation); Membrane transport and pumps; Cell cycle and cell growth control; Cell signaling and signal transduction; Biochemical and biophysical techniques for macromolecular analysis
Molecular Biology and Genetics: Molecular structure of genes and chromosomes; DNA replication and control; Transcription and its control; Translational processes; Regulatory controls in prokaryotes and eukaryotes; Mendelian inheritance; Gene interaction; Complementation; Linkage, recombination and chromosome mapping; Extrachromosomal inheritance; Chromosomal variation; Population genetics; Transposable elements, Molecular basis of genetic diseases and applications
Process Biotechnology: Bioprocess technology for the production of cell biomass and primary/secondary metabolites, such as baker’s yeast, ethanol, citric acid, amino acids, exopolysacharides, antibiotics and pigments etc.; Microbial production, purification and bioprocess application(s) of industrial enzymes; Production and purification of recombinant proteins on a large scale; Chromatographic and membrane based bioseparation methods; Immobilization of enzymes and cells and their application for bioconversion processes. Aerobic and anaerobic biological processes for stabilization of solid / liquid wastes; Bioremediation.
Bioprocess Engineering: Kinetics of microbial growth, substrate utilization and product formation; Simple structured models; Sterilization of air and media; Batch, fed-batch and continuous processes; Aeration and agitation; Mass transfer in bioreactors; Rheology of fermentation fluids; Scale-up concepts; Design of fermentation media; Various types of microbial and enzyme reactors; Instrumentation in bioreactors.
Plant and Animal Biotechnology: Special features and organization of plant cells; Totipotency; Regeneration of plants; Plant products of industrial importance; Biochemistry of major metabolic pathways and products; Autotrophic and heterotrophic growth; Plant growth regulators and elicitors; Cell suspension culture development: methodology, kinetics of growth and production formation, nutrient optimization; Production of secondary metabolites by plant suspension cultures; Hairy root cultures and their cultivation. Techniques in raising transgencies.
Immunology: The origin of immunology; Inherent immunity; Humoral and cell mediated immunity; Primary and secondary lymphoid organ; Antigen; B and T cells and Macrophages; Major histocompatibility complex (MHC); Antigen processing and presentation; Synthesis of antibody and secretion; Molecular basis of antibody diversity; Polyclonal and monoclonal antibody; Complement; Antigen-antibody reaction; Regulation of immune response; Immune tolerance; Hyper sensitivity; Autoimmunity; Graft versus host reaction.
Recombinant DNA Technology: Restriction and modification enzymes; Vectors: plasmid, bacteriophage and other viral vectors, cosmids, Ti plasmid, yeast artificial chromosome; cDNA and genomic DNA library; Gene isolation; Gene cloning; Expression of cloned gene; Transposons and gene targeting; DNA labeling; DNA sequencing; Polymerase chain reactions; DNA fingerprinting; Southern and northern blotting; In-situ hybridization; RAPD; RFLP; Site directed mutagenesis; Gene transfer technologies; Gene therapy.
Bioinformatics: Major bioinformatics resources (NCBI, EBI, ExPASy); Sequence and structure databases; Sequence analysis (biomolecular sequence file formats, scoring matrices, sequence alignment, phylogeny); Genomics and Proteomics (Large scale genome sequencing strategies; Comparative genomics; Understanding DNA microarrays and protein arrays); Molecular modeling and simulations (basic concepts including concept of force fields).
Plant Sciences: Plant cell structure, organization, organelles, cytoskeleton, cell wall and membranes; anatomy of root, stem and leaves, meristems, vascular system, their ontogeny,structure and functions, secondary growth in plants and stellar organization; Plant water relations, transport of minerals and solutes, stress physiology, stomatal physiology, signal transduction, N2 metabolism, photosynthesis, photorespiration; respiration ; Flowering: photoperiodism and vernalization, biochemical mechanisms involved in flowering; molecular mechanism of senencensce and aging, biosynthesis, mechanism of action and physiological effects of plant growth regulators, Principles of Mendelian inheritance and linkage. Principles, methods - selection, hybridization, heterosis; male sterility, genetic maps and molecular markers, sporophytic and gametophytic self incompability, haploidy, triploidy, somatic cell hybridization, A general account of economically and medicinally important plants; Nature and classification of plant diseases; plant-microbe beneficial interactions diseases of important crops caused by fungi, bacteria and viruses, and their control measures, mechanism(s) of pathogenesis and resistance, molecular detection of pathogens; Ecosystems - types, dynamics, degradation, ecological succession; food chains and energy flow.
Animal Sciences: Broad classification of Animals, Origin and history of life on earth, theories of evolution, natural selection, adaptation, Speciation, Comparative physiology, the respiratory system, circulatory system, digestive system, the nervous system, the excretory system, the endocrine system, the reproductive system, the skeletal system, osmoregulation Nature of parasite, host-parasite relation Embryonic development, cellular differentiation, organogenesis, metamorphosis, genetic basis of development, stem cells. Metabolism, regulation and nutritional requirements for mass cultivation of animal cell cultures; Kinetics of cell growth and product formation and effect of shear force; Product and substrate transport; Micro & macro-carrier culture; Hybridoma technology; Live stock improvement; Cloning in animals; Genetic engineering in animal cell culture; Animal cell preservation.
INDUSTRIAL POLLUTION AND ABATEMENT
Mathematics: Algebra, calculus, and differential equations: first order (linear and nonlinear), numerical solutions of linear and non linear algebraic equations, integration by trapezoidal and Simpson’s rule, single and multi-step methods of differential equations.
Probability and Statistics: Mean, median, mode and standard deviation, random variables, Poisson, normal and binominal distributions.
Thermodynamics: Laws of conservation of mass and energy; degree of freedom, first and second laws of thermodynamics and their applications,
Fluid Mechanics: Fluid statistics, Bernoulli equation, friction factors, flow through pipeline systems, flow meters, pumps and compressors.
Energy Technology: Primary and secondary fuels, non-conventional energy resources.
Fundamentals of Environmental Chemistry: Stochiometry, Gibb’s energy, chemical potential, chemical equilibria, acid base reactions, solubility product, solubility of gases in water, the carbonate system, unsaturated and saturated hydrocarbons and reaction kinetics.
Pollution: Definition, causes, effects and control measures of the pollution – air, soil, noise, water, marine and thermal and nuclear pollution, solid waste management, role of Individual in prevention of pollution, disaster management.
Social Issues: Sustainable development, water conservation, environmental ethics, climatic change, wasteland reclamation, environmental protection acts and issues.
Biotechnology: Biochemical kinetics, bioreactors, transport phenomena in bioprocess systems.
11. PhD PROGRAMME
(i)
A candidate seeking admission to the degree of Doctor of Philosophy must have obtained ME/MTech/MPhil/MCA/MSc/MA/MBA/CA or equivalent with minimum CGPA of 6.00 on a 10 point scale or 55% marks in aggregate where marks are awarded or NET (UGC/CSIR) qualified.
(ii)
Candidates with BE/BTech degree or equivalent with excellent academic record (minimum CGPA of 9.00 on 10 point scale or 80% marks in aggregate) may be considered for admission.
Relaxation in CGPA to 7.00 on a 10-point scale or in marks to 65% for the minimum eligibility conditions may be permitted for candidates with a BE / BTech degree or equivalent who have a minimum of 3 years of professional and/or research experience in the area in which the admission is sought. However, candidates admitted with BE/BTech or equivalent qualification will be admitted for PhD after successful completion of eight Masters level courses as suggested by the PhD Admission Committee of concerned Department/School, within a period of two years from the date of admission. A minimum CGPA of 6.00 on a 10-point scale should be earned in the courses prescribed by the concerned Department/School.
(iii)
Part-time studies leading to PhD degree are permitted for professionally employed personnel. Part-time studies leading to PhD shall also be permitted to persons working in Institutions with which a Memorandum of Understanding has been signed for research purposes. Such a candidate must be in employment at the time of admission and be engaged in professional work in the area to which admission is sought.
(iv)
Admission of a PhD candidate in a department/ school other than his/her basic background: Suitability of a candidate is the purview of admission committee, if a candidate qualifies the test and interview then he/she should be allowed to pursue PhD Program. However, the admission committee may recommend additional courses for the candidate to clear.
(v)
Candidates shall be admitted on the basis of merit of Entrance Test and Interview to be conducted by the University. The candidates who secure minimum of 20% marks in the written exam shall only be called for Interview. During interview, a candidate is required to indicate area of research.
Relaxation for appearing in the Entrance Test may be given by the University to those candidates who have qualified UGC/CSIR (JRF).
(vi) Every admitted candidate shall have to do course work for a minimum of one semester. The course work shall include at least three courses, namely, a course on research methodology (may include quantitative methods and computer Applications) or a course proposed by the Admission Committee (for those who have studied a similar course on Research Methodology at PG level), a professional course (if not offered by any Department/ School, its syllabus to be proposed by the allocated supervisor and approved by DoAA) and a seminar (Relevant in the area of research). Minimum credits for the course work shall be 11 including a seminar of 4 credits. The process of registration in the course work, examination, evaluation and grading shall be same as followed for UG/PG programmes.
Only those candidates who successfully complete the course work within one year of admission and with a minimum CGPA of 6.00 on 10.00 point scale shall be registered in the PhD programme.
Every candidate will be required to submit research proposal, duly recommended by the Supervisor(s), after successful completion of the course work ( December 31 shall be taken as date of completion of course work for odd semester and June 30 shall be taken as date of completion for even semester). The minimum time period to submit the research proposal shall be one semester from the date of admission and maximum time allowed to submit the research proposal shall be one year from the date of admission.
Research proposal will be submitted to the concerned Head of the Department/School. In case of non-submission of proposal within one year, DoRSP on the recommendations of the Supervisor and Head of the Department/School may grant an extension for a maximum period of six months.
If the candidate fails to submit the proposal even during the extended period her/his admission will be cancelled. In case the proposal is rejected by the URB, she may resubmit it within next six months starting the date of meeting of URB failing which her/his admission will be cancelled
Notes:
(a)
Part-time candidates are required to submit the “No Objection Certificate” from their parent organization/department/employer stating that the candidate is permitted to pursue studies on a part-time basis and that the candidate’s official duties permit her/him to devote sufficient time for course work and research.
(b) In case of FN candidates, Research VISA endorsed to TU is required.

11.1 GENERAL INFORMATION
TU offers PhD programme in almost all specializations of Engineering, Technology, Management and Sciences in the following Departments/Schools of the University (currently around 584 PhD candidates are working for their PhD degrees in the University).
DEPARTMENTS
Biotechnology & Environmental Sciences Department
Agro-Biotechnology, Plant Biotechnology, Bioremediation, Microbial Ecology, Food Technology, Food process and Safety, Plant Microbe Interaction, Tissue culture, Sustainable Agriculture, Bioinformatics, Environmental Engineering, Environmental Sciences & Technology, Areas of Animal Biotechnology and Microbial Concrete.
Chemical Engineering Department
Modeling and Simulation, Catalysis, Environment Pollution, Polymers and Composities, Mass Transfer, Bio-Chemical Engineering, Heat Transer, Nanofluids, Nanocomposites, Pulp and Paper, Energy Management, Membrane Separation.
Civil Engineering Department
Structural Engineering, Geo-technical, Engineering, Transportation Engineering, Construction Engineering and Management and Computer Aided Design, Water Resource Engineering.
Computer Science & Engineering Department
Parallel and Distributed Computing, Software Engineering, Network and Information Security, Soft Computing, Wireless and Sensor Networks, Theoretical Computer Science.
Electrical & Instrumentation Engineering Department
Optimal Power System Operation ; Electric Drives; Application of FACTS; Power Electronics ;Process Control & Instrumentation, Artificial Intelligence Applications , Biomedical Instrumentation, Embedded systems, Virtual Instrumentation, Control System.
Electronics & Communication Engineering Department
RF Devices, Antennas and Micro-wave integrated circuits, solid State & thin films, Digital Signal processing;VLSI, Wireless Communication, Optical Communication, Opto Electronics.
Mechanical Engineering Department
Heat Transfer; IC Engines; Energy Conservation and Management; Bearings & Lubrication; Computer Aided Analysis & Design; Industrial Engineering, Robotics and Vehicle dynamics; Modelling of multibody systems; Fluid Mechanics, Technology Management, Materials and Metallurgy, Production Engineering, Manufacturing Engineering.
SCHOOLS
School of Physics & Materials Science
Solid State Physics; Materials Science; Nano Science; Liquid Crystal; Electroceramics Smart Materials; Magnetic Material, Condensed Matter Physics, Nuclear Physics.
School of Behavioral Science and Business Studies
Industrial Management, Business Economics, Intellectual Property Rights, E-Business, Finance, Organizational Behavior, Cognitive & Experimental Psychology
School of Mathematics & Computer Applications
Operations Research; Functional Analysis; Reliability; Fourier Analysis; Biomathematics; Differential Equations; Algebra; Pattern Recognition; Soft computing; Theory of fuzzy sets; Number Theory; Astrophysics; Grid Computing, Software Engineering
School of Chemistry & Biochemistry
Analytical Chemistry, Organic Chemistry, Organometallic Chemistry, Environmental Chemistry, Medicinal Chemistry/Inorganic Chemistry/ Nano Chemistry/ Nano – Materials/ Bio-physical Chemistry.
L M Thapar School of Management
International Business; Innovation Systems; Economics; Information Systems; Strategic Management; IPR; Supply chain management; Corporate Finance; Investment Management
School of Energy and Environment
Environmental Technology & Management, Environmental Engineering.
11.2 Number of Seats available for first semester of session 2013-14: Candidates are advised to browse www.thapar.edu for updated information about any further availability of seats for PhD. Departments No. of Seats Specialization
Biotechnology & Environmental Sciences
02
Microbiology/Molecular Biology
02
Bioremediation & Agricultural Biology
01
Plant Molecular Biology
01
Plant Biotechnology
01
Food Science & Technology
Chemical Engineering
03
Adsorption/ Polymer/Co2 sequestration
04
Adsorption/ Reactor Engg. And Catalysis
02
Membrane separation
01
Adsorption
01
Heat, energy, non-fluids, Hydrogen energy
01
Novel Materials for H2 storage
02
Thermodynamic properties of nano-confined fluids
01
Waste water treatment by electro oxidation
01
Waste water treatment by biological methods
03
Divided wall distillation column (Extractive/reactive, Waste water treatment by electro chemical, Adsorption etc.
Civil Engineering
02
Structural Engineering
02
Structural Materials
04
Water Resources Engg.
01
Structures
01
Structures, Health Monitoring
01
Geotechnical Engg.
Computer Science & Engineering
02
Cloud Computing, Semantic Web & Cultural Computing
02
Cloud Computing, Grid Computing, Software Engineering
02
Soft Computing, Computer Network
01
Big Data Processing, Fault-tolerant Networks
02
Computer Networks
01
Vanets, Semantics
01
Routing Optimization
01
Natural Language Processing
Electrical & Instrumentation Engineering
02
Electrical
01
Instrumentation
02
Image Processing, Biometrics
Electronics & Communication Engineering
02
Fiber Optics Communication
01
Digital Signal Processing & Communication System
02
Fiber Optics Communication Systems
02
Wireless Communication & signal Processing
04
Wireless Communication
02
Integrated Opto-electronics
01
VLSI Signal Processing
Mechanical Engineering
01
Machine Design
01
Materials and Metallurgy
02
Computer aided analysis & Design
02
Vehicle Dynamics, Modelling of multibody systems. Schools
School of Physics & Materials Science
02
Soft Condensed Matter Physics
02
Nano material
05
Nuclear Physics (Thoritical)
02
Particle Physics
01
Non Linear Optics
01
Solar Cell
School of Behavioral Science and Business Studies
02
Industrial Management/Finance
03
Cognitive & Experimental Psychology
School of Mathematics & Computer Applications
01
Cloud Computing/ Software Engg.
01
Astro Physics
02
Operational Research/ Numerical Analysis
01
Differential Equations
04
Operations Research
01
Theoretical Seismology
01
Numerical Analysis
01
Harmonic Analysis/ Functional Analysis
01
Natural Language Processing
School of Chemistry & Biochemistry
02
Chemical Sensors
01
Heterogeneous Catalysis
01
Biodiesel/ Catalysis
02
Organic Synthesis
02
Biophysical and Bioinorganic Chemistry
01
Organic and Medicinal Chemistry
02
Metal-organic frame works
03
Synthetic Organic Chemistry and Medicinal Chemistry
02
Organic Chemistry
L M Thapar School of Management
Nil
School of Energy and Environment
02
Environmental Technology & Management
01
Environmental Engineering
The policy of UGC guidelines regarding reservation of seats for SC/ST and PH candidates shall be followed.
11.3 The application form along with attested copies of certificates must be submitted to the ‘Incharge Admission Cell” on or before the specified dates for the odd semester and even semester. Incomplete application forms and those received after the prescribed date will not be entertained under any circumstances. No correspondence/enquiry from such candidates shall be entertained.
No separate intimation will be sent regarding conduct of exam, Interview and start of session. Application form must accompany:
(i) Attested copies of the certificates of the examinations passed.
(ii) One passport size photograph pasted on the application form in the space
provided for the purpose.
11.4 DURATION
The student shall submit his/her thesis to the Registrar within five years but not earlier than 2.5 years in case of regular and 3.5 years in case of part time student from the date of his/her admission.
11.5 TEACHING ASSOCIATESHIP
i Eligibility
The associateship may be granted to candidates out of those admitted to the PhD (Regular) programme. Only those candidates will be considered who have obtained minimum CGPA of 6.75 (10.00 point scale) or first division in their qualifying examination. Teaching associateship is also available to full time Ph.D students admitted to engineering department having B.E/ B.Tech qualification under TEQIP
ii Number and Values of the Associateship
Teaching Associateship are allocated to each Department/School depending upon their requirement. The numbers of Teaching Associateship vary from time to time.
Emoluments for the Teaching Associateship will be 13,000/- (including contingency) per month or as approved from time to time by the University.
Suitable accommodation may be provided, if available in the University on rental basis.
iii Duration
The associateship will be tenable for one semester at the first instance from the date of selection, to be renewed after every semester as per requirement of the Deptt./School.
iv General Conditions
A scholar who has been selected for the award will be given 8-12 hours of teaching load per week.
A scholar who has been selected for associateship shall not be eligible for any other fellowship from the University or from any other source.
A scholar who has been selected for associateship shall be liable to pay tuition fee and other dues as prescribed by the University from time to time.
GENERAL INFORMATION REGARDING PhD ENTRANCE TEST
Duration of test: 90 minutes (75 Questions)
1/4th mark will be deducted for each wrong answer.
Syllabus for the Ph.D entrance examination
1. English & General Studies
Interpersonal skills including communication skills, anonyms/synonyms, sentence completion, active/passive voice, prepositions, direct/indirect speech, idioms & phrases. General issues on environmental ecology, biodiversity and climate change (not requiring subject specialization). Economic and social development – multilateral trade agreement, sustainable development, poverty, inclusion, demographics, social sector initiatives, etc. Indian polity and governance – constitution, political system, public policy, rights issues, etc. Indian and world geography – physical, social, economic geography of India and the world. History of India and Indian national movement. Nobel prize winners, inventions & discoveries, awards & recognitions
2. Quantitative Reasoning
Ratios and proportion, percentages, profit & loss, averages, partnership; time-speed-distance, work and time; number system, factors, multiples; pipes and cisterns, simple interest & compound interest, installment payments; clocks, calendar; in-equations, quadratic and linear equations, functions, logarithm geometry, mensuration and solid geometry, geometry (lines, angles, triangles, spheres, rectangles, cube, cone etc), co-ordinate geometry.
Set theory, measures of central tendency and dispersion, probability and theory random variables (single variable case only), probability distribution (binomial, poisson and normal), correlation & regression; permutation & combinations; maxima & minima progression; complex numbers; data Interpretation based on text, graphs (column graphs, bar graphs, line charts, Pie charts, graphs representing area) and tables.
3. Analytical Reasoning & Mental Ability
Critical reasoning, visual reasoning, assumption-premise-conclusion, assertion and reasons; statements and assumptions, identifying valid inferences, identifying strong arguments and weak arguments, statements and conclusions; cause and effect, identifying probably true, probably false, definitely true, definitely false kind of statement; linear arrangements, matrix arrangements, puzzles, family tree problem, symbol based problems; coding and decoding, sequencing, identifying next number in series, etc; tables. Basic numeracy (numbers and their relations, orders of magnitude, etc.)
12 MBA Admission- Derabassi campus*, SAS Nagar (Mohali)
Thapar University is a renowned institution in the field of technology education for more than fifty-five years. L M Thapar School of Management (LMTSOM) is one of the key strategic initiatives of the University in the domain of techno-management learning. The school visualizes that management and technology have an inseparable relationship and hence it blends technology with management through its comprehensive course structure and interactive pedagogy.
The school has been successful in creating a new breed of managers who are equipped with the appropriate armour to face the uncertain realities and complexities of the twenty-first century. The emphasis of the school is on student-centric experiential learning based on application of ideas and concepts. A major strength of the school is its illustrious and highly experienced faculty with diverse industry experience and high research orientation. The core faculty is supported by distinguished visiting and guest faculty from the industry as well as academia.
Schedule:
1. Last date for receipt of Application forms : June 10, 2013
2. Online Entrance Examination : June 26-30, 2013
3. Result of entrance test : July 8, 2013
3. GD & interviews of short listed candidates : July 13-14, 2013
4. Display of Master Merit List (MML) : July 17, 2013
5. Counselling including deposit of fee will be at Thapar : July 20, 2013
University (C-Hall).
6. Last round of counselling for vacant seats if any : July 29, 2013
Note :-
Candidates are advised to browse www.thapar.edu for any information related to activities mentioned in above & Counselling Schedule.
Eligibility Criteria (MBA - 2 Years Programme)
Admission to MBA will be open to candidate who obtains at least 60% marks in aggregate or 6.0 CGPA or equivalent grade in the qualifying examination from recognized university.
Qualifying Examination is as under:
BE/B Tech degree in any discipline OR M.Sc. /MA in Mathematics/Statistics/ Computer Science/Electronics/
Physics/Operations Research/Information Science/Information Technology or MCA
Admission to MBA programme will be on the basis of Master Merit List (MML).
Candidates appearing for CAT or MAT or CMAT will be considered for admission through GD and Personal Interview. The candidates who did not take CAT or MAT or CMAT will be required to take a formal test(ONLINE) to be conducted by LMT School of Management, Thapar University, Patiala as per schedule given above.
* The Derabassi campus is likely to be operational by July 2013. In case of any delay, the course will commence at Patiala campus and will shift to Derabassi campus as and when it becomes operational. The geographical location of 'Derabassi Campus' is at Dera Bassi (Mohali) on the periphery of UT of Chandigarh.
Intake
Thapar University may admit up to 90 students to MBA (Two years Programme) on the basis of the performance of applicant in Test, Group Discussion and Personal Interview. During this round (second), only the seats remaining vacant after the counseling of first round (to be held on March 9, 2013) shall be offered.
Reservation Policy for SC/ST, PH Candidates shall be followed as per University rules.
In addition to above seats, 1% over and above seats are reserved for children of employees of Thapar University. The candidates seeking admission under this category are required to satisfy the eligibility as mentioned above for General candidates.
IMPORTANT NOTE: Candidates appearing in the final exam of the qualifying degree (as mentioned in the Information Brochure) are eligible to apply, provided they have no backlog course(s) in any of previous semesters/ years of their study. Any discrepancy found during counseling or at a later date regarding results of previous semesters/years and other testimonials submitted, the candidate shall not be admitted and she/he shall forfeit his/her seat allotted. In other words, the candidates who have cleared all the courses offered prior to
final exam are eligible to apply and such candidates shall only be given time to deposit their proof of passing of final exam (of qualifying degree) by December 31, 2013. Such candidates shall have to furnish following Undertaking:
“I am applying on my own risk and responsibility as my final result of the Qualifying exam has not been declared.
I do hereby declare that I do not have any backlog paper in any of the previous semesters (Years) of study of the qualifying exam and also I do not expect any backlog in my final exam.
I assure you that I will produce the proof of passing of my Qualifying examination with the minimum percentage of marks required on or before December 31, 2013, failing which my admission shall stand cancelled and I shall not claim any right on any count whatsoever.”
Admission procedure
1. Candidates seeking admission in LM Thapar School of Management (LMTSOM), Thapar University (TU) shall fill up the application form available online on www.thapar.edu.
2. Kindly fill the complete details and you will get a ‘login id’ and ‘password’. Then take two print outs of the form. Paste a recent passport size photograph on it and send it to “Incharge Admission Cell’ Thapar University, Patiala (Punjab)-147004. The completed forms should be posted along-with a demand draft of Rs. 1500 /- in favour of Thapar University, Patiala-147004 (Pb.). You can pay the required amount online or attach DD (in favour of Thapar University and payable at Patiala).
Retain one copy of the completely filled form to be produced at the time of counseling.
3. The candidates who have deposited the fee, can generate their admit card by using their login id and password on www.thapar.edu. The candidate shall take
two print outs of ‘Admit Card”, paste latest photograph on each and then come to the Entrance test centre. Alongwith admit cards, the candidates are required to carry any one of the identity proof (Original) with them like Passport/Voter I Card/ PAN Card/ Driving License. One copy of the Admit card shall be retained by the Entrance Test centre. The candidate is required to produce the other copy (duly acknowledged by the examiner at test centre) at the time of document checking. The candidates are required to choose the entrance test centre as well as the slot (June 26-30, 2013) available during the online registration. Once slot is chosen, it cannot be changed thereafter.
4. The candidates who are in the final year of their study (qualifying exam) can also apply for any or all the MBA programmes. However, such candidates are required to submit proof of passing their qualifying exam on or before 31 July, 2013.In case of delay of declaration of result of qualifying exam by the University beyond July 31, 2013, the student shall be given time till December 31, 2013 to submit the result. In no case, student shall be given further extension beyond December 31, 2013 for the submission of the result.
5. The online entrance examination will be held on June 26-30, 2013 at various test centres across India. The Group Discussion (GD) & Personal Interview (PI) will be conducted at Thapar University Campus, Patiala on July 13-14, 2013.
6. The qualified candidates will be called for group discussion (GD) & Personal Interview (PI) and then on the basis of valid score of CAT/ MAT /CMAT/Online test of Thapar University, GD and Pl, a Master Merit List (MML) will be prepared. The qualifying marks in the Online test of Thapar University for general category are 20% and 15% for SC/ST category. Admissions under all the categories will be made on this basis of this MML.
7. In no case, the number of short-listed candidates to be called for Group Discussion and interview shall exceed 1500 in the first instance.
8. Candidates applying for FN or NRI categories are required to bring sponsorship affidavit as per format (Annexure-III) appended with this brochure. Such candidates are also required to bring equivalence certificate of their qualifying exam from Association of Indian Universities (AIU), 16 Kotla Marg, New Delhi.
o FN candidates are also required to submit 'Student Visa' for the duration of the programme.
o 'NRI' means a person with Indian passport and having passed the qualifying exam from outside India.
o 'FN' means a person with valid Foreign Passport.
o NRI/FN candidates are required to show their passport at the time of the counselling.
9. The original certificates and set of attested copies of the certificates are required to be produced at the time of group discussion and personal interview.
10. Every candidate must indicate in his/her application the category(ies) of reserved seats for which he/she wants to apply. If no mention is made about the category, the candidate will be considered only for the general category. No candidate will be considered for admission against a reserved category for which he/she has not applied.
11. Application complete in all respects should reach the “Incharge Admission Cell”, Thapar University, Patiala-147004, by 5.00 P.M. on or before June 10, 2013.
12. The University does not take any responsibility for postal delay or loss in transit of the application form/Demand Draft(in case fee paid through DD), withdrawal form or any other communication in this regard.
.
13. Candidates must be medically fit and must bring along with them a medical fitness certificate signed by Gazetted Medical Officer at the time of Counselling on the prescribed proforma (as per Annexure-II) failing which they will not be considered for admission. In case a candidate fails to deposit the fee at the time of his/her counseling, his/her admission shall stand cancelled.
14. WITHDRAWAL OF SEAT / REFUND OF FEE:
Candidate wishes to withdraw the seat, must submit the application to IN-CHARGE, ADMISSION CELL, Thapar University. The fee will be refunded after adjusting all the outstanding dues, if any.
Date of Receipt of Application
Amount to be refunded
(i)
On or before July 27, 2013
:
After deducting Rs. 1000/- of the total fee deposited.
(ii)
From the date of final counselling and upto September 30, 2013
:
50% Tuition Fee + 50% Development Fee + University Security and Alumni Fee + 50% of all Hostel dues (if applicable)
(iii)
After September 30, 2013
:
University Security + Alumni Fee
15. In case of a tie among candidates securing equal marks in the merit list, the same will be broken in accordance with the following criteria: (a) Candidate senior in age shall rank higher in order of merit. (b) In the case of a tie in age also, a candidate getting higher percentage of marks in the (10+2 or equivalent) shall be ranked higher in order of merit.
16. The provisions in this brochure may be changed by the competent authority without any notice.
17. For any classification/dispute, the decision of the Director, TU, Patiala shall be final and binding on the candidates.
18. Admitted candidates will have to submit the migration certificate from the earlier University/ Board within a month of their admission.
19 Seats, if any in the reserve categories remained unfilled; such vacant seats shall be filled by General category candidates on the basis of merit.
Important instructions:
1 Academic regulations are available on our website www.thapar.edu. Students must note down the amendments notified from time to time on University website.
2 Migration to Thapar University to the same programme or any other programme during the course from other Universities/Institutes/Colleges is not permitted.
3 Bulletins containing schedule of courses and detailed syllabi are available on the University website.
4 Notwithstanding the nature of a programme spread over more than one academic year, the regulations in force at the time a student joins a programme shall hold good only for the examinations held during or at the end of the semester. Nothing in these regulations shall be deemed to debar the University from amending the regulations subsequently and the amended regulations, if any, shall apply to all students old or new, as specified therein.
5 The statements made in this Brochure and all other information, contained herein are believed to be correct at the time of publication. However, the University reserves the right to make at any time, without notice, changes in and/or additions to the regulations of University and conditions governing the conduct of students, requirements for degree, fee and any other information, or statements contained in this Brochure either on its own or under any rules or regulations imposed by UGC/MHRD. No responsibility will be accepted by the University for hardship or expense encountered by its students or any other person for such changes, additions, omissions or errors, no matter how they are caused.
6 In case any student seeking admission/admitted , raises any dispute with regard to any order passed by the Admission Committee and/or enforcement, interpretation of the terms of the admission or any other matter covered by the Regulations of the University and/or the terms given in the Brochure, the same shall be settled by the Director of the University or his nominee, whose decision shall be final subject to the condition that the dispute, if any, is referred to the Director within 15 days from the date of arising of the dispute.
7 All disputes will be subject to jurisdiction of the Civil Courts, Consumer redressal
Forum at Patiala and for writs the Punjab & Haryana High Court at Chandigarh
only.
Scholarships
Three merit scholarship: One each of value full, half and quarter tuition fee as prescribed from time to time for general category of MBA student be awarded to the students of first and second year as per University norms.
One merit cum means scholarship equivalent to tuition fee and development fee shall also be given as per University norms.
Six tuition fee freeships @ one freeship per zone in each year of MBA program. The amount of freeship shall be equivalent to tuition fee prevailing to the concerned batch. Students seeking tuition freeships shall have to submit the domicile certificate at the time of applying the scholarship. North Zone: Jammu and Kashmir, Himachal Pradesh, Punjab, Uttarakhand, Uttar Pradesh and Haryana, UT Chandigarh. East Zone: Bihar, Orissa, Jharkhand, and West Bengal, UT Andaman & Nicobar Islands West Zone: Rajasthan, Gujarat, Goa and Maharashtra, UT Daman & Diu, UT Dadra & Nagar Haveli South Zone: Andhra Pradesh, Karnataka, Kerala and Tamil Nadu, UT Pondicherry, UT Lakshadweep Central Zone: Madhya Pradesh and Chhattisgarh. North East Zone - Assam, Sikkim, Nagaland, Meghalaya, Manipur, Mizoram, Tripura and Arunachal Pradesh.
For continuation of scholarship in subsequent years, he/she should maintain CGPA of 8.00 and no backlog(s).
Hostel facilities, Transportation facilities and recreational facilities at derabassi campus shall be provided by the University.
ACADEMIC CALENDAR 2013-14
Trimester I & IV Commencement of Classes - 22.07.2013 at 13:00 hrs. Teaching (12 weeks) - 22.07.2013 to 11.10.2013 (60 Days) Final Examination - 14.10.2013 to 20.10.2013
Trimester II & V Commencement of Classes - 21.10.2013 Teaching (2 weeks) - 21.10.2013 to 01.11.2013 (10 Days) Trimester Break I – 02.11.2013 to 10.11.2013 (9 days) Teaching (6 weeks) - 11.11.2013 to 20.12.2013 (30 Days) Trimester (Winter) Break II - 21.12.2013 to 05.01.2014 (16 days) Teaching (4 weeks) - 06.01.2014 to 31.01.2014 (20 days) Final Examination - 03.02.2014 to 09.02.2014
Trimester III & VI Commencement of Classes - 10.02.2014 Teaching (12 weeks) - 10.02.2014 to 02.05.2014 (60 Days) Final Examination - 05.05.2014 to 15.05.2014 Summer Break - 16.05.2014 to 20.07.2014
Note: Summer Training/Internship of 6 – 8 weeks for MBA - I Year students (after Trimester
- III) in Summer Break.
Tuition fee and other dues for MBA Programs (2013-14)
S.No. Details of fee Amount (In Rs.)
I Payable once on admission
i) Admission fee 6000 ii) University Security 5000 iii) Alumni fee 500 iv) Tracksuit for sports activities 750 v) Souvenir 500
Total - I 12750
II Payable each trimester
i) Tuition fee 60000 ii) Development fee 20000 iii) Students' Activity & Welfare Charges 2700 iv) Exam. Charges 400 v) Medical Fee & Insurance Charges 250
Total - II Rs 83350
TOTAL (I+II) Rs 96100
Tuition & Development fee per Trimester in the subsequent years will be as under
for second year ( 2014-15)
Amount
--- Tuition Fee
60000
--- Development Fee
20000
--- Other Charges
4000
payable each Trimester (in Rs.)
84000
NOTES:
 The fee as detailed above shall be paid at the time of counseling either by cash or by demand draft in favour of the Thapar University, Patiala and payable at Patiala. Candidates will be admitted only after receipt of full fees at the time of counseling.
 University security will be refunded when a student leaves the University.
 Alumni fee will be refunded if a student leaves without completing his/her degree.
Tuition fee and other dues for NRI/ FN category for MBA Programmes
DETAIL OF FEES (IN US $) PAYABLE ONCE (on admission) SAARC & GULF Nations Nations other than SAARC & GULF
i) Admission Fee 150 150 ii) University Security 150 150 iii) Alumni Fee 50 50 iv) Student's Facility Charges 50 50 Total - I 400 400
FEE - PAYABLE EACH YEAR
i) Tuition Fee 4000 7000 ii) Development Fee 3000 3000 Total - II 7000 10000
OTHER DUES - PAYABLE EACH YEAR
i) Students' Activity & Welfare Charges 240 240 ii) Examination Charges 35 35 iii) Medical fee & Insurance Charges 25 25 Total -III 300 300 Total - (I+II+III) US $ 7700 US $ 10700
Note:
 The fee in US $ as detailed above shall be paid only by demand draft in favour of the Thapar University, Patiala and payable at Patiala at the time of counseling. Rooms in hostel will be allocated only after receipt of full fees at the time of counseling.
 The fee can also be deposited by Demand Draft payable at Patiala in other foreign currencies equivalent to the amount in US$. In such cases the equivalence certificate issued by the Manager of Issuing bank is also required.
 University security will be refunded when a student leaves the University.
 Alumni fee will be refunded if a student leaves without completing his/her degree.
ROOM RENT & OTHER DUES FOR HOSTEL ACCOMODATION FOR MBA (2013-14)
A - General Students
DETAIL OF FEES (in Rs)
Shared Room
Single Room
HOSTEL DUES (ON TRI-SEMESTER BASIS)
Amount
Amount
a) Hostel Maintenance Charges
2000
2000
b) Room Rent
8000
13000
c) Electricity Charges
3500
4700
TOTAL HOSTEL DUES
13500
19700
In addition to above hostel fee extra nonrefundable additional electricity charges for AC shall be Rs. 15000/- p.a. for shared accommodation and Rs. 25000/- p.a. for single rooms. The entire payment shall be made before the occupation of the AC Rooms. The facility will be subject to availability of AC Rooms.
B - FN / NRI Students
DETAIL OF FEES ( in US $)
Shared Room
Single Room
Amount
Amount
HOSTEL DUES (PER ANNUM)
US$
US$
a) Hostel Maintenance Charges
1000
1200
b) Room Rent
c) Electricity Charges
TOTAL HOSTEL DUES
1000
1200
In addition to above hostel fee extra nonrefundable additional electricity charges for AC shall be US$ 400 p.a for shared accommodation and US$ 600 p.a for single rooms. The entire payment shall be made before the occupation of the AC Rooms. The facility will be subject to availability of AC Rooms.
Note :-
(i)
All Hostel dues are subject to change due to inflation or revision of electricity tariffs even for students
already enrolled.
(ii)
The Entire AC charges shall be paid before the occupation of the AC Rooms.
(iii)
The Hostel accommodation (including AC Room) will be provided subject to availability of Rooms.
Note:
 Room in hostel will be allocated only after receipt of full fees at the time of counseling.
 Candidates who want hostel facility are also required to bring Rs. 3500/- in cash to be paid to the Hostel Manager towards Mess Dues as detailed below :
i) Mess Caution Money (Refundable) = Rs. 3000
ii) Amenities fund per annum (Non-refundable) = Rs. 500
Other financial aids
 Group insurance: All the enrolled students of the programmes are covered under Group Insurance scheme. This policy covers a risk of Rs. 1.00 lakh (one lakh) in eventuality of occurrence of death of student due to accident. The coverage will be effective from start of the program of the relevant year.
 Amartya Siksha Yojna policy: The policy is for covering expenses to be incurred for the education of the student child. This policy benefits is given after happening of the accidental contingency to the insured parent/ guardian of
the insured student child for contribution of education in respect of the covered courses till completion of the course.
Accidental death/ permanent total disablement of the parent/ guardian who is to bear the expenses and in whose favour the policy has been issued.
"Accident" covers the contingency of death/ permanent total disablement resulting directly from external, violent and visible means.
The claim will be subject to the definition and coverage of Insurance Policy cover issued by the insurance company. The coverage will be effective from July 1st of the relevant year.
PLACEMENTS
A number of multinational and Indian business houses have been absorbing the students of LMTSOM in the past years, some of which have been highlighted hereunder in this section.
IBM
Crompton Greaves
TCS
BILT
Philips Avantha Power
LG Electronics
Accenture Group
HCL Group Capital IQ
Ranbaxy
Headstrong
Smart Cube
Trident
Group
ACC Oriental Carbon
and Chemicals
Libsys Corporation
National Engineering
Industries
GATI Limited Gensol Consultants
Four Soft Escorts
13.0 ADMISSION OF FN/NRI CANDIDATES (For all Programs):
15% over and above seats in each program/discipline are reserved for the FN/NRI candidates. Such candidates are not required to appear in the Entrance Test (except for PhD program).
For BE/BTech program:
Candidate should have passed 10+2 or equivalent examination with at least 60% marks in aggregate of three subjects, namely, Physics, Mathematics and any one subject out of Chemistry, Biology, Biotechnology and Computer Science
For all other programs except PhD:
Candidate should have obtained 60% marks in the qualifying examination as mentioned in the eligibility criteria of respective program/discipline.
For PhD program: Candidate should have obtained 60% marks in the qualifying examination as mentioned in the eligibility criteria of respective program/discipline and is also required to qualify in the entrance test to be conducted by TU for admission into PhD program.
‘NRI’ candidates are those who have passed the qualifying examination as mentioned in the eligibility from abroad. They are required to produce Passport at the time of admission.
Note: Candidates seeking admission under ‘wards of person working in Gulf’ must have passed 10+2 from Gulf.
‘FN’ candidates are those who are citizen of a country other than India. Persons of Indian origin (PIO) and wards of persons working in Gulf and South Asia also come under this category. 5% seats are reserved for wards of person working in Gulf and South Asia. All FN candidates are required to deposit their endorsed student visa to TU. The VISA should be valid for the prescribed duration of the program.
In addition to above,
1. The candidate must have passed the qualifying exam on or before the last date of registration.
2. The admission will be made on the merit of the aggregate marks in the qualifying exam. In case of a tie, the candidate senior in age shall rank higher in order of merit.
3. Candidates must bring following documents at the time of admission:
 Copy of the application form
 DMC of qualifying exam
 Character Certificate
 Date of birth certificate(Matriculation)
 Medical certificate
 Sponsorship Affidavit
 Demand Draft of fee in favour of the Thapar University, payable at Patiala.
 The original passport & photocopies of pages containing personal Information and Visa.
 Documentary proof showing the location of school/Institute where student is currently doing the qualifying exam.
 Transcript of the qualifying exam, if passed from Universities/Boards other than Indian.
4. The candidates seeking admission under this category having foreign qualification shall be required to furnish equivalence certificate of qualifying examination from AIU located in AIU House, 16 Kotla Marg, New Delhi, at the time of submission of completed application form.
5. Provisional admission shall be made on payment of US $ 100 or Rs 5500/- (Non-Refundable) vide Demand Draft in favour of the Thapar University, payable at Patiala. The admission will be regularized on the fulfillment of the conditions mentioned in the Prospectus and payment of full fee at the time of admission.
6. Provisional admission can be regularized on any working day before the start of session i.e before July 22, 2013. However, with the permission of Chairman Admission Committee, admission can be done after July 22, 2013 but in no case later than the last date of registration.
14 ACADEMIC CALENDAR 2013-2014
FIRST SEMESTER
-
Registration* (OTHER THAN FIRST YEAR STUDENTS)
22.07.2013 – 26.07.2013
-
Commencement of Classes
22.07.2013 at 13:00 Hours
-
Late Registration
(With late registration fee)
29.7.2013 to 12.08.2013(with late registration fee of Rs 1000/-)
-
Teaching (45 days)
22.07.2013 to 20.09.2013
-
Mid-Semester Test
23.09.2013 to 28.09.2013
-
Teaching (25 days)
30.09.2013 to 01.11.2013
-
Mid Semester Break
02.11.2013 to 10.11.2013
-
Teaching (20 days)
11.11.2013 to 06.12.2013
-
End Semester Examination
09.12.2013 to 21.12.2013
-
Winter Break (15 days)
22.12.2013 to 05.01.2014
SECOND SEMESTER
-
Registration*
06.01.2014 – 10.01.2014
-
Commencement of Classes
06.01.2014 at 13:00 Hours
-
Late Registration (with late registration fee)
13.01.2014 to 27.01.2014 (with late registration fee of Rs1000/-)
-
Teaching (45 days)
06.01.2014 to 07.03.2014
-
Mid-Semester Test
10.03.2014 to 15.03.2014
-
Teaching (45 days)
17.03.2014 to 16.05.2014
-
End Semester Examination
19.05.2014 to 31.05.2014
-
Summer Break (50 days)
01.06.2014 to 20.07.2014
Summer Training for BE students after Second Year
-
Survey Camp (4 weeks): For Civil Engineering Students
-
Practical/Workshop Training (6 weeks): For the Students of Disciplines other than Civil Engineering
* ‘Registration’ shall be treated as completed, provided:
 He/she has deposited the semester fee within the prescribed period for each semester.
 He/she has to secure a ‘fee slip’ from the accounts section to confirm registration within that prescribed period. Kindly bring the proof of deposit of fee to the accounts section to get the fee slip.
In case a student fails in either of the above within the prescribed time, he/she will be deemed as ‘not registered’ and can be registered only by paying ‘late registration fee of Rs 1000/- till the last dates of registration mentioned above. There shall be no registration after the elapse of period mentioned for ‘late registration’ above.
15 FEE AND OTHER DUES FOR THE VARIOUS PROGRAMMES (2013-14)
(A) FEE PAYABLE ONCE ON ADMISSION
PARTICULARS
ADMISSION
UNIVERSITY
ALUMNI
STUDENTS’ FACILITY CHARGES
TOTAL (Rs.)
FEE
SECURITY
FEE
ALL PROGRAMMES
8000
5000
500
1500
15000
(B) PAYABLE EACH SEMESTER
FOR SESSION
PROGRAMME
TUITION FEE
DEVLOPMENT FEE
STUDENTS' ACTIVITY & WELFARE CHARGES
EXAM. CHARGES
MEDICAL FEE & INSURANCE CHARGES
TOTAL (Rs.)
2013-14
BE/ BTECH
62000
31000
4000
1000
400
98400
BE (IE)-MBA
62000
31000
4000
1000
400
98400
LEET
62000
31000
4000
1000
400
98400
MCA(Regular)
62000
31000
4000
1000
400
98400
MSc
26000
9000
4000
1000
400
40400
ME/ MTECH-Reg
CSED,ECED,
MED,SMCA,EIED
35000
15000
4000
1000
400
55400
ME/ MTECH-Reg
Others
30000
15000
4000
1000
400
50400
ME/ MTECH(PT)
24000
15000
4000
1000
400
44400
PhD
22000
5000
4000
1000
400
32400
BCA-MCA
( first year)
62000
31000
4000
1000
400
98400
2014-15
BE/ BTECH
68000
35000
4000
1000
400
108400
BE (IE)-MBA
68000
35000
4000
1000
400
108400
LEET
68000
35000
4000
1000
400
108400
MCA(Regular)
68000
35000
4000
1000
400
108400
MSc
28000
10000
4000
1000
400
43400
ME/ MTECH-Reg
CSED,ECED,
MED,SMCA,EIED
38000
17000
4000
1000
400
60400
ME/ MTECH-Reg
Others
33000
17000
4000
1000
400
55400
ME/ MTECH(PT)
25000
17000
4000
1000
400
47400
PhD
23000
6000
4000
1000
400
34400
BCA-MCA
( second year)
68000
35000
4000
1000
400
108400
2015-16
BE/ BTECH
75000
40000
4000
1000
400
120400
BE (IE)-MBA
75000
40000
4000
1000
400
120400
LEET
75000
40000
4000
1000
400
120400
MCA(Regular)
75000
40000
4000
1000
400
120400
PhD
25000
6000
4000
1000
400
36400
BCA-MCA
(3rd yr)
Same as that of MCA program(2015-16)
2016-17
BE/ BTECH
82000
45000
4000
1000
400
132400
NOTE : (I)
Students whose study extends beyond the period shown above shall continue to pay the fee at the same rate of their last fee shown.
(II)
University reserves the right to revise the fee and other charges at any stage.
(III)
The fees mentioned above in the following years will be applicable to the students who get admission in the session 2013-14. This will not be applicable to the future batches.
(IV)
The fee for the 4th & 5th year of BE (IE) - MBA prog. shall be charged on trimester basis and the fee amount will be same as applicable to MBA students of that session.
(V)
The fee for the 3rd , 4th & 5th year of BCA-/MCA prog. shall be charged on semester basis and the fee amount will be same as applicable to MCA students (Regular) of that session.
FEE AND OTHER DUES FOR MCA (DISTANCE MODE)
S.No.
DETAIL OF FEES
Amount (Rs.)
I
PAYABLE ON ADMISSION
Admission fee
8000
Alumni Fee
500
TOTAL-I
8500
II
PAYABLE EACH SEMESTER
Registration Fee
2000
Tuition Fee
14000
Development Fee
3500
PCP Fee
5000
Academic Counseling Fee
1500
Examination Fee
1500
TOTAL-II
27500
TOTAL (I + II)
36000
TUITION FEE AND OTHER DUES PROPOSED FOR PG DIPLOMA IN PLANT
TRANSGENIC TECHNOLOGIES (ONE YEAR) FOR ADMISSION IN THE YEAR 2013-14
S.No.
DETAIL OF FEE (in Rs.)
AMOUNT(Rs)
I
A - PAYABLE ONCE ON ADMISSION
i) Admission fee
8000
ii) University Security
5000
iii) Alumni fee
500
iv) Student's facility charges
1500
TOTAL (A)
15000
II
B - PAYABLE EACH SEMESTER
i) Tuition Fee
20000
iii) Students' activity & Welfare Charges
4000
iv) Examination Charges
600
v) Medical fee & Insurance Charges
400
Total (B)
25000
Total (A+B) (in Rs.)
40,000
FEE AND OTHER DUES FOR THE VARIOUS PROGRAMMES FOR FN/NRI CATEGORY
(A) FEE PAYABLE ONCE ON ADMISSION
PARTICULARS
ADMISSION FEE
UNIVERSITY SECURITY
ALUMNI FEE
STUDENT'S FACILITY CHARGES
TOTAL (US$)
FEE
FEE
ALL PROGRAMMES
150
150
50
50
400
(B) PAYABLE PER ANNUM
PROGRAM
TUITION FEE
DEVELOPMENT FEE
STUDENTS' ACTIVITY & WELFARE CHARGES
EXAMINATION CHARGES
MEDICAL FEE & INSURANCE CHARGES
TOTAL (US$)
SGN
NOSGN
SGN
NOSGN
SGN
NOSGN
SGN
NOSGN
SGN
NOSGN
SGN
NOSGN
BE/ B-TECH
4000
7000
2000
2000
240
240
35
35
25
25
6300
9300
BE (IE)-MBA
4000
7000
2000
2000
240
240
35
35
25
25
6300
9300
MCA
3500
4000
500
1000
240
240
35
35
25
25
4300
5300
MSc/ M-PHIL
2125
3125
800
800
240
240
35
35
25
25
3225
4225
ME/ M-TECH
2125
3125
800
800
240
240
35
35
25
25
3225
4225
PHD
750
750
150
150
240
240
35
35
25
25
1200
1200
SGN: SAARC & GULF Nations
NOSGN: Nations other than SAARC & GULF
NOTE : (I)
Students whose study extends beyond the period shown above shall continue to pay the fee at the same rate of their last fee shown.
(II)
The fee for the 4th & 5th year of BE (IE) - MBA prog. shall be charged on annual basis and the annual fee amount will be same as applicable to MBA (NRI/FN) students of that session.
FEE AND OTHER DUES FOR MCA (DISTANCE MODE) for NRI / FN CATEGORY
S.No.
DETAIL OF FEES
Amount (US$
I
PAYABLE ON ADMISSION
Admission fee
150
Alumni Fee
TOTAL-I
150
II
PAYABLE (PER ANNUM)
Registration Fee
2200
Tuition Fee
PCP Fee
Academic Counseling Fee
Examination Fee
TOTAL-II
2200
TOTAL (I + II)
2350
ROOM RENT & OTHER DUES FOR HOSTEL ACCOMODATION
A - General Students
( I )
HOSTEL FEES
DETAIL OF FEES ( in Rs.)
SHARED ROOM
SINGLE ROOM
MULTISTORY NEW BOYS HOSTEL-J
HOSTEL DUES (PER SEMESTER)
(Rs.)
(Rs.)
(Rs.)
a) Hostel Maintenance Charges
3000
3000
3000
b) Room Rent
17000
19000
27000
c) Electricity Charges
5000
6000
6000
TOTAL HOSTEL DUES
25000
28000
36000
( II )
AC CHARGES
In addition to above hostel fee non-refundable additional yearly electricity charges for AC
shall be as under :-
S.No.
Particulars
(Rs.)
1
Shared Accommodation
15000
2
Single Accommodation
25000
B - FN / NRI Students
( I )
HOSTEL FEES
DETAIL OF FEES
SHARED ROOM
SINGLE ROOM
MULTISTORY NEW BOYS HOSTEL-J
HOSTEL DUES (PER ANNUM)
US$
US$
US$
a) Hostel Maintenance Charges
1000
1200
1500
b) Room Rent
c) Electricity Charges
TOTAL HOSTEL DUES
1000
1200
1500
( II )
AC CHARGES
In addition to above hostel fee non-refundable additional yearly electricity charges for AC
shall be as under :-
S.No.
Particulars
US$
1
Shared Accommodation
400
2
Single Accommodation
600
C- Hostel fee for students who undergo six weeks summer training
( I )
HOSTEL DUES
S.No.
Particulars
(Rs.)
a)
Hostel Maintenance Charges
750
b)
Room Rent
6000
c)
Electricity Charges
1250
TOTAL HOSTEL DUES
8000
( II )
AC CHARGES
In addition to above hostel dues non-refundable additional electricity charges for AC
shall be as under :-
S.No.
Particulars
(Rs.)
1
Shared Accomodation
6000
2
Single Accomodation
10000
Notes :-
(i)
All Hostel dues are subject to change due to inflation or revision of tariffs even for students already enrolled.
(ii)
The Entire AC charges shall be paid before the occupation of the AC Rooms.
(iii)
The Hostel accommodation/type of accommodation including AC Room will be provided subject to availability of Rooms.
(iv)
Hostel fee for six weeks summer training will be applicable only for new students.
(v)
Fee for Hostel-J will be charged on the basis of new fee fixed for that year.
(vi)
Students, who want Hostel facility are also required to bring Rs. 3500/- in cash to be paid to the Hostel Manager towards Mess Dues as detailed below :
a) Mess Caution Money (Refundable) = 3000
b) Amenities fund per annum (Non refundable) = 500
(vii)
The University security, if not claimed within 2 years from the date of award of degree, shall be forfeited
(viiii)
Alumni fee will be refunded if a student leaves without completing his/her degree
(ix)
University security will be refunded when a student leaves the University
(x)
The DoSA shall deal with all the matters related to functioning of hostels.
16 FEATURES OF UG & PG PROGRAMMES
16.1 TU follows the semester system and each semester includes 90 days of teaching.
16.2 To be eligible for the award of degree, the candidate is required to obtain a minimum CGPA of 4.50 for UG & MCA and 5.50 for ME/MTech/MSc/MPhil programmes.
16.3 In order to be eligible to sit for End Semester Examination in course(s) of any semester a student must have registered for course(s) and must have attended not less than 75% of total classes collectively in Lectures, Tutorials and Practicals in concerned paper(s).
16.4 Academic Regulations are available on our website www.thapar.edu as well as in the CD supplied with the Prospectus. Students must note down the amendments notified from time to time on University website.
16.5 Migration to Thapar University to the same programme or any other programme from other Universities/Institutes/Colleges is not permitted.
16.6 Bulletins containing schedule of courses and detailed syllabi of various disciplines of under-graduate and post-graduate programmes are available on the University website.
16.7 Notwithstanding the nature of a programme spread over more than one academic year, the regulations in force at the time a student joins a programme shall hold good only for the examinations held during or at the end of the semester. Nothing in these regulations shall be deemed to debar the University from amending the regulations subsequently and the amended regulations, if any, shall apply to all students old or new, as specified therein.
16.8 The statements made in this prospectus and all other information, contained herein are believed to be correct at the time of publication. However, the University reserves the right to make at any time, without notice, changes in and/or additions to the regulations of University and
conditions governing the conduct of students, requirements for degree, fee and any other information, or statements contained in this Prospectus either on its own or under any rules or regulations imposed by UGC/MHRD. No responsibility will be accepted by the University for hardship or expense encountered by its students or any other person for such changes, additions, omissions or errors, no matter how they are caused.
16.9 In case any student seeking admission/admitted to any disciplines available in the Thapar University, raises any dispute with regard to any order passed by the Admission Committee and/or enforcement, interpretation of the terms of the admission or any other matter covered by the Regulations of the University and/or the terms given in the Prospectus, the same shall be settled by the Director of the University or his nominee, whose decision shall be final subject to the condition that the dispute, if any, is referred to the Director within 15 days from the date of arising of the dispute.
16.10 All disputes will be subject to jurisdiction of the Civil Courts at Patiala City only.
16.11 The regular students of all the regular programmes are not allowed to join
any job till they complete all the requirements for the award of degree. Only part-time students are allowed to join job.
16.12 EVALUATION OF STUDENTS
The University strives to foster in the minds of engineering students the capacity for continuous learning and critical appriasal courage and integrity, a strong sense of service and professional ethos through an academic environment on the campus and through curricular and co-curricular activities.
At the end of the semester the students are awarded a letter grade in each course depending upon the overall performance. The evaluation is carried out through one mid semester test, one End-Semester Examination, unannounced and announced quizzes, laboratory exercises, tutorial work, home assignments, and seminars etc.
Letter grades will be awarded to the students as indicated below. Each letter grade indicates the level of performance in a course and has a grade point for purposes of computing the CGPA, as given below.
Letter Grade Performance Grade Point
A+ Outstanding 10
A Excellent 10
B Good 8
C Average 6
D Marginal 4
E Exposed 2
F Fail 0
I Incomplete
X Inadequate Attendance /Dropped/Unregistered
A+, A, B, C & D grades: These grades are the pass grades.
A+ grade shall be awarded in rare cases i.e award of this grade is not mandatory and shall be awarded where performance of the student is exceptional among the students getting A grade. Even the best student of any class needs to be good enough to be awarded the ‘A+’ grade.DoAA shall review all ‘A+’ grade to be awarded.
E, F, I, X grades: If these grades are awarded in any course then that course shall be termed as backlog course.
E grade: This grade is awarded when a student has attended at least 75% of the Lectures, Tutorials and Practicals (as per the teaching load of the course) and fails in the evaluation process.
F grade is a fail grade and student have to register for that course again when it is offered next. A student, who even having 75% attendance and after appearing in end semester exam scores very low marks shall be awarded ‘F’ grade.
X grade: This grade is also a fail grade and is awarded as a result of detention(s) on the basis of shortage of attendance. A student, who earns ‘X’ grade in a course, shall register for that course again when it is offered next. A student who is allowed to drop a semester shall also be awarded ‘X’ grade in the courses of dropped semester.
I grade: This grade is awarded when a student having good academic record is unable to appear in the end semester exam due to compelling reasons justifiable to Instructor in charge. The DoAA shall receive the application of the case alongwith relevant evidence before the award of grades so that if found fit, the student shall be awarded I grade by DoAA.
SGPA is the weighted average of all the grades awarded to a student in a particular semester. SGPA is computed by dividing the total grade points earned with the total number of credits registered in that semester.
SGPA = CjGj / Cj
where Cj denotes credit assigned to the jth course taken by the student in the concerned semester and Gj indicates the grade point equivalent to the letter grade obtained by the student in jth course.
CGPA is the weighted average of all the grades awarded to a student since his entry into the University up to and including the latest semester and is computed as follows.
CGPA = (Ci Gi) / (Ci)
where Ci is the number of credits assigned to ith course and Gi is the grade point equivalent to the letter grade obtained by the student in the ith course. When a student repeats a course, the new grade will replace the earlier one in the calculation of the CGPA.
While calculating CGPA , I or X grades secured by the student shall not be taken into account.
Dean, Academic Affairs, will approve registration of students who have backlog course(s) in each semester. However, the student may be allowed to study an equivalent course (against the backlog course), if necessary, with the approval of Dean of Academic Affairs. The decision of Dean of Academic Affairs with regard to their registration of courses in each semester would be final and binding on such students.
A student with ‘E’ or ‘I’ grade may opt for any of the following options.
(a) She/he may register for that course again when it is offered next in subsequent semester(s).
OR
(b) The student may register and appear for a single examination i.e Auxiliary Examination conducted immediately after the end semester exam in which he/she has earned “E” or “I’ grade, on a date notified by the DoAA office. The student will not have to attend any classes. A course Instructor will, however, be designated to conduct the examination and guide the student. The grades will be decided by the concerned Instructor in consultation with the Head of the Department.
If a student who gets E grade misses the Auxiliary Exam conducted immediately after the end semester exam in which he/she has earned ‘E’ grade, he/she shall have to register afresh for that course again when it is offered next i.e. she/he cannot appear in the subsequent Auxiliary Exams.
For MBA program: In a year, auxiliary exams will be conducted after 2nd and 3rd trimester. Further, the auxiliary exam after 2nd trimester shall be for the backlogs of first and second trimester and auxiliary exam after 3rd trimester shall be for the backlogs of third trimester only.
Grading in the auxiliary exam shall be done as under:
 The Auxiliary exam shall be treated as reconduct of the end semester exam of that course in just concluded semester.
 The grades shall be awarded by substituting the end semester marks with the marks secured in Auxiliary Exam.
 Candidates appearing with ‘E grade can be awarded ‘D’ grade as the maximum grade.
 The cut off limits of the exam conducted in just concluded semester shall be taken into consideration for award of grades.
The student will have to pay an examination fee to be notified by DoAA.
a) Summer Term: In addition to above, students securing ‘E’ or ‘F’ or ‘I’ or ‘X’ grade can be offered maximum of two backlog course(s) in summer term subject to availability of faculty. The schedule of summer term, the fees to be deposited and other relevant conditions will be subject to the approval of the Chairperson, Senate on the recommendation of DoAA. During summer term, if found fit, DoAA can allocate maximum of 3 courses to the final year students. Such relaxation shall be given only in the cases where students are left with 3 backlogs for completion of degree.
In the summer term, regular classes will be held if the number of students is 4 or more. The course will be offered as a self-study course if the number of students is less than four. The students with ‘F’ or X grade will not be allowed to take a course in Summer Term as a self-study course. An instructor will, however, be appointed and all the components of evaluation will be completed in each case. The decision of Chairperson, Senate in running these courses shall be binding on the students.
Semester examination results will be declared by Registrar’s Office after obtaining approval from DoAA.
Registrar shall publish the result of the students indicating their grades and the CGPA obtained, on the 10-point scale.
At the end of each semester (i.e., after End Semester Examination) students will be supplied a grade card indicating the grades secured in each course and up to date CGPA.
Once grades are submitted, any correction thereafter will only be made with the approval of Director on the recommendation of the DoAA.
When a student repeats a course the new grade will replace the earlier one in the calculation of the SGPA and CGPA.
If a student after obtaining pass grades (A/B/C/D) in all the courses at the end of the programme obtains a CGPA less than minimum CGPA required for the award of degree, he/she may be allowed by DOAA to improve the CGPA by studying the course(s) in which he/she has earned ‘D’ grade(s) provided the said courses are offered in the semester under consideration .First preference will be given to the professional course(s).This concession of additional semester (s) for improvement will be counted within maximum duration permissible for the programme.
16.13 MAKE-UP TEST
o There will be only one make-up test for a student who is unable to sit in Mid-Semester Test due to hospitalisation/immobilisation.
o The make-up test will be held after the Mid-Semester Test. The syllabus for this test will include the courses covered upto make up test.
o The duration and weightage of the make-up test shall be the same as that of Mid-Semester test.
o The marks obtained in the Make-up test will be subject to a maximum limit of 75% of the total marks for the make-up test in that course for performance evaluation.
16.14 MINIMUM REQUIREMENTS OF BE/BTech/MCA PROGRAMME
A student must study the courses given in the scheme and meet credit requirements as approved by the Senate.
A student will be allowed to continue in the BE/BTech/MCA programme only if:
(a) at the end of the first year, he/she
(i) secures a CGPA of greater than or equal to 3.70.
or
(ii) earns* a minimum of 50% of the credits offered in the approved scheme of courses in the first year.
(b) at the end of 2nd year, he/she
(i) secures a CGPA of greater than or equal to 4.50.
or
(ii) earns* a minimum of 60% of the credits offered in the approved scheme of courses in the first and second year.
* Only credits of those courses will be considered as earned credits in which the student has earned A or B or C or D grade.
Explanation: A student who fails to satisfy both the conditions mentioned in the above paras (i) and (ii) of clause (a) or (b), as the case may be, will be required to leave the University. For BE/BTech Lateral Entry Programme, only clause (b) will, however, be applicable.
A student is allowed to register in BE/BTech programme for a maximum of 30 credits per semester. The maximum period in which a student must qualify for the award of BE degree is six years failing which he/she is not allowed to continue his/her studies for the BE/BTech degree.
16.15 ABSENCE/DROPPING OF SEMESTER
Any student absents from the University with due permission of the DoAA due to illness, she/he will be permitted to rejoin provided the period of absence does not exceed one semester. If the period of absence is more than one semester or the absence is for reasons other than illness, the case will be referred to the Director by DoAA with his recommendations.
In case a student absents from the University without prior permission, she/he may be permitted to join back with the permission of the Director on payment of the penalty as approved by BOG, in addition to the prescribed fee for the period of absence.
In no case, the period of unauthorized absence will exceed one semester. If the period of unauthorized absence exceeds one semester, the student’s name will be struck off from the rolls of the University.
Any student who registers for a semester but attains less than 25% of the total attendance in each registered course will be considered as unauthorized absence.
In no case, the total period of absence shall exceed two semesters during student’s stay in the University. In that eventuality, the student’s name shall be struck off from the rolls of the University.
The total absence/dropping of semester (gap period) will be counted towards the total duration of the Programme permissible under the Regulations.
Any student has to put in equivalent number of additional semesters for the gap period to clear the courses. In no case, she/he will be eligible for award of degree in less than prescribed normal duration of study excluding the gap period. It is further stated that the courses of the gap period shall be available to the student only in the parallel semester(s) of the subsequent semesters.
Continuation Fee: Students will be charged continuation fee as equivalent to the prescribed fee of the dropped semester(s).
Appeal
Notwithstanding the above the Director may, on appeal, relax any of the conditions in case of extreme hardship, at his discretion. His decision shall be final and binding.
17 HOSTEL AND OTHER FACILITIES
17.1 HOSTELS
The University has nine hostels - six for boys and three for girls with state-of-the-art facilities. The total hostel accommodation for boys is over 2400 and for girls, about 700. This includes AC room accommodation for 120 boys and 98 girls.
The hostels are provided with all basic facilities including water coolers with water purifiers, washing machines, common TV room, common reading room, common gym, etc. Adequate dining facilities are available for all hostellers.
First year undergraduate students will be provided shared accommodation only. NRI/Foreign students may reserve their rooms in advance.
The Students must occupy rooms specifically allotted to them. However, in exceptional cases, concerned warden may allow students to change rooms. Change of accommodation from one hostel to another during a semester/term is generally not permitted. However, if the seats are available in another hostel, student is allowed to shift only after the approval of co-ordinating warden.
Allotment made to a student is subject to cancellation if he/she fails to occupy the room in the prescribed time. Students will also forfeit their rooms if they fail to clear their all dues to the hostel/mess by the prescribed time.
Hostel accommodation is allotted with the condition that the student agrees to abide by the rules and regulations of the hostel. A student shall be expelled from the hostel on violation of any rule and regulation.
It is mandatory for all the hostellers to take meals in the mess and to pay the Mess Dues. The ‘Mess Caution Money’ is refunded when the student vacates the hostel on production of ‘Dues Clearance Certificate’ from the Warden/Mess Manager.
Any damage/breakage to hostel property will call for severe disciplinary action. In case of any violation of hostel rules, suspected unlawful activities on the basis of security risk perceived, the coordinating warden reserves the right to break open rooms.
Accommodation in hostels is subject to availability.
17.2 HOSTEL DISCIPLINE
The hostellers are required to abide by the hostel rules. No student should stay away from his/her room during the night except with prior written permission of the warden. Any student, who wishes to leave the campus temporarily or otherwise, should obtain the permission of warden in writing. Those applying for
permission must state the date and time of his/her intended departure and return as well as the destination.
Students are advised to avoid partying, playing loud music, singing aloud, shouting or making all types of noises which are likely to distract the attention of other hostellers.
Pets of all kinds are prohibited inside the hostels. Feeding stray dogs or cats in the hostel premises is not permitted.
No male visitors are allowed to visit girl students in the hostel premises. Parents must supply the name of a local guardian for their wards.
Students are advised not to keep large cash or valuables in their hostel room. University will not be responsible for any loss, whatsoever.
Defaulters will be appropriately punished.
17.3 MEDICAL FACILITIES
The University has a well-equipped Health Centre and an Ambulance. The services of the Medical Officer and the Staff Nurse are available. Reimbursement up to 2000/- in an academic year is admissible for emergency cases duly recommended by the warden/medical officer.
17.4 CANTEEN AND OTHER FACILITIES ON THE CAMPUS
 Bank - State Bank of Patiala
 Post Office
 Stationery and Book Shop
 STD, Courier and Photocopier Booth
 Cafeteria
 Coffee Stall
 Grocery Shop
 Amul, Verka Stall
 Fruit, Juice Stall
 Departmental Confectionery Store
 Dry Cleaner / Laundry
 ATM
 Saloon/Parlour
 Multi Cuisine Restaurants.
18 SCHOLARSHIPS/TUITION FREESHIPS
18.1 Tuition freeship (Full tuition fee waiver) to Board toppers in 2013 exams (for student admitted in first year of BE/BTech)
The tuition fee of top two toppers of the recognized Boards of India in the exams held in 2013, who have been given direct admission to the first year of UG program i.e without the entrance test score shall be waived off provided they maintain minimum CGPA of 8.50 in subsequent semesters. Such candidates shall have to furnish proof of being toppers from their respective boards.
18.2 Tuition Freeships
In addition to above, 25 number of tuition freeships (full tuition fee waiver) are also available for BE/BTech.
If any student(s) admitted in the first year of BE/BTech on the basis of normalised rank of JEE (Main) has aggregate marks greater than 90% at 10+2 level(excluding FN/NRI candidates).Then full tuition fee will be waived off for the four years of his/her study. These waivers, once availed will be applicable to the four years of BE/BTech programme provided:
Conditions:
1. He/She has no backlog courses.
2. He/She has a minimum CGPA of 8.50.
3. He/She has not availed merit scholarship offered by the University.
4. He/She has a good conduct.
In case, the number of such students is more than 25, then first 25 students as per merit of All India Rank of normalized score of JEE (Main) will be given the freeship.
18.3. MERIT SCHOLARSHIP
Three merit scholarships, one each of value of full, half and quarter tuition fee respectively, as prescribed from time to time for general category of BE/BTech, MCA and MSc students, be awarded to the students in BE/BTech, MCA and MSc programme wise and year wise, admitted through entrance examinations.
Merit scholarships will be awarded only if the number of students registered in a discipline is at least five.
ELIGIBILITY
18.3.1 Only those students will be eligible for the award of University merit scholarships who have cleared all the courses prescribed for the respective programme upto the stage of the award. In other words, they should not have any backlog.
18.3.2 Award of Merit Scholarships in the first year of BE/BTech, MCA and MSc programme will be based on the merit of entrance test. In the subsequent years, these would be based on the AGPA earned by the student during the preceding academic year.
18.3.3 The student who has been awarded merit scholarship by the University are entitled to receive stipend or any financial assistance from any other source. However, if the student is awarded any stipend or financial assistance from any other source, he shall immediately communicate the same to Dean of Academic Affairs (DoAA).
18.3.4 There will be no income limit of the guardians/parents of the students for the grant of merit scholarships.
18.3.5 In case a student is eligible for more than one scholarship/freeship, he/she shall be awarded only one scholarship/freeship as per his/her preference.
18.4 Alumnus Ward Scholarship
Four scholarships @ 50,000/- per annum: One scholarship to one alumnus ward in each year of BE/BTech on merit-cum-means basis.
These scholarships are given by TU Alumni Association.
18.5 Selection
18.5.1 The award of merit scholarships for BE/BTech, MCA and MSc programmes shall be announced every year by the DoAA.
18.5.2 If the students declines (or is not awarded merit scholarship for certain reasons) it shall be awarded to the next student in the approved list.
18.5.3 The merit scholarships shall be tenable for one academic year.
18.6 Tie Breaker
In case of a tie at AGPA, it shall be broken by considering number of A+ grades secured by the students during the period under consideration for calculation of AGPA. If number of A+ grades secured by students are same then tie shall be broken by considering the students’ performance on the basis of CGPA. If the CGPA is also same, the tie shall be broken using the percentage of marks obtained by the students in all the courses of last two semesters ( 3 trimesters for MBA program). If, however, the tie still exists then it will be broken by considering the merit of the entrance examination taken at entry level.
18.7 Withdrawal
If a recipient of merit scholarship is found guilty of gross misconduct his/her case after due warning shall be reported by the DoAA for withdrawal of merit scholarship and decision in this regard will be taken by the Deputy Director.
18.8 Other Scholarships/Stipends
The details of other scholarships and stipends offered to the students are given in the Table I.
Table – I Scholarships and Stipends
S.No.
Nature of Scholarship
Value in Rs.
No. of Scholar ship(s)
Eligibility Conditions
1.
Merit-Cum-Means Scholarships
Tuition and Development Fee Waiver
BE/BTech: 06
ME/MTech: 05
MSc: 01
MCA: 01
MBA: 01
Entrance Test Rank/JEE (Main) normalized score (First Year) and Academic Performance in next years. Parent’s gross annual income from all sources <= 5.00 lakhs & other conditions.
Vimlasons Charitable
10,000 per annum
5
One each for girl student of 1st ,2nd
2.
Foundation Scholarships
,3rd and 4th year of UG programme and one girl student of MSc(1st or 2nd year) on merit cum mean basis.
Means: less than 2.00 lac.
Merit: minimum 75% marks in the 10th and 12th Board examination and will be renewed if the student has a minimum CGPA >=7.00 and with no backlog course.
3.
Vimlasons Charitable Foundation Scholarships
8,000 per annum
3
One for Post Graduate and two for LMTSOM students for merit cum means basis subject to conditions.
4.
A.C.Khanna-Balraj Chexal Scholarship
10,000 per annum
1
One BE Mechanical Engineering student of second year on the basis of merit.
5.
Shakuntla-Juneja Memorial Scholarship
10,000 per annum
1
One BE Civil Engineering student of 2nd year on the basis of merit.
6.
Prof R.K.Virmani Scholarship
10,000 per annum
1
One BE Mechanical Engg student of 3rd year or final year on the merit cum mean basis.
Means <= 2.4 lac per annum
Merit >= 6.00 AGPA
7.
Late Dr. H.S. Kasana Scholarship
10,000 per annum
1
2nd year MSc(Mathematics & computing) student who secures maximum CGPA in first year.
8.
Datar Kaur/Pritam Kaur Annual Scholarship
$500 per annum (Equivalent amount in rupees shall be given)
2
2nd year Student of any branch on merit cum means basis.
CGPA>=7.0 in first year
Means <= 2.00 lac per annum.
9.
Prem Sagar Gupta Merit Scholarship
5000 per annum
3
One each to BE Civil Engineering student of 2nd, 3rd and 4th year on merit basis.
10
Smt. Sudarshan Syanghal Sehgal
20,000 per annum
1
BE/BTech student of 1st year on merit cum means basis.
11
Dipesh Chawla Memorial Scholalrship
10,000 per annum
1
The best student in the BE (Civil) final year on the basis of CGPA at the end of 3rd year.
12
Late Swaraj Bedi Scholarship
10,000 per annum
1
Female student of 3rd /4th yr of BE/BTech. CGPA>=7.00, Means <= 2.00 lac per annum.
13.
Sardarni Mohinder Kaur Sidhu Memorial Scholarship
10,000 per annum
1
Topper of BE (Electrical Engg) at the end of 3rd year.
14.
Central Sector Scholarship Scheme of top class education
for SC students
Equivalent to tuition fee and other non-refundable charges as per guidelines of Centre Government.
10
First 10 SC students on merit whose family income does not exceed 4.50 lac per annum
15.
Central Sector Scholarship Scheme of top class education
Equivalent to tuition fee and other non-refundable charges as
5
First 05 ST students on merit whose family income does not exceed 2.00 lac per annum
for ST students
per guidelines of Centre Government.
16.
Punjab Govt. Post Matric Scholarship (SC/ST)
Special grant to SC/ST students
(c ) Punjab Govt. Post
Matric Scholarship
(OBC)
Freeship equivalent to the amount, sanctioned by the DTE, PB, Government of Punjab
125/- per month for Day Scholars.
250/- per month for Hostlers as per guidelines of Punjab Government.
Freeship equivalent to the amount, sanctioned by the DTE, PB, Government of Punjab
*
*
*
SC/ST student of Punjab State and family income should not exceed 2.00 lac per annum and as per guidelines by the Punjab Government.
SC/ST student of Punjab State and family income should be less than 60,965/- per annum, as per guidelines of Punjab Government.
Should be OBC student of Punjab State and family income per annum should not exceed the limit fixed by the Punjab Government, i.e., 1.00 lac/- per annum.
17 (A).
Post Matric Scholarship for students belonging to the minority communities.
Tuition fee and maintenance allowance per annum as per guidelines of Government.
*
Students who have secured not less than 50% marks in previous year final exam.
Family income should not exceed 2 lac per annum.
17 (B)
Merit cum means Scholarship for students belonging to the minority communities.
As per Govt guidelines available on website http://momascholarship.gov.in/
18.
Post Matric Scholarship to SC students
Equivalent to tuition fee per month as per the guidelines of respective State Government.
*
Should be SC student.
Other guidelines as per the respective State Governments.
19.
Special Scholarship Scheme for J & K students
Maximum 1.25 lac per annum as per guidelines of MHRD
*
Parent income should not exceed 4.50 lac per annum.
Student should belong to J & K and passed 12 or equivalent from state Board of J & K. Other conditions as per guidelines of MHRD
20.
National Scholarship
120/- Day Scholars
170/- Boarders
*
As per the guidelines by Punjab Government.
21.
National Talent Search Scheme Scholarship
500/- per month.
*
As per guidelines of NCERT, New Delhi.
22.
National Thermal Power Corporation Scholarship Scheme
18000/- per annum.
*
To be decided of the NTPC for SC/ST/Physically Handicapped students.
23.
Indian Oil Scholarship
750/- per month as per guidelines of Indian Oil Corp.Ltd.
*
Should be SC/ST student and to be decided by the Indian Oil Corp. Ltd. , New Delhi.
24.
Guru Harkrishan Educational Society Scholarship
500/- per month.
*
Students who have secured not less than 60% marks in the previous qualifying examination. Family income should not exceed 10,000/- per month and to be decided by the Society.
25.
Himachal Pradesh Govt. Stipend
300/- per month.
*
On the basis of poverty-cum-brilliance of Himachal State Students as per guidelines of the State Government.
26
Thapar University ‘class of 1965’ scholarship
Equivalent to the interest generated on amount donated by 1965 batch
*
Scholarship will be awarded to BE 3rd year student on the basis of AGPA (minimum 8.00) earned during the 2nd year of study and the merit of the project proposal submitted by the students of Civil/Mechanical/Electrical Engineering. Other guidelines are displayed at TU website.
27
Thapar University ‘class of 1987’ scholarship
Equivalent to the interest generated on amount donated by 1987 batch
*
To be decided by TU
*depends upon the issuing agency.
Notes : (i) Students nominated by the Government of India are also awarded Scholarship by their respective Governments.
(ii) Sponsored Industrial House Scholarhsip would also be available.
(iii) In case of any change regarding amount or eligibility for the Government
scholarships mentioned in above table, the latest circular shall be applicable.
(iv) For availing Government scholarships, Aadhaar enabled bank account or linking of existing bank account with Aadhaar number is required at the time of applying of scholarship of direct transfer of scholarship amount to the beneficiary, as per the guidelines issued by the Government from time to time.
19. DISCIPLINE:
In order that every student enjoys and contributes in creating and maintaining a congenial environment in the campus, students are expected to be aware of their responsibilities, behave in an orderly manner on all occasions, maintain discipline and obey such instructions as are notified from time to time. As adults, students are expected to have a fair sense of legal and illegal acts and conduct themselves in such a manner that shows respect to the rights of other persons inside the campus. They should conduct themselves both inside and outside the campus in such a manner which is befitting a university of this repute.
The defaulters will be dealt with strictness. Students will be subject to Disciplinary warning (verbal or written)/Disciplinary Probation or expulsion from the hostel/
university for a term basis or forever depending upon the severity of case. For major punishment such as expulsion/rustication from the University, making an adverse entry on the Character Certificate to be issued by the University and debarring a student from admission to any course offered by the University, etc. decision will be taken by the Deputy Director on the recommendation of Students Discipline Committee of the University chaired by Dean of Student Affairs.
Students Discipline Committee (SDC)
As approved by the Hon’ble Director, the Students Discipline Committee (SDC) of the University consists of the following ex-officio and other members:
i) Dean of Student Affairs (Ex-officio) Chairperson
ii) Four Professors of the University appointed Members
by the Director
iii) One member from outside the University Member
with judicial experience appointed by the Director
iv) Registrar (Ex-officio) Member
Students MUST possess their Identity Cards all the time and produce the same whenever asked for.
Use of Powered vehicles on the campus by the students is not allowed. However, day scholars are allowed motor bikes/scooters (not cars) upto University’s main parking lot only. Such vehicles should bear the authentication stickers issued by Thapar University. Speed limit to be observed by these vehicles inside the campus is 40 kmph only.
Cell Phones: Use of cell phone in the academic area is strictly prohibited.
Destruction/Defacing of University property: Anybody found indulging in destruction/defacing the university property will be punished.
Usage or possession of any forms of Alcohol/ Smoking/ Drugs etc. inside the campus is strictly prohibited. Defaulter will be subject to strict disciplinary action.
Involvement in any form of fights / physical manhandling/ indecent activities inside the campus will be dealt with strictness.
The entry timings for students at University main gates is 10.00 pm.
Lethal/Firearms: Students are not allowed to keep firearms, any other lethal weapons or any object on the campus, forbidden by law, which can cause any kind of harm to anybody.
STUDENTS ARE FORBIDDEN FROM ADDRESSING THE TRUSTEES OR THE MEMBERS OF THE BOARD DIRECTLY.
FORMATION OF CLUBS AND ASSOCIATIONS
No club or association may be formed in the University without the permission of the Director. Such Clubs or Association must be confined to co-curricular activities only.
Ragging, in any form, is banned on the University.
ANTI-RAGGING MEASURES : SUBMISSION OF AFFIDAVIT BY THE STUDENTS / PARENT/ GUARDIAN.
In view of Hon’ble Supreme Court Judgement and as per University Grants Commission regulations and directions from Hon’ble Supreme Court the students and parents/ guardians are required to submit affidavit on 10 non judicial stamp paper duly attested by the oath commissioner/notary with regard to curbing ragging menace.
Text of the affidavit is available on website.
Any one found indulging in ragging will be expelled from the university. Anti-ragging committees and squads of the university shall keep continuous vigil for the defaulters.
Ragging shall include, but will not be confined to the following:
Any disorderly conduct whether by words spoken or written or by an act which has the effect of teasing, treating or handling with rudeness any other student, indulging in rowdy or indisciplined activities which causes or is likely to cause annoyance, hardship or psychological harm or to raise fear or apprehension thereof in a fresher or a junior student or asking the students to do any act or perform something which such student will not do in the ordinary course and which has the effect of causing or generating a sense of shame or embarrassment so as to adversely affect the physique or psyche of a fresher or a junior student.
19.1. SEXUAL HARASSMENT
Thapar University is committed to creating and maintaining a community in which students, teachers and non-teaching staff can work together in an environment free of violence, harassment, exploitation, intimidation and stress. This includes all forms of gender violence, sexual harassment and discrimination on the basis of sex/gender or amongst the same sex members. Every member of the University should be aware that while the University is committed to the right to freedom of expression and association, it strongly support gender equality and opposes any form of gender discrimination and violence.
“Sexual Harassment” – For the purpose of this policy “Sexual Harassment” shall include, but will not be confined to the following:
 Unwelcome sexual advances, requests for sexual favours, and/or verbal or physical conduct of a sexual nature made, either explicitly or implicitly, in return for a term or condition of teaching/guidance, employment, participation or evaluation of a person’s engagement in any University activity.
 When Unwelcome sexual advances and/or verbal, non-verbal, or physical conduct such as loaded comments, remarks or jokes, letters, phone calls or through e-mail or any other communication mediums, gestures, showing of pornography, lurid stares, physical contact or molestation, stalking, sounds or display of a derogatory nature, have the purpose or effect of interfering with an individual’s performance or of creating an intimidating, hostile or offensive environment.
 Forcible physical touch or molestation; Eve teasing, innuendos and taunts, physical confinement against one’s will and any other act to impinge upon one’s privacy;
 Any act or conduct by a person in authority and belonging to one sex which denies or would deny equal opportunity in pursuit of education or career development, or otherwise making the environment at the University hostile or intimidating to a person belonging to the other/same sex.
 Any such conduct committed by a third party or outsider in relation to a student, teacher or non-teaching employee, or vice versa during the course of a person’s engagement with Thapar University.
All the complaints in this regard shall be made to the committee duly constituted by the Thapar University, Patiala.
19.2. STUDENT COUNSELING
Student counseling helps the students in solving their specific problems related to academics, personal, psychological etc. so that they are able to achieve academic excellence, develop an integrated personality during their stay on the campus.
The Counseling services cover all undergraduate and postgraduate students, with particular emphasis on improving academic performance of academically deficient students.
Counseling cell is headed by Chief Student Counselor who is assisted by one student counselor from each department/school. For general counseling, students can approach Chief Student Counsellor or any member of counseling team with their problems. Professional Counselors are also engaged from time to time on need basis.
19.3 STUDENTS CONSULTATIVE COMMITTEE (SCC)
To obtain the students feedback, TU has a Students Consultative Committee (SCC) comprising of ex-officio faculty representatives and over 100 student representatives from across the various disciplines. SCC’s objective is to assist the administration in preparing and implementing students’ welfare plans. SCC meets atleast twice a semester.
19.4 IDENTITY CARD
Every student will be issued an Identity-cum-Library Card, which is mandatory for every student to possess all the times. In case of loss of the this Card, an FIR must be lodged and 200 processing charges be deposited to get a duplicate card.
19.5 WORKSHOP UNIFORM
While in the University Workshop, every student must wear Khaki Shirt (with folded sleeves) with Khaki trousers (Girl students will wear Khaki Salwar Kameez). In the laboratories where there is machinery, student shall not wear loose dress. This is necessary both from the point of view of efficiency and safety. The students may use an overcoat or an overall in the Laboratories.
19.6 CAMPUS PLACEMENT
All prospective employers visiting the campus to recruit the graduating students are advised to put the following conditions in their letter of appointment:
(i) All the requirement for award of degree be completed before the date of joining.
(ii) CGPA of the student on graduation should not be less than that at the time of Campus recruitment. No relaxation in the said regard will be made under any circumstances.
20 PRIZES AND MEDALS
20.1 MEDALS AWARDED AT THE ANNUAL CONVOCATION
20.1.1 The President's Medal is awarded to a student who tops the list of
successful candidates in all the disciplines of final year BE/BTech Examination.
20.1.2 The University Medal is awarded to the students standing first (having
highest CGPA) in each discipline of BE,BTech, MCA, MSc and ME/MTech Regular Programmes.
Tie Breaker
In case of a tie at highest CGPA, it shall be broken by considering number of A+ grades secured by the students during the whole period of study at the University. If number of A+ grades secured by students are also same then tie shall be broken by considering the candidate’s performance on the basis of percentage of marks obtained in all the courses offered to them during their stay in the University. If, however, the tie still exists, then it will be broken by considering the percentage of marks obtained in the entry level qualifying examination. Thus only one candidate is expected to qualify for the award of medal in a particular discipline/programme.
20.1.3 S. Ranbir Singh Memorial Medal : This medal is awarded annually to the Best All round outgoing regular student of BE/BTech programme of the University in the memory of Late S.Ranbir Singh, one of the founder Trustees. In addition to this medal, a special prize of 20,000/- from the alumni Association will be awarded. In case, the all rounder student happens to be an alumnus ward, the said special prize shall stand enhanced to 25,000/.
20.1.4 Prof. V.Rajaraman's Computer Science/Engineering Award: A cash award of 1000/- will be given to the graduating student in BE (Computer Engineering) who attains the highest CGPA on completing the degree requirements.
20.1.5 Sardar Ram Singh Sidhu Memorial Medal: This medal is awarded annually to to the graduating student in BE (Electrical Engineering) who attains the highest CGPA on completing the degree requirements.
20.2 MEDALS & PRIZES AWARDED AT THE ANNUAL ACADEMIC PRIZE DISTRIBUTON FUNCTION
Award of Medals/Prizes would be based on the AGPA earned by the student during the preceding academic year. For the Second Year of BE/BTech programme, these will be awarded on the basis of combined merit of the students in all disciplines in their first year of BE/BTech Programme. For third and final year of BE/BTech programme these will be awarded discipline-wise in all the disciplines of BE/BTech Programme on the basis of AGPA of their preceding year. Medals will also be awarded to third year and second year of MCA, second year of MSc (Biotechnology) and ME/MTech regular programme in various disciplines on the basis of their AGPA of the preceding year. Students who have backlog courses or have dropped any semester shall not be given any medal/prizes.
20.2.1 Tie Breaker
In the eventuality of a tie for award of Medals/prizes in a class/discipline, the tie would be broken by considering number of A+ grades secured by the students during the period under consideration for calculation of AGPA. If number of A+ grades secured by students are same then tie shall be broken by considering the candidate’s performance on the basis of CGPA. In case of a tie at highest CGPA, tie would be broken by considering the candidate’s performance on the basis of percentage of marks obtained in all the courses of the last two semesters( 3 trimesters for MBA program) of the preceding year. If, however, the tie still exists, then it will be broken by considering the percentage of marks obtained in the entry level qualifying examination.
Provided further, that each candidate securing AGPA of 10.00 (10 point scale) and CGPA of 10.00 (10 point scale) shall be entitled for the award of medal notwithstanding any other provisions as mentioned above.
In any case total number of prizes shall not exceed three/two (as applicable) respectively.
The medal and prizes will be awarded only if the number of students registered in a discipline is atleast five.
20.3 ALUMNI WARDS PRIZES
Prize to alumni wards attaining 1st, 2nd or 3rd position in the class in each discipline from among all students in the final year of BE/BTech Programme.
First position 15,000/-
Second position 10,000/-
Third position 5,000/-
These prizes are given by the TU Alumni Association.
20.4 OTHER FINANCIAL AIDS
20.4.1 Group Insurance: All the enrolled students of the programmes are covered under Group Insurance scheme. This policy covers a risk of `1.00 Lakh (One Lakh) in eventuality of occurrence of death of student due to accident.
The coverage will be effective from October 1st of the relevant year.
20.4.2 Amartya Siksha Yojana Policy
The policy is for covering expenses to be incurred for the education of the student child. This policy benefits is given after happening of the accidental contingency to the insured parent/guardian of the insured student child for contribution of education in respect of the covered courses till completion of the course. Accidental death/permanent total disablement of the parent/guardian who is to bear the expenses and in whose favour the policy has been issued. "Accident" covers the contingency of death/permanent total disablement resulting directly from external, violent and visible means. The claim will be subject to the definition and coverage of Insurance Policy cover issued by the insurance company.
The coverage will be effective from October 1st of the relevant year.
20.4.3 Part time employment in Library and Projects @ 50/- per hour.
21. STUDENT ACTIVITIES
For overall development of the students’ personality, the University facilitates them thru University-wide as well as departmental societies/clubs/chapters. These societies provide forum for innovative minds to give expressions to their creative vision and to improve their technical skills:
UNIVERSITY SOCIETIES/CLUBS/CHAPTERS
1. ADVENTURE CLUB
A University Level Club ‘Adventure Club’ started in 2011. In a year, 15 Mountaineers, 49 Skiers and Alpinists, 12 Adventure Course Cadets. Over the year, Adventure Club gained a member of over 300 students from the university. Started modestly by organizing regular trekking excursions to various weekend destinations. Adventure Club has been to Prashar Lake, Triund, Solang-Nalla with rising participation in every trek. They were mostly organized on one weekend per month. Basic Mountaineering Course at Directorate of Mountaineering and Allied Sports, Manali during the summer vacation. Adventure Club also organized Skiing and Adventure Courses during winter vacation in Gulmarg, J.K. It serves as a perfect catalyst to rejuvenate after a long academic year for the students.
2. AMERICAN SOCIETY OF HEATING REFRIGERATION AND AIR-CONDITIONING ENGINEERS (ASHRAE).
3. BUSINESS ACUMEN FOR STUDENTS OF ENGINEERING (BASE)
To apprise students of business operations and to create in them business acumen with emphasis on Marketing & Finance.
4. CREATIVE COMPUTING SOCIETY (CCS)
For encouraging students to actively participate in computer and computing related activities over and above their curriculum.
5. DANCE CLUB ‘NOX’
To hone the dancing and social skills of the students, that contributes to their overall personality development. NOX club regularly invites professional choreographers on various Indian traditional and western dance forms to train the interested students.
6. FINE ARTS AND PHOTOGRAPHY SOCIETY (FAPS)
Fine Arts and Painting Society provides a forum to the young budding engineers to give an expression to their varied talents in the field of Fine Arts, Painting, Sketching, Photography, Rangoli making etc. various FAPS workshops take place throughout the year.
7. FROSH WEEK
The University understands the difficulties that a fresher student faces in moving from school life to professional university life. To combat these problems a special society has been formed in 2011 – Frosh Week Society specially with an objective to welcome the Freshers and introduce the University to them in a friendlier but systematic way. The work of society starts by welcoming the prospective students and their parents, providing them desired details and information. Later, for one week the society conducts interactive events and activities with a goal to make sure that first-year students have a warm welcome, and start out with effective introductions to fellow students and new academic pursuits. The unique series of events will introduce them to university environment including their faculty, peers, various places, shops and university life in general.
8. GAMES & SPORTS
The University has adequate facilities and avenues and encourages students to take part in different games and sports such as Cricket, Hockey, Football, Basketball, Volleyball, Lawn Tennis and Badminton as well as athletics and yoga/meditation practices etc.
Note : It is mandatory for all the students of the University to get themselves registered in any one of the notified sports activities in each semester.
9. INDIAN SOCIETY OF TECHNICAL EDUCATION (ISTE)
10. INDIAN YOUTH CLIMATE NETWORK (IYCN)
Thapar University has created another University Level Society ‘Indian Youth Climate Network (IYCN)’ in 2011 with the aim to work for the cause of protecting the climate. Strongly motivated about the environment especially climate Change. Thapar IYCN launched its flagship zero garbage campaign. The campaign aims at converting the University into India's very few zero waste campuses. In 2011, British Council selected 17 Climate Champions from India from nearly 4000 entries based on their green project and their leadership skills. Mr. Saket Dave, a student of Chemical Engineering was selected on the basis of IYCN Thapar University Chapter. International Climate Champions is a youth
oriented programme run by the British Council in partnership with The Energy and Resources Institute (TERI).
11. INSTITUTE OF ELECTRONICS & TELECOMMUNICATION ENGINEERS (IETE) – STUDENT FORUM
12. INSTITUTION OF ENGINEERING AND TECHNOLOGY (IET) CHAPTER
13. INSTITUTION OF ENGINEERS (IE) INDIA CHAPTER
14. INTERNATIONAL ASSOCIATION OF STUDENTS IN ECONOMICS & BUSINESS MGMT (AIESEC) CHAPTER
AIESEC in Thapar University started in 2011 with the intent of developing leaders for tomorrow. Leaders who are aware, tech-savvy, confident, humble, hard working and innovative via its various internship opportunities abroad. The opportunity to work in the most diverse conditions brought the best out of the students. Global projects for internships usually revolve around social causes with teams comprising of many nationalities. AIESEC has been active through the year with events like Global Village aimed at developing understanding and tolerance among students about different ethnicities and culture by learning about them. School of languages, which aimed at developing international professional skills among the students by teaching them with foreign languages and social culture. AIESEC has sent 16 students from the university on various Global Community Development Programs internationally.
15. LITERARY SOCIETY
Its objective is to inculcate literacy tastes, to improve oratorical, communication and sublime skills. This Society conducts series of events throughout the year and also brings out the Instituted magazine.
16. MICROSOFT .NET STUDENT CLUB
17. MUDRA (MUSIC AND DRAMATIC SOCIETY)
Its objective is to hone the extra-curricular skills of students in the area of Music, Dramatics etc. and developing creative skills contributing towards their overall personality; to organize several functions such as Izhaar an inter- year student competition.
18. NATIONAL SERVICE SCHEME (NSS)
To develop personality of the students through community service, the University also has national level activity under the National Service Scheme (NSS). The objective of NSS is to seek to raise social consciousness and provide students with opportunities to work with people in and around the educational campus creatively and constructively and put education to social use. NSS conducts various activities on Tree plantation, Health Checkups, Blood Donation Camps etc.
19. PRATIGYA SOCIETY (PS)
Started in 2005 as a student society to provide education and vocational training to underprivileged children in and around the campus. Pratigya is a unique model where students of Thapar university are main teaching recourses. They volunteer to teach after their class hours, maximum two hours a day. Classes are held in university classrooms earmarked for this purpose, between 5:00 pm to 7:00
pm, Monday to Friday. Currently around 70 students volunteers render their free services to society at large through pratigya. University provides all infrastructural support free of cost. Administration and faculty provide administrative and supervisory support. About 100+ kids, in the age group of 8 – 17 years, come to Pratigya every year. The subjects taught include English, Mathematics, Physics, Chemistry, Science, Moral Science, Hindi and Computers (in English, Hindi and Punjabi medium). Other than course curriculum, other activities carried out mainly during weekends include computer classes, drawing, painting and rangoli competitions, music and dance events, library visits, health and hygiene camps etc.
20. REDEFINING ENGINEERING (REDEE) SOCIETY
A new initiative started in 2011 to reach the students at a faster pace with higher speed using newer techniques. Sending sms for informing about any new activity/ information has been one of the initiative of REDEE.
21. ROBOTICS SOCIETY
To provide a platform to all the technical minds to come up and share their ideas to metamorph their dream ‘robots’ to reality. The prime principle of working would be learning and sharing.
22. ‘SANSKRITI’ SOCIETY
‘Sanskriti’ – a society for learning Indian Classical Music-Instrumental, with the aim to revive the fast depleting Indian Culture and our rich tradition by motivating the Thapar University students as well as the faculty, staff and their children to learn musical instruments.
23. SOCIETY FOR PROMOTION OF INDIAN CLASSICAL MUSIC AND CULTURE AMONGST YOUTH (SPIC MACAY) – THAPAR CHAPTER
This society organizes functions through out the country in which great artists give performances and demonstrate to students/youth the values of our culture. SPIC MACAY organised a cultural evening by Ms. Aliya Rasheed, an eminent vocalist from Lahore (Pakistan), a musical Concert by Pandit Tejendra Mazumdar who is a famous Sarod Vadak and Akram khan ji who is famous Tabla player, a play called ‘Buhe Baarian’ enacted by veteran actor and Sangeet Natak Academy Award winner, Ms. Neeta Mohindra, North Zone Convention dedicated to world renowned vocalist Smt. Gangubai Hangal, from Ist – 4th October, 2009. The inauguration was graced by photographer Padmashree Raghu Rai as the Chief Guest and performance on Mohan Veena by Padmashree and grammy award winner Pt. Vishwa Mohan Bhatt. The 4-day convention beautified with performances by many other maestros including vocal by Padma Bhushan Sh. Chunnulal Mishra, sufiana by Padmashree Puran Chand Wadali and Pyare Lal Wadali, puppetry by Sangeet Natak Academy winner Sh. Dadi Pudumjee, sarangi by Sh. Kamal Sabri, dhrupad by F. Wasifuddin Daggar, theatre by Sh. M.K. Raina, tabla by Sh. Sudhir Pandey, kathak by Rani Khanam and flute by Pt. Ronu Majumdar.
24. THAPAR ALUMNI STUDENT COMMITTEE (TASC)
To apprise the students of their role in the development of the Institute, Promote/enhance campus placement projecting TU appropriately, Establish rapport among the students, faculty and alumni in an effort to make the students feel proud of their Institute.
25. THAPAR MOVIE CLUB (TMC)
To help motivate, involve and promote appreciation (artistic, commercial and overall theme) of quality international and national films and foster an independent spirit of film criticism by the students and encourage them for critical writing on Indian and International cinema from the perspective of science, technology, technical education art and culture. The Thapar Movie Club was constituted with special powers and christened as a society thereafter. Few short films were screened and more will be screened in the coming weeks (Saturdays only). Besides, a short film on psychological effects of youth is being made. The movie is slated for upcoming GOA film festival. Down its years of inception TMC has won accolades for producing short documentaries (“Hazaron Kwashiyae Aise” on female feticide) which was honored both at national and international levels (UN first citizen award). All films produced will be subsequently screened for students once it completes the censoring process. This year TMS has showcased CINE- Youth, two day long festival specially to nurture and promote movie making and related skills among youths.
26. THAPAR MODEL UNITED NATIONS (TUMUN)
Thapar University has created a new University Level Society THAPAR MODEL UNITED NATIONS (TUMUN) in 2011 with the opportunity of representing specific countries on major international bodies of the UN.
Under TUMUN, TMUN Nations Conference was held on February 12, 16 hours of debate and discussion by 130 participants from across the nation
27. WORLD ALLIANCE FOR YOUTH EMPOWERMENT (WAYE) CLUB CHAPTER
The WAYE Club has been formed with an aim to channelize the potential of the youth by creating a drug-free, violence free society and attaching the youth with a social cause. WAYE (World Alliance for Youth Empowerment ) is a youth wing of the Art Of Living Organization, founded by H. H. Sri Sri Ravishankar, which has its presence in 157 countries today. In the Share-a-skill category, Vedic Mathematics workshop was organized by WAYE club which combined the ancient wisdom with the modern mathematical problems making calculations much faster and easier. Besides that a 30 day Guitar Class workshop also took
place and the funds generated were donated to another project of the Art Of Living organization- GIFT A SMILE (providing free education to a poor child). With its focus of providing a healthier and an effective academic environment, the club successfully organized two Basic Part-1 and four YES!+ courses and an Advanced meditation Course of the Art Of Living, for the faculty and students. A major feature of these courses was Sudarshan Kriya -A scientific breathing technique which when practiced regularity can eliminate stress leading to a more focused and peaceful state of mind.
28. YOUTH UNITED (YU) THAPAR CHAPTER
The chapter aims in creating Social Awareness, Youth Empowerment and Social welfare.
29. YOUTH WELFARE CLUB (YWC)
This society develops students’ personality through their exposure to the outer/adventurous activities, like: Inter-state site-seeing; Hiking and Trekking; Inter-state Cycling; Yoga; Talent-Hunt; painting, photography, public speaking, etc. YWC has maximum students enrolment and one of the very vibrant societies.
DEPARTMENTAL SOCIETIES
Departmental Societies cater to specific needs of related engineering / science / management stream.
1. ARETHA, LMT School of Management
2. Association of Chemical Intellectual and Developers (ACID), Department of Chemical Engineering
3. Indian Institute of Chemical Engineers (IIChE), Department of Chemical Engineering
4. Materials and Physics Society (MAPS), School of Physics and Material Sciences.
5. Renewable Energy Club (REC), Department of Mechanical Engineering
6. Society of Mechanical and Industrial Engineers (SOMIE), Department of Mechanical Engineering
7. Thapar Society of Civil Engineers (TSCE), Department of Civil Engineering
8. Society of Chemists for Promotion of Research & Education (SCORE), School of Chemistry & Biochemistry
Annexure-I
27. INSTRUCTIONS/GUIDELINES REGARDING COMPETENT AUTHORITY TO ISSUE CERTIFICATES
1. SCHEDULED CASTE CATEGORY
The format for SC Certificate is given as Annexure-II and the competent authorities to issue the certificate are as under.
(i) District Magistrate/Additional District Magistrate/Collector/Deputy Commissioner/Additional Deputy Commissioner/Deputy Collector/Ist Class stipendary Magistrate/City Magistrate/Sub-Divisional Magistrate/Talika Magistrate/Executive Magistrate/Extra Assistant Commissioner (not below the rank of Ist Class stipendary Magistrate).
(ii) Chief Presidency Magistrate/Additional Chief Presidency Magistrate/Presidency Magistrate.
(iii) Revenue Officer not below the rank of Tehsildar.
(iv) Sub-Divisional Officer of the area where the candidate and/or his family normally resides.
(v) Administrator/Secretary to Administrator/Development officer Lakshadweep Islands. (Circulated vide No. 2/223/79-SWT/4387 dated 8.6.96)
(vi) MLAs of the concerned constituency (Circulated vide No. 1/19/94-RCI/6045 dated 15.7.94)
2. SCHEDULED TRIBE CATEGORY
The competent authority to issue Scheduled Tribe certificate is same as given for Scheduled Caste category.
3. PHYSICALLY HANDICAPPED
The admission of candidates in this category will be made on the Submission of certificate to be issued by Chief Medical Officer of the District concerned, which should indicate the extent of disability. Minimum 40% disability is required to be eligible under this category.
However this provision will be subject to the decision of the Admission Committee of the University whether such a candidate would be able to pursue the studies at the University with his specific disability. The decision of the Admission Committee in this regard shall be final.
TU/ADMN/ACA/FT/07 (0)
Annexure-II
FORMAT OF CERTIFICATE OF SCHEDULED CASTE
Despatch No...................... Date.........................
1. It is certified that Mr./Ms. ............................................................……………………………… son/daughter of Sh.……..................................................................................……………………………………..of village/town ...............………….................. district/division …….............................…. State of Punjab belongs to ........................................................................Caste which has been recognised as Scheduled Caste as per “The Constitution (Scheduled Castes) Order, 1950”.
2. Mr./Ms. ………………………...................................................................... and his/her family lives in village/town ................................................................………………. district/division of Punjab State.
Place …………………………. Signature ………………………………………..
Date …………………………... Designation …………………………………….
State ………………………….. (with official seal of the officer concerned)
SCHEDULED TRIBE CERTIFICATE
Same as for Scheduled Castes Candidates.
TU/ADMN/ACA/FT/08(0)
ANNEXURE-III
FORMAT OF CERTIFICATE OF BACKWARD CLASS
1. This is to certify that Mr./Ms. ……………………………………………………………. son/daughter of Sh. …………………………………………………………… village/town ……………………………… in district/division …………………………………………….. of the State of Punjab belongs to the ……………………………………… Caste which is recognized as a Backward Class in terms of Punjab Govt. letter No. ……………………… dated …………………
2. This is also certified that he/she does not belong to any category of persons/sections mentioned in column 3 of the schedule to Govt. of Punjab, Department of Welfare letter No. 01/41/93-RCI/459 dated 17.1.1994 and No. 8/ 144/93-BS2/7017 dated 27.9.95.
3. Mr./Ms. ………………………………………….………………………. and/or his/her family ordinarily reside(s) in village/town …………………………………………………………. of district/division ……………………………………….. of the State of Punjab.
Place …………………………. Signature ………………………………………..
Date …………………………... Designation …………………………………….
State ………………………….. (with official seal of the officer concerned)
TU/ADMN/ACA/FT/08(0)
ANNEXURE-IV
FORMAT OF MEDICAL CERTIFICATE
I certify that I have carefully examined Mr./Ms. ……………….………………………………… son/daughter of Sh. ………………………………………………………………………………. His/her age is about ………………………..
His/her Chest Measurement is Unexpanded …………………. Cm
Expanded ……………………. Cm
His/her eyesight is upto the prescribed standards.
Details of glasses, if worn …………………………………………………………………
He/she has no disease or mental or bodily infirmity unfitting or likely to unfit him/her in the future for active outdoor service.
Blood Group____________________
Marks of identification
Thumb impression
HEPATITIS “B” IMMUNISATION? Yes No
Dated ………………………
Signature of Gazetted Medical Officer
(with official Seal)
Signature of Candidate
Attested passport size recent photograph
TU/ADMN/ACA/FT/10 (1)
Annexure-V
FORMAT OF SPONSORSHIP AFFIDAVIT FOR ADMISSION TO BE/BTech/MCA/MSc/ME/MTech/MPhil/PhD PROGRAMME
(To be submitted by NRI, FN Candidates)
I ............................................……............ son/daughter of Sh. ............…............................................ resident of ................................................................................, am NRI being Permanent Immigrant*/ on H-1 Visa* /Citizen* (Other than Indian Citizenship) in……………………………….............(Country) since…………………………….. and I, hereby sponsor my ward Mr./Ms .................................................................................. who is seeking admission to BE/BTech/MCA/MSc/ME/MTech/MPhil Programme under Non-Resident Indian/ Foreign National Category at Thapar University, Patiala. My ward has passed his/her 10+2 /equivalent examination from …………………………………………..(Name of the Country).
I further declare and affirm that I shall be responsible for timely payment of prescribed tuition fee in US$ and all other dues and charges to the Thapar University, Patiala, immediately after the admission is granted to the above candidate and also during subsequent years of studies.
Tuition fee shall be paid by me in the form of bank draft in US$ payable to the Registrar, Thapar University, Patiala, along with a bank certificate for encashment of foreign currency of the like amount.
In addition to tuition fee, I shall pay all other dues and charges to the Thapar University, Patiala, as payable by other students of the same class belonging to same category in foreign currency or in Indian Rupees, as per University Rules and Regulations.
Date.........................
DEPONENT
VERIFICATION
I solemnly state and affirm that the contents of my above affidavit are true to the best of my knowledge and belief.
DEPONENT
Note: The above affidavit should be attested by a Notary Public or First Class Magistrate.
* Strike out whichever is not applicable.
TU/ADMN/ACA/FT/40(0)
Annexure-VI
FORMAT OF CERTIFICATE FOR SPONSORED CANDIDATES
(for candidates applying for ME/MTech Programmes)
I certify that Mr./Ms. ………………………………………………………………………………… son/daughter of Sh. ……………………………………………………………………… is currently employed in our organisation as …………………………………….. from ………………………. He/She will be granted study leave for pursuing the programme …………………………………… at Thapar University, Patiala. All the expenses till the completion of the programme will be borne by us. Further certified that the candidate will not be withdrawn before the completion of the programme.
Place ………………….. Signature
Date ………………….. (with official seal)
TU/ADMN/ACA/FT/41(0)
Annexure-VII
FORMAT OF
CERTIFICATE BY PRINCIPAL OF THE INSTITUTION LAST ATTENDED
(Not required for candidates applying for PhD Programme)
Certified that Mr./Ms. ……………………………………………………………….. son/daughter of Sh. ………………………………….……………………………….. bears a good moral character and according to the School/College record, his/her date of birth is (in words) ……………………………………………………………………………………………………. and his/her sUniversity/Board Registration No. is ………………….
Place ………………….. Signature
Date ………………….. (with official seal)
Annexure-VIII
TU/ADMN/ACA/FT/42(0)
Format of Income Certificate
(Not required for Candidates applying for PhD Programme)
CERTIFICATE FROM THE HEAD OF THE OFFICE WHERE
FATHER/GUARDIAN OF THE STUDENT IS EMPLOYED
Certified that Sh. …………………………………….. S/o Sh. .…………………………………….. and father of Mr./Ms. ………………………………………………………… is employed in this office as …………………………………… and the details of his monthly salary are given below:
Basic Pay (Rs.) Grade pay DA CCA Any other Allowance Total
Place ………………….. Signature of Head of Office
Date ………………….. (with official seal)
OR
Declaration (duly attested by Notary Public) to be deposed by father/guardian who
is not employed but is running his own business
I …………………………………….. S/o Shri ……………………………………….. and Father/Guardian of Mr./Ms. ……….………………………………………… and resident of ……………………………………………………………………… do hereby solemnly declare that I am not employed anywhere and I am carrying on my own business (name of business) ……….…………………………..………………… at …………………………………… (Place). My average gross monthly income is Rs. ……………………
Place …………………….. Signature of Father/Guardian
Date ……………………..
Note: Candidates whose father/guardian has retired from Govt. service should produce pension certificate in support of their income at the time of counselling.
Annexure-IX
FORMAT OF CERTIFICATE FOR CHILDREN OF EMPLOYEES OF PUNJAB GOVT. POSTED/DEPUTED OUTSIDE PUNJAB
CERTIFICATE FROM THE HEAD OF THE OFFICE WHERE
FATHER/MOTHER OF THE CANDIDATE IS EMPLOYED
Certified that Sh./Smt …………………………………….. S/D/o Sh. .…………………………………….. and father/mother of Mr./Ms. ………………………………………………………… is a Punjab Government employee and is posted/deputed in this office as …………………………………… and the details of his/her services are given below:
Place of working (present) : __________________________
___________________________(State)
Date of joining the Present Job____________________________
Place ………………….. Signature of Head of Office
Date ………………….. (with official seal)
Annexure-X FORMAT OF GAP PERIOD AFFIDAVIT I______________________________(Name) S/D/o Shri__________________________________ and resident of _____________________________________________________(address) do hereby declare that I was not involved in any kind of illegal or unlawful activity during the period____________________________________(mention the period of GAP).
(Signature)
Annexure-XI
FORMAT OF UNDERTAKING TO BE GIVEN BY CANDIDATES OF LEET/MCA/MSc/ME/MTech/MPhil/PhD PROGRAMS IF THEIR FINAL RESULT OF QUALIFYING EXAM IS NOT DECLARED
Such candidates have to furnish following undertaking at the time of document checking/’In Person’counselling.
“I _______________________________ s/d/o Sh ______________________________am applying on my own risk and responsibility as my final result of the Qualifying exam has not been declared.
I do hereby declare that I do not have any backlog paper in any of the previous semesters (Years) of study of the qualifying exam and also I do not expect any backlog in my final exam.
I assure you that I will produce the proof of passing of my Qualifying examination with the minimum percentage of marks required on or before December 31, 2013, failing which my admission shall stand cancelled and I shall not claim any right on any count whatsoever.”
Dated:________________ Signature of candidate
Signature of Father/Mother
ANNEXURE-XII FORMAT OF ANTI RAGGING AFFIDAVIT BY PARENT/ GUARDIAN I, Mr. /Mrs./Ms. _____________________________________________________ (full name of parent / guardian) father/mother/guardian of ________________________ (full name of student with admission/ registration/ enrolment number), having been admitted to _________________________ (name of the institution) have received a copy of the UGC Regulations* on Curbing the Menace of ragging in Higher Educational Institutions, 2009, (hereinafter called the “Regulation”), carefully read and fully understood the provisions contained in the said Regulations. (* The copy is also available on www.thapar.edu) 2. I have, in particular, perused clause 3 of the Regulations and am aware as to what constitutes ragging. 3. I have also, in particular, perused clause 7 and clause 9.1 of the Regulations and am fully aware of the penal and administration action that is liable to be taken against my ward in case he/she is found guilty of or abetting ragging, actively or passively, or being part of a conspiracy to promote ragging. 4. I hereby solemnly aver and undertake that : 1. My ward will not indulge in any behaviour or act that may be constituted as ragging under clause 3 of the Regulations. 2. My ward will not participate in or abet or propagate through any act of commission or omission that may be constituted as ragging under clause 3 of the Regulations. 5. I hereby affirm that, if found guilty of ragging, my ward is liable for punishment according to clause 9.1 of the Regulations, without prejudice to any other criminal action that may be taken against my ward under any penal law or any law for the time being in force. 6. I hereby declare that my ward has not been expelled or debarred from admission in any institution in the country on account of being found guilty of, abetting or being part of a conspiracy to promote, ragging; and further affirm that, in case the declaration is found to be untrue, the admission of my ward is liable to be cancelled. Declared this ________________ day of ______________month of __________year. _______________________ Signature of deponent Name: ____________________________ Address: __________________________ __________________________ __________________________ Telephone / Mobile No.: _____________
VERIFICATION Verified that the contents of this affidavit are true to the best of my knowledge and no part of the affidavit is false and nothing has been concealed or misstated therein. Verified at ____________________ (place) on this the _____________day of ______ of month, ________________ year. __________________________ Signature of deponent Solemnly affirmed and signed in my presence on this the ____________ day of ______ month of _____________ year after reading the contents of this affidavit. OATH COMMISSIONER
ANNEXURE-XIII FORMAT OF ANTI RAGGING AFFIDAVIT BY THE STUDENT I, _____________________________________________________ (full name of student with admission/ registration/ enrolment number), S/o D/o Mr. / Mrs./ Ms. ________________________ (full name of parent / guardian) having been admitted to _________________________ (name of the institution) have received a copy of the UGC Regulations* on Curbing the Menace of ragging in Higher Educational Institutions, 2009, (hereinafter called the “Regulation”), carefully read and fully understood the provisions contained in the said Regulations. (* The copy is also available on www.thapar.edu) 2. I have, in particular, perused clause 3 of the Regulations and am aware as to what constitutes ragging. 3. I have also, in particular, perused clause 7 and clause 9.1 of the Regulations and am fully aware of the penal and administration action that is liable to be taken against me in case I am found guilty of or abetting ragging, actively or passively, or being part of a conspiracy to promote ragging. 4. I hereby solemnly aver and undertake that : 1. I will not indulge in any behaviour or act that may be constituted as ragging under clause 3 of the Regulations. 2. I will not participate in or abet or propagate through any act of commission or omission that may be constituted as ragging under clause 3 of the Regulations. 5. I hereby affirm that, if found guilty of ragging, I am liable for punishment according to clause 9.1 of the Regulations, without prejudice to any other criminal action that may be taken against me under any penal law or any law for the time being in force. 6. I hereby declare that I have not been expelled or debarred from admission in any institution in the country on account of being found guilty of, abetting or being part of a conspiracy to promote, ragging; and further affirm that, in case the declaration is found to be untrue, I am aware that my admission is liable to be cancelled. Declared this ________________ day of ______________month of __________year. _______________________ Signature of deponent Name: ____________________________ VERIFICATION Verified that the contents of this affidavit are true to the best of my knowledge and no part of the affidavit is false and nothing has been concealed or misstated therein. Verified at ____________________ (place) on this the _____________day of ______ of month, ________________ year. __________________________
Signature of deponent Solemnly affirmed and signed in my presence on this the ____________ day of ______ month of _____________ year after reading the contents of this affidavit. OATH COMMISSIONER
ABBREVIATIONS USED
Abbreviation
Description
AGPA
Annual Grade Point Average
AICTE
All India Council for Technical Education
JEE
Joint Entrance Examination (Main)
AIU
Association of Indian Universities
AR(A)
Assistant Registrar (Academic)
AR(SP)
Assistant Registrar (Store Purchase)
AR(FA)
Assistant Registrar (Finance & Accounts)
AR(IAC&L)
Assistant Registrar (Internal Audit Cell & Legal)
AR(PS)
Assistant Registrar (Personnel Section)
BCA-MCA
Dual Degree Bachelor of Computer Applications-Master of Computer Applications
BE
Bachelor of Engineering
BESD
Bio-technology & Environmental Sciences Department
BTech
Bachelor of Technology
CITM
Centre for Information and Technology Management
CED
Civil Engineering Department
CGPA
Cumulative Grade Point Average
CHED
Chemical Engineering Department
CILP
Centre for Industrial Liaison & Placement
CL
Central Library
CMO
Chief Medical Officer
CORE
Centre of Relevance & Excellence
CMS
Construction and Maintenance Section
CSED
Computer Science & Engineering Department
CW
Central Workshop
CDED
Continuing and Distance Education Department
DOFA
Dean of Faculty Affairs
DOAA
Dean of Academic Affairs
DORPG
Dean of Resource Planning & Generation
DORSP
Dean of Research & Sponsored Projects
DR(A)
Deputy Registrar (Academic)
DOSA
Dean of Student Affairs
DSc
Doctor of Science
ECED
Electronics & Communication Engineering Department
EIED
Electrical & Instrumentation Engineering Department
ESE
End Semester Examination
FN
Foreign National
FO
Finance officer
GEN
General Category
GO
General category-outside Punjab
GP
General category- Punjab
HC
Health Centre
HOD
Head of Department
MCA
Master of Computer Applications
ME
Master of Engineering
MED
Mechanical Engineering Department
MHRD
Ministry of Human Resource Development
MSc
Master of Science
MST
Mid Semester Test
MTech
Master of Technology
MUDRA
Music and Dramatic Society
NAAC
National Assessment and Accreditation Council
NRI
Non Resident Indian
NSS
National Service Scheme
OPAC
Online Public Access Catalogue
OPD
Out Patient Door
PG
Post Graduate
PH
Physically Handicapped category
PhD
Doctor of Philosophy
S (GAS)
Superintendent General Administration Section
LMTSOM
Lalit Mohan Thapar School of Management
SCBC
School of Chemistry & Bio-Chemistry
SCC
Students Consultative Committee
SCP
Scheduled Caste
SC/ST
Scheduled Caste/ Scheduled Tribe category
SGPA
Semester Grade Point Average
SMCA
School of Mathematics & Computer Applications
SMO
Senior Medical Officer
SBSBS
School of Behavioral Science and Business Studies
SEE
School of Energy and Environment
SPGC
Senate Post Graduate Committee
SPMS
School of Physics & Material Science
STEP
Science and Technology Entrepreneur’s Park-TIET
ST
Scheduled Tribe
SUGC
Senate Under Graduate Committee
SURF
Summer Undergraduate Research Fellowships
TCIRD
Thapar Centre for Industrial Research and Development
TCPC
Training-Cum-Production Centre
TU
Thapar University
TPC
Thapar Polytechnic College
TTC
Thapar Technology Campus
UG
Under Graduate
UGC
University Grants Commission

CBSE Counselling and Results 2013